science lab equipment manufacturer

Bread Board Trainers

Bread Board Trainers Lab Equipment Manufacturer, Supplier and Exporter in India

Ray Export is a leading manufacturer and supplier of Bread Board Trainers in India,

Bread Board Trainers for Electronics Labs

Quick answer. First, a correction worth making before anything else: this category is named for breadboard trainers but currently lists one record, BBT-0001, which is a digital lab trainer - a different instrument. We have flagged it for correction, and in the meantime we can quote breadboard trainers on enquiry. Second, the guidance, because it is short and it matters: the breadboard is the wearing part and the power supply is the reason to buy a trainer at all. Specify the contact material and tie-point count, insist on current limiting on every supply rail, and check that the breadboard can be replaced without returning the unit. A trainer with a cheap breadboard teaches students that electronics is unreliable, which is the opposite of what it was bought for.

What a breadboard trainer is, and why it is not the same as its neighbours

Three products are routinely confused, and the confusion is why this category's contents and its name do not match. They are bought for different courses.

InstrumentWhat it isWhat it teaches
Breadboard trainerA solderless breadboard with supplies, a signal source and usually some meters and logic aids built into one caseCircuit building. The student decides the topology, chooses the components and makes every connection - so the circuit is theirs, including its faults.
Digital lab trainerA fixed set of logic gates, flip-flops, displays, switches and a clock, wired to patch socketsLogic and sequential behaviour. The building blocks are given and cannot be misconnected internally, so the exercise is about the logic rather than the wiring.
Development boardA microcontroller with its supporting circuit, programmed from a computerProgramming and embedded interfacing. See electronics training boards.

The practical consequence: a breadboard trainer is the right purchase for an analogue or general circuits course where students must build from a diagram; a digital lab trainer is the right purchase for a logic design course. Buying one for the other's syllabus produces a room full of equipment that gets used for a fraction of what it can do.

The breadboard is the wearing part

This is the specification that is never quoted and that determines whether a trainer is still worth using in its third year.

  • Contact material. Good breadboards use phosphor bronze or nickel-plated spring contacts that keep their grip after thousands of insertions. Cheap ones use plain steel strip that takes a set, loses tension and then makes contact sometimes. An intermittent breadboard is worse than a broken one, because the student gets a circuit that works, then does not, then does - and concludes that electronics is unreliable or that they are incompetent. Ask for the contact material explicitly.
  • Tie-point count and layout. Ask for the number of tie points and whether the distribution strips are split or continuous, because a split rail halfway along a long board catches students who assume it runs end to end. For op-amp and transistor work, confirm the board is wide enough to straddle a DIP package with room each side.
  • Replaceability. Ask whether the breadboard can be unclipped and replaced without returning the unit, and ask for spares with the order. This single question decides whether a worn trainer is a fifteen-minute repair or a write-off, and the answer costs nothing to obtain before purchase.
  • Jumper provision. Ask what wire or jumper set is included. A trainer supplied without jumpers is not usable on day one, and a class improvising with stripped single-core wire damages the contacts.

The power supply is the reason to buy a trainer

A bare breadboard costs very little. What you are paying for in a trainer is a supply, a signal source and some instrumentation in one earthed case - so those are what to specify.

  • Current limiting on every rail, and this is the most valuable feature on the unit. Students short things. With current limiting, a short is a lesson: the voltage collapses, the limit light comes on, the student finds the fault and nothing is damaged. Without it, the same mistake destroys a component and sometimes the supply. Ask for the limit value and whether it is adjustable and indicated.
  • The rails an electronics course actually needs: a fixed 5 V for logic, and a dual variable supply for analogue work so that op-amps can be run from a split rail. Confirm the voltage ranges, the current per rail, and whether the two variable outputs can be tracked.
  • Signal source. If a function generator is built in, ask the frequency range, the waveforms, the amplitude range and whether there is a DC offset control - offset is what lets a student bias a single-supply amplifier correctly, and its absence quietly blocks a whole class of experiments.
  • On-board meters: useful, but do not overpay. Built-in voltmeters and ammeters are convenient for quick checks and are usually of modest resolution. Any course that teaches measurement properly will use a separate digital multimeter and an oscilloscope anyway, so treat on-board meters as a convenience rather than as instrumentation, and spend the difference on a decent DMM per bench.
  • Logic aids for mixed work: a logic probe, a pulser, a clock with selectable frequency, BCD or seven-segment displays and a bank of DIP switches. These make a breadboard trainer usable for simple digital exercises without a separate digital trainer.
  • Earthing and protection. The unit contains a mains transformer, so ask about the earth arrangement, the fuse rating and position, and whether outputs are isolated from the mains. In a teaching laboratory this is a question for your safety officer as much as for a supplier.

