science lab equipment manufacturer

Search

Search

Search by Alphabet

Compaction Pedestal For Testing Lab for Bitumen Testing Lab

BT-0024

Compaction Pedestal (NBTE-M24) for Bitumen Testing - Comprising a 300mm sq x 25mm thick steel plate complete with 4 tie rods and securing nuts. A mould clamp and hammer guide are fitted to the ...

Cement Sampler For Testing Lab for Cement Testing Lab

CT-0001

Cement Sampler for Cement Testing - This is a metal tube roughly 53 cm long and 2.8 cm I.D. with a wooden handle. Add up to length roughly 73cm. The tube has the sharp precise edge which helpfully ...

Blaine's Air Permeability Apparatus For Testing Lab for Cement Testing Lab

CT-0002

Blaine\'s Air Permeability Apparatus for Cement Testing - The mechanical assembly is utilized for deciding the fineness of concrete regarding particular surface communicated as an aggregate surface...

VICAT Needle Apparatus For Testing Lab for Cement Testing Lab

CT-0003

VICAT Needle Apparatus for Cement Testing - This instrument is utilized for deciding the ordinary consistency and setting times of concrete and \'A\' class limes. The device comprises of a metallic...

VICAT Needle Apparatus with Dashpot For Testing Lab for Cement Testing Lab

CT-0004

VICAT Needle Apparatus with Dashpot for Cement Testing - Same as Vicat Needle Apparatus however furthermore is fitted with a dashpot which offices delicate bringing down of the needles. Embellishme...

Ring Mould For Testing Lab for Cement Testing Lab

CT-0005

Ring Mould for Cement Testing - Comprises of mold 10cm x 0.5cm. Deep and a glass base plates.

GILLMORE Needle Apparatus For Testing Lab for Cement Testing Lab

CT-0006

GILLMORE Needle Apparatus for Cement Testing - This instrument is utilized for deciding the time setting of water powered bond. A base with a Vertical shaft and Two even arms. The lower arms is fle...

Flow Table For Testing Lab for Cement Testing Lab

CT-0007

Flow Table for Cement Testing - This is utilized for deciding the workability of building limes. The flow table comprises of a 30 cm dia clean steel plate with 3 engraved annular circles 7, 11 and ...

Flow Table: for determining the flow of cement concrete For Testing Lab for Cement Testing Lab

CT-0008

Flow Table for Cement Testing - determining the flow of cement concrete. Comprises of a steel table best 76.2cm (30 inch. Dia) Finely machined. The basic cast ribs are intended for support and stre...

Flow Table (Motorised) For Testing Lab for Cement Testing Lab

CT-0009

Flow Table (Motorised) for Cement Testing - Same as above but electrically operated to raise and drop the table top, approx. 15 times in 15 seconds, Suitable for operation on 230 Volts, 50 cycl...

Flow Table: Used for measuring the consistency of pozzolana For Testing Lab for Cement Testing Lab

CT-0010

Flow Table for Cement Testing - This is utilized for measuring the consistency of pozzolana and furthermore concrete mortar and hydrated lime. It comprises of a machined metal table best 250+/ - 2....

Flow Table (Motorised) -Used for measuring the consistency of pozzolana For Testing Lab for Cement Testing Lab

CT-0011

Flow Table (Motorised) for Concrete Testing - Same as above but electrically operated. Fitted with a motor, connected to the cam shaft through a reduction gear to give approximately 100 R.P.M. ...

LE Chatelier Mould For Testing Lab for Cement Testing Lab

CT-0012

LE Chatelier Mold for Cement Testing - It is utilized for the assurance of soundness by extension technique for ordinary and rapid hardening Portland bond, low warmth Portland concrete and class \'...

LE Chatelier Water Bath For Testing Lab for Cement Testing Lab

CT-0013

LE Chatelier Water Bath for Concrete Testing - Double walled internal chamber in stainless steel external chamber in gentle steel temperature extend Ambient to 100°C controlled by a capillary ther...

LE Chatelier Flask For Testing Lab for Cement Testing Lab

CT-0014

LE Chatelier Flask for Cement Testing - Used for discovering particular gravity of hydraulic cement. Produced using Borosilicate glass. The flagon is 243mm in absolute stature, having a knob of 90m...

Shrinkage Bar Mould (One Gang) For Testing Lab for Cement Testing Lab

CT-0015

Shrinkage Bar Mold (One Gang) for Cement Testing - The shape is utilized for casting samples of cement and aggregate combinations for measuring the expansive alkali reactivity. Determination : The ...

Shrinkage Bar Mould (Two Gang) For Testing Lab for Cement Testing Lab

CT-0016

Shrinkage Bar Mold (Two Gang) for Cement Testing - The form is utilized for casting samples of concrete and for measuring the potential expansive alkali reactivity. Made of gentle steel and has pre...

Shrinkage Bar Mould (Three Gang) For Testing Lab for Cement Testing Lab

CT-0017

The mould is utilized for Cement Testing - casting samples of concrete for measuring the potential expansive alkali reactivity. The mould, with three compartments, is made of gentle steel and has p...

Shrinkage Bar Mould (Four Gang) For Testing Lab for Cement Testing Lab

CT-0018

Shrinkage Bar Mold (Four Gang) for Cement Testing - The form is utilized for casting samples of concrete for measuring the potential extensive alkali reactivity. Bar form as above however in firear...

Length Comparator For Testing Lab for Cement Testing Lab

CT-0019

Length Comparator for Cement Testing - It is used to measure the dying shrinkage of concrete autoclave expansion of Portland cement and potential expansive reactivity of cement aggregate combinatio...