Compression
Testing Machine for Concrete Testing - Range of Semi-Automatic concrete
compression machines provide users the ability to test and analyses
concrete samples in accordance with all major international standards.
The power pack incorporates a durable variable output pump, allowing
fine control for accurate load pacing, or maximum pump output for
daylight closure. The rapid approach pump provides a high rate of
daylight closure and is available as an optional extra for the motorized
power pack- only if fitted at the time of ordering. An onboard LED
screen allows the sample load / Stress to be monitored. The control
panel allows for data input and manual control if required. Testers are
manufactured in the range of 300 kN - 5000 kN capacities. The standard
models are of 1150 kN, 2000 kN, and 3000 kN capacity. Suitable for
testing 50mm, 100mm, 150mm and 200mm cube samples as well as cylinder
samples with 75 160mm diameter and 150-320mm height. Pressure safety
valve, piston limit switch, removable front and rear gates are standard
on all models. Upper compression platens have ball seating assembly for
movement in all models. All compression platens have a surface hardness
of 55 HRC. Required distance pieces of 100mm, 50mm, and 20mm for
vertical test distance are supplied as standard in all models. Pressure
transducer with a sensitivity of %0.3 is used for load measurements. All
models operate with 220-240 VAC, 50 60 Hz, 1 phase mains power.
Login
Register
+91 9817319615
