Vapor-Liquid Equilibrium Set-up The fundamental information of any refining issue are the harmony between the fluid and vapor periods of the framework subjected to refining. Consequently is of extraordinary significance to examine the vapor-fluid balance. The set-up comprises of refining still with a warming component. An electrical Dimmerstat is associated with warming component for differing heat input. The vapors frame the highest point of section are dense in the shell and tube write condenser by circling cooling water. The condensate is gathered in reflux drum and input to section as reflux. A tank with pump is given to course frosty water to condenser. Stream rates can be directed through control valve fitted. Instrumentation is given to gauge the temperatures at various focuses. EXPERIMENTATION: ØØ To decide the vapor Liquid Equilibrium bend for CCl4 and Toluene or some other blend. UTILITIES REQUIRED : ØØ Water Supply. ØØ Drain. ØØ Electricity Supply : 1 Phase, 220 V AC, 1.5 kW. ØØ Refractrometer for Analysis. ØØ Required Chemicals. Specialized DETAILS : qq Distillation still : 1 Ltrs. Limit, made of Stainless Steel. nsulated by fired fleece. qq Condenser : Concentric Tube write. qq Heater : Nichrome wire qq Cooling Water Tank : Material Stainless Steel , Capacity 15 Ltrs. Approx. qq Cold Water dissemination : Using FHP Pump. qq Temperature Sensors : RTD PT-100 write qq Control board involving Digital Voltmeter : 0-300 Volt. Dimmerstat : 0-230 V, 2A. Computerized Temp. pointer : 0-199.90C RTD PT-100 Type with multi-channel switch With standard make on/off switch, Mains Indicator and so on qq Instruction Manual : An ENGLISH direction manual will be furnished alongside the Apparatus qq The entire set-up is mounted on a powder covered base plate .
Login
Register
+91 9817319615
