Vicat Softening Point Apparatus High Temperature - Vicat softening temperature of plastics is the temperature at which a standard level finished indentor infiltrates 1 mm into the surface of the material under test under a predefined stack. The test is directed by putting a test example taken from the example under test on a level stage inside a fluid shower and applying pressure stack over its upper face through a level finished indentor. The heap is connected by setting dead weights on the upper end of the indentor. After the test example accomplishes the temperature of the shower, the shower temperature is expanded steadily till the indentor infiltrates by precisely 1 mm into the test example. The shower temperature in degrees centigrade at which this happens is accounted for as the Vicat Softening Temperature of the example under test. and The& Vicat Softening Temperature Apparatus for plastics comprises of a pivoted metallic edge which fills in as help for the test example. The edge is fitted with a shrub for managing a pole with a solidified indenting tip at its lower end and a stacking stage close to its best to put the weights on. A dial check is fitted at the upper end of the edge to quantify the development of the bar. The parts that are submerged in the shower amid the test are produced using metal. The indentor is produced using rapid steel. common lab types of gear producers and. Plastic Films Testing Lab gear manufacturers,exporters and Plastic Films Testing Lab providers
Login
Register
+91 9817319615