What a quotation must state

  • Breadboard: tie-point count, contact material, strip layout, whether it is replaceable, and spares.
  • Supplies: every rail with its voltage range and current, whether variable outputs track, and the current-limit value, its adjustability and its indication.
  • Function generator: frequency range, waveforms, amplitude range, DC offset control - or a clear statement that none is fitted.
  • Instrumentation fitted, with resolution, and the logic aids provided.
  • Jumpers and leads included, and the component kit if one is offered.
  • Mains supply voltage, fuse rating, earthing arrangement and output isolation.
  • Case dimensions and bench footprint, and whether the unit is bench-standing or rack-mounting.
  • Documentation: circuit diagram of the supply and generator sections, and a set of worked experiments.

About this listing - the correction we owe you

This category holds one record, BBT-0001, named "Digital Lab Trainer". As the table above sets out, a digital lab trainer is not a breadboard trainer: it offers fixed logic blocks on patch sockets rather than a solderless board for building arbitrary circuits. So either the record is filed in the wrong category or the category is misnamed, and either way a buyer searching for a breadboard trainer finds something else while a buyer searching for a digital lab trainer never thinks to look here.

The record also carries the suffix "For Vocational Training And Didactic Labs", six words appended identically to every record in this branch, which pushes the useful part of the name out of a search result or a quotation line.

So tell us what you need rather than ordering from this page. If you want breadboard trainers, we will quote against the specification above - contact material, tie-point count, rails and current limits, generator and logic aids - and confirm it in writing. If what you actually want is the digital trainer currently listed here, say so and we will quote that; it also sits properly alongside digital and analog trainer kits and digital electronics lab trainers. We have recommended internally that this record be moved to a digital-trainer category and that this one either be stocked with genuine breadboard trainers or removed.

Related ranges

Within training boards: electronics training boards for microcontroller development boards and electronic training boards. For complete trainers see basic electronics trainers and digital and analog trainer kits; for the parts students will plug into a breadboard, electronic components. The full electronics lab category lists the rest.

Frequently asked questions

What is the difference between a breadboard trainer and a digital lab trainer?

A breadboard trainer gives a solderless board plus supplies and a signal source, so the student chooses the topology and makes every connection - the circuit is theirs, faults included. A digital lab trainer gives fixed logic gates, flip-flops, displays and a clock on patch sockets, so the building blocks cannot be misconnected internally and the exercise is about the logic rather than the wiring. Buy the first for analogue and general circuits courses, the second for logic design.

Why does breadboard contact material matter so much?

Because it decides whether connections stay reliable after a few thousand insertions. Phosphor bronze or nickel-plated spring contacts keep their grip; plain steel strip takes a set, loses tension and then makes contact intermittently. An intermittent board is worse than a dead one: the student gets a circuit that works, then does not, and concludes that electronics is unreliable or that they are incompetent. Ask for the contact material before comparing prices.

What is the single most useful feature on a breadboard trainer?

Current limiting on the supply rails. Students short things, and with current limiting a short becomes a lesson - the voltage collapses, the indicator lights, the fault gets found and nothing is damaged. Without it the same mistake destroys components and sometimes the supply. Ask for the limit value, whether it is adjustable, and whether it is indicated on the panel.

Are the built-in meters worth paying for?

They are a convenience rather than instrumentation. On-board voltmeters and ammeters are handy for a quick check and are typically of modest resolution, and any course that teaches measurement properly will put a separate digital multimeter and an oscilloscope on the bench regardless. So do not pay a premium for meters you will bypass - spend it on a good DMM per bench instead.

Can a worn breadboard be replaced?

On a well-designed trainer, yes - the board unclips and a new one goes in, which turns an ageing unit into a fifteen-minute repair. On others the board is fixed and a worn unit is effectively finished. This is a question that costs nothing to ask before purchase and a great deal to discover afterwards, so put it on the enquiry along with a request for spare boards and jumper sets.

Why does this category list a digital lab trainer?

Because the single record filed here, BBT-0001, is a digital lab trainer rather than a breadboard trainer - the category and its contents do not match. We have said so plainly rather than let you discover it, and have recommended that the record be moved and this category either stocked correctly or removed. In the meantime, tell us which of the two instruments you want and we will quote it with the specification confirmed in writing.

