Quick answer. These four are industrial maintenance and safety training rigs, not classroom apparatus, so the decision is whether each rig trains the competences your course has to certify. Two of them teach a procedure: lock-out tag-out (MLT-0003) is worth buying only if it drills the whole sequence through to verifying the zero-energy state, and the flange and gasket rig (MLT-0004) only if students can pressure test the joint they made. The other two, MLT-0001 and MLT-0002, name no equipment at all, so their written task list is the entire specification. Ask for task lists and itemised hardware before comparing anything else.
Four items are listed here: MLT-0001 Standardised Engineering Lab Mechanical Trainer, MLT-0002 Engineering Lab Maintenance Trainer, MLT-0003 Engineering Lab Lock-Out Tag-Out Training Systems and MLT-0004 Flange and Gasket. These are not classroom demonstration apparatus. They are industrial maintenance and safety training rigs, the kind bought by a maintenance trade course or a company training department, and two of them teach a procedure rather than a principle. Two of the four also name no equipment at all, so for those the task list is the entire specification and you should ask for it before comparing anything.
| Code | Item | What it trains |
|---|---|---|
| MLT-0003 | Lock-out tag-out training system | Isolating energy sources before maintenance so plant cannot be started while someone is working on it |
| MLT-0004 | Flange and gasket | Making and proving a bolted, gasketed joint |
| MLT-0002 | Maintenance trainer | Not stated: ask for the task list |
| MLT-0001 | Standardised mechanical trainer | Not stated: ask for the task list, and ask what it is standardised to |
Lock-out tag-out is the procedure that makes maintenance survivable: the energy sources feeding a machine are shut down and physically isolated, each isolation point is locked by the person who will be working, a tag records who and why, stored energy is released, and the zero-energy state is then verified before anyone puts a hand inside. A training system is worth buying only if it drills the whole of that sequence, so ask what the supplied material covers against this list:
Then establish what hardware comes with it. Ask which isolation devices are supplied, for example circuit breaker lock-offs in the sizes you use, plug and cable lock-outs, valve lock-outs for gate, ball and butterfly valves, padlocks, hasps, a lock box, and tags. Ask whether those devices fit the isolation hardware your own plant or workshop actually uses, because a kit that does not fit your breakers and valves teaches the wrong habits. Ask whether tags and permit forms are included and in which language, whether there is a demonstration rig with simulated energy sources or only the devices, and whether an assessment of competence is part of the package. Finally, ask whether the training content is written against the regulation that applies in your jurisdiction, and verify that yourself rather than relying on a catalogue statement.
The lesson of a flange training rig is that a gasketed joint seals because the gasket is compressed evenly to the right stress, and that this depends on bolt load rather than on how hard the fitter pulls. The practical points it should teach are the tightening pattern, working diagonally across the joint in several passes rather than round it once; that torque is only a proxy for bolt load and that friction in the thread and under the nut scatters the relationship badly, which is why lubrication condition matters; that over-tightening crushes a gasket and causes a leak just as surely as under-tightening; and how to re-check a joint after it has been pressurised and after it has been through a thermal cycle.
Ask what is physically supplied: which flange sizes, pressure classes and face types, the surface finish of the faces, which gasket materials, whether a calibrated torque wrench is included, whether any means of measuring actual bolt load is provided such as load-indicating washers or a tensioner, and whether the joint can be pressure tested so the student finds out whether the joint they made seals.
Two things to settle in writing. Gasket material: ask exactly what the supplied gaskets are made of and ask for written confirmation that no asbestos-containing material is supplied, since asbestos gaskets were once common in this application and are prohibited or restricted in many countries. Pressure testing: if the rig is to be pressurised, ask what medium and what pressure, ask for a relief device, and prefer a liquid test to a compressed gas one, because gas stores far more energy at the same pressure and a joint that lets go releases it all at once.
Neither name says what the rig contains. Ask for a written task list and check it against the skills your course certifies. A maintenance training rig of this kind would usually cover some combination of: bearing fitting and removal with the correct pullers and a heater rather than a hammer; shaft and coupling alignment, with the measuring method stated; belt and chain drive tensioning; mechanical seal and packing replacement on a pump; lubrication practice; fastener and thread repair; and the beginnings of condition monitoring. Ask which of those are included, whether faults can be inserted for diagnosis practice, whether the hand tools and measuring instruments are supplied or assumed, and what consumables each trainee uses up, because on rigs like these the consumables are the running cost. For MLT-0001, ask what the word standardised refers to.
Ask also about the rig itself: its weight and footprint, whether it is on castors, whether rotating parts are guarded and an emergency stop is fitted, and the supply it needs, since several of these tasks involve a motor.
The instructor manual and the trainee workbook, and in which language; the number of trainees the rig serves at once, which for procedure training is usually a small group; spares and consumables with prices; the supply voltage, frequency and plug type for your country; installation and any instructor familiarisation included; and the warranty. For any claim that training content meets a particular regulation or standard, contact us for the latest supporting documents and check them against the regulation itself before you rely on it.
Fluid and thermal apparatus is under Mechanical Engineering Trainers and Other Engineering Lab Trainers. Electrical isolation, which is the first energy source any lock-out procedure deals with, is covered at equipment level under Electrical Engineering Trainers, and trade-level appliance and wiring work under Vocational College Trainers. Sensors and condition measurement are under Instrumentation Trainers. Parent range: Electronics Lab Trainer Kits.
Send the competences your course has to certify and ask for a quote that lists, against each code, the hardware supplied and the tasks it trains. For example Lock-Out Tag-Out Training System (MLT-0003), two sets, with the isolation devices itemised and confirmed to fit the breakers and valves in use at your site. Contact Ray Export for prices, manuals and lead times.
