OPTICS PHYSICS LAB Lab Equipment Manufacturer, Supplier and Exporter in India

Exp-1 To decide the wavelength of sodium light. 

Exp-2 To decide the refractive index of a fluid by utilizing Newton's rings apparatus

Exp-3 To discover radius of curvature of planoconvex lens using Newton’s rings experiment, given ?=5893A°.

Exp-4 To discover the thickness of a thin sheet of paper (air wedge test)..

It includes a wooden base board 1110 x 115 mm (L x W) with a one meter scale partitioned in mms and figured at cms, is settled along the front edge. Provided with following adornments mounted on 

100 x 50mm bases. 

(a) 2 Nos Object and receiving screens 

(b) 1 No Plane mirror 150 x 100 mm mounted on a base. 

(c) 4 Nos Lens holder with V grooves 

(d) 1 No Needle mounted vertically in a short wooden bar 

(e) 1 No Candle Holder 

Optical centre height of all parts is 100 mm.

500 mm diameter, steel disc is faced with matt white, marked every 5, with extended lines every 10 & 30; cross lines mark the centre. The disc is mounted on a 25 mm diameter steel tube 390 mm long which fits into a stable base with levelling feet. The disc rotates about its centre & can be locked in any desired position. The lamp house holds a 12V, 24W axial filament lamp. This lamp house is covered by a rotatable outer shield that has various slots. By rotating the shield, light beams of varying width as well as narrow single, double & triple beams can be provided. Attached to the lamp house is an adjustable lens carrier with lens to provide diverging, parallel or converging light beams. The lamp house is mounted on a rotatable arm that can be locked in any position. A sliding weight on the arm acts as a counterpoise. All optical elements are supplied with magnets attached so that they can be attached at any place on the disc. The disc is supplied complete with accessories.....

Clear acrylic, all appearances completely cleaned. Available in different sizes  , (a) 75 x 50 x 18 mm (b) 100 x 65 x 18 mm (c) 115 x 65 x 20 mm (d) 100 x 45 x 25 mm

Greece spot plate held between two wooden screens with 45 mm dia gap, mounted with 2 slanted plane mirrors approx. 90 mm square..

It includes two pieces of polythene which are  25mm square and 10mm thick,separated by a tin foil, mounted on stand behind aperture of 12mm diameter.

It is used in investigating the action of a lens.

This kit  is utilized to demonstrate the standards of a pinhole camera. Utilize cardboard boxes with light sources, lens, and paper to exhibit a pinhole camera. Contains (8) Cardboard boxes 150 x 100 x 100 mm with small opening, screen and lid, filament lamp, 50 sheets of dark paper 200 x 250 mm, one 60 watts light, one mounted light holder with flex, one packet of pins.

This apparatus is a very helpful apparatus to understand the idea of polarization. With the assistance of polarimeter, polarization can be examined and also investigated. For better exactness in assurance of particular turn, polarimeter is utilized which involves comparing the brightness of two halves in the field of view. The device depends on Biot's Law.