Moving Thin Film Oven for Bitumen Testing - The Rolling Thin Film Oven Test is utilized to acquire homogeneously matured material by the utilization of warmth and air to mimic these effects in traditional blending.The oven is of double wall construction with side vents and of the heated convection type of air Circulation. An electronic controller keeps up the temperature at 163+ 0.5? C. A vertical, carriage is provided to help 8 glass test compartments, which are pivoted at 15+ 0.2rpm. An outlet opening 1mm in measurement is associated with a 7.6m length of copper tubing and stream meter which controls the wind current at 4000 ml/min. Air is blown into the example compartments at their most minimal purpose of go by an interior airjet. The broiler is provided with 8 glass test compartments and a thermometer (IP 47C/ASTM 13C). Inner measurements 483 x 450 x 381mm. A different wellspring of packed air is required to work this stove. - Operating Voltage 230 V A.C., Single Phase - Certified temperature control - Digital Display - Internal Fan ACCESSORIES : - Compressor Spares - Glass test compartment Thermometer.