The whole sequence: energy sources shut down and physically isolated, each isolation point locked by the person who will work, a tag recording who and why, stored energy released, and the zero-energy state verified before anyone reaches inside. Check it covers every energy source, not only electrical: springs, capacitors, hydraulic and pneumatic accumulators, raised loads, residual heat and process chemicals. Ask how it teaches verification and with what test means, since that step is most often skipped. It should also cover one lock, one key, one person; group isolation; shift handover; and lock removal rules.
Ask which isolation devices are supplied: circuit breaker lock-offs in the sizes you use, plug and cable lock-outs, valve lock-outs for gate, ball and butterfly valves, padlocks keyed to differ in enough number for a class, hasps, a group lock box and tags. Confirm they fit the breakers and valves your own plant actually uses, because a kit that does not fit teaches the wrong habits. Ask whether tags and permit forms are included and in which language, whether there is a demonstration rig with simulated energy sources or only the devices, and whether a competence assessment is included.
That a gasketed joint seals because the gasket is compressed evenly to the right stress, which depends on bolt load rather than how hard the fitter pulls. It should teach the tightening pattern, diagonally across the joint in several passes; that torque is only a proxy for bolt load, scattered by thread and nut friction, so lubrication condition matters; that over-tightening crushes a gasket as surely as under-tightening leaks; and how to re-check a joint after pressurising and a thermal cycle. Ask whether students can pressure test the joint they made.
First, what is physically supplied: flange sizes, pressure classes and face types, face surface finish, gasket materials, whether a calibrated torque wrench is included, and whether bolt load can be measured, for example with load-indicating washers or a tensioner. Second, ask exactly what the gaskets are made of and for written confirmation that no asbestos-containing material is supplied, since asbestos gaskets were once common and are prohibited or restricted in many countries. Third, if the rig is pressurised, ask the medium, pressure and relief device, and prefer a liquid test, because compressed gas stores far more energy.
Neither name says, so ask for a written task list and check it against the skills your course certifies. A maintenance rig of this kind usually covers some combination of bearing fitting and removal with pullers and a heater, shaft and coupling alignment with a stated measuring method, belt and chain tensioning, mechanical seal and packing replacement on a pump, lubrication, fastener and thread repair, and early condition monitoring. Ask whether faults can be inserted for diagnosis, whether tools and instruments are supplied or assumed, what consumables each trainee uses, and what standardised means in MLT-0001.
Their weight and footprint, whether they are on castors, whether rotating parts are guarded and an emergency stop is fitted, and the supply they need, since several maintenance tasks involve a motor. Ask how many trainees a rig serves at once, which for procedure training is usually a small group, and whether the instructor manual and trainee workbook are supplied and in which language. Ask too about installation and instructor familiarisation. If training content is said to follow a particular regulation, verify it against that regulation yourself rather than relying on a catalogue statement.
Ray Export is a manufacturer and exporter of laboratory, scientific and educational equipment based at Plot No. 449, HSIIDC Industrial Area, Saha, Ambala, Haryana 133104, India. Enquiries: [email protected], +91-9817319615.
Written by Palak Mall, Senior Content Writer. Technically reviewed by Arvind Kumar, Lab Equipment Specialist, 12+ years in laboratory and testing instrumentation. Last updated: 17 October 2026.
Specifications for MLT-0001 to MLT-0004, including the task lists, isolation devices, flange sizes and classes, gasket materials and test pressure, are confirmed in writing on the quotation. For certificates, contact us for the latest copies of the relevant certificates. No price is quoted on this page. Listing notes: MLT-0001 and MLT-0002 name no equipment; the word standardised in MLT-0001 is unexplained; MLT-0004 is titled Flange and Gasket, a component name rather than a trainer name; and these mechanical maintenance rigs sit under an electronics trainer parent range.
This mechanical coach unit gives upkeep and tasks alongwith hands-on introduction to various basic mechanical motivations behind modern processes.Personnel aptitudes can likewise be enhanced utilizing this Trainer.Vertical and different flat shaft alignment,gear drives,belt drives& and chain drives,pump support and bolt/tag-out should be possible to fullfill different puposes. A strong metal table is utilized to fit all parts with locking casters and all powder covered non-reaching surfaces with a high-toughness process. General measurements of the unit fluctuates with the necessity (LXBXH)
The Maintenance Unit gave by us is intended to give hands-on down to earth preparing to various normal process exercises. Preparing modules related with this unit incorporate finish pump maintenance, alignment and coupling presentation , electric engine and related control frameworks including lock-out and tag-out exercises.
Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering educational equipment, engineering equipments exporters, engineering equipments suppliers, engineering equipments supplier, engineering educational equipments, engineering equipments manufacturers in Ambala, India.
Ray Export give Lock Out Tag Out hardware for mechanical designing lab preparing systems.For evaluate and security purposes these tagouts are required in relatively every machine whether electrical or mechanical. The bolt Outs keeps the arrival of perilous vitality to secure representatives performing overhauling and support exercises.
We ,in Ray Export organization deal with giving our clients high quality, highly refreshing Gaskets which can be redone according to the client's Specifications .These Flange and tangle gaskets are utilized for modern purposes, for example, treatment of crude products.These are very requested among our customers due to their withstand to high temperature and warmth. Additionally, we guarantee the quickest administrations of our items to clients. FLange and Gasket required in Engineering lab can be given by us on ask.
Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering educational equipments india, engineering equipments distributors, engineering lab instruments, engineering equipments manufacturer, thermodynamics engineering equipment, engineering educational lab equipments in Ambala, India.