Key takeaways

  • Check which instrument you are buying. A breadboard trainer, a digital lab trainer and a development board teach three different things, and this category currently lists the second under the first's name.
  • The breadboard is the wearing part. Ask for contact material, tie-point count, replaceability and spares.
  • An intermittent breadboard teaches the wrong lesson - that circuits are unreliable. It is a pedagogical fault, not just a quality one.
  • Current limiting is the most valuable feature on the unit. It turns a short circuit from a destroyed component into a diagnosis exercise.
  • Specify the rails your course needs: fixed 5 V for logic and a dual variable supply for op-amp work, with the ranges and currents stated.
  • Treat on-board meters as a convenience, and put the saving into a proper multimeter per bench.

About this page

Ray Export is a manufacturer and exporter of laboratory, scientific and educational equipment based at Plot No. 449, HSIIDC Industrial Area, Saha, Ambala, Haryana 133104, India. Enquiries: [email protected], +91-9817319615.

Written by Palak Mall, Senior Content Writer. Technically reviewed by Arvind Kumar, Lab Equipment Specialist, 12+ years in laboratory and testing instrumentation. Last updated: 17 October 2026.

This page gives specification guidance and quotes no prices; prices depend on model, supply configuration, accessories and destination, and are issued only as dated written quotations. Breadboard tie-point counts and contact materials, supply ranges and current limits, generator specifications, fitted instrumentation, jumper and component provision, fuse ratings, earthing and isolation arrangements and footprints will be confirmed in writing on the quotation before order; mains supply and earthing arrangements must also be approved by your own institution. Statements about contact materials and wear are general engineering practice rather than claims about any particular product. The record count and the category-name mismatch described above were read from this listing on 16 October 2026 and will change as it is corrected.

Digital Lab Trainer For Vocational Training And Didactic Labs

BBT-0001

Digital Lab Trainer Equipment for Education, Engineering and Vocational Training - The DIGITAL LAB is intended for elementary as well as advance training of digital electronics. The digital lab covers regular digital circuits by solder-less interconnections on breadboard and as well as compatible with all optional modules through use of 2mm brass terminals and patch cords. Various clock generators, logic level input/output indicators and DC regulated power supplies etc. are in-built. The unit housed in attractive enclosure is supplied with mains cord, patch cords, Instruction manual and Component Set. Experimental Coverage: Logic gates operation To verify De-morgan’s theorem with boolean logic equations Binary to Gray code conversion Gray code to Binary conversion Binary to Excess-3 code conversion Binary Adder and Subtractor Binary Multiplier EX-OR gate implementation Application of EX-OR gate Johnson Counter To verify the dual nature of Logic Gates Study of Flip-Flops RS, JK, D&T Multiplexer and Demultiplexer 4 Bit Binary up and down counter Study of 8 to 3 Line Encoder Study of 3 to 8 Line Decoder Study of Shift Register (SIPO) CMOS-TTL Interfacing Study of Crystal oscillator Study of pulse stretcher circuit Features: Bread Board : Unique solder-less large size, spring loaded breadboard consisting of two Terminal Strips with 1280 tie points and 4 Distribution Strips with 100 tie points each, totaling to 1680 tie points. (Size : 112mm x 170mm approx) Regulated DC Power Supply : +5V at 1 Amp, -5V at 500 mA, 3 to +15V at 500mA, and -3 to -15V at 500 mA. Pulse Generator : 1 Hz to 1 MHz in 6 Steps. Variable in between steps - Amplitude : 3-15V (CMOS), 5V (TTL) - Duty Cycle : 50% TTL / CMOS Output Pulsar Switches : 2 independent buffered bounce free manual pulser (useful for freezing the action of each stage of the counter after every clock pulse) Data Switches : 12 Nos. independent buffered logic level inputs to select High / Low TTL levels, each with a bi-color LED to indicate high / low status and termination. Logic Indicators : 12 Nos. independent buffered logic level indicators for High / Low status indication with bi-color LED for digital outputs Seven Segment Display : 2 Nos. BCD to Seven Segment Decoder / Driver IC with terminals Logic Probe : Logic level indicator for TTL / CMOS CMOS/TTL : Provided Power : 230 V ± 10%, 50 Hz Components Provided : ICs-4001/1, 4049/1,4069/1, 7400/1, 7402/1, 7404/1, 7406/1, 7408/2, 7410/2, 7411/3, 7420/2,7432/3, 7474/2,7476/2,7486/1.Resistors-330E/1,1K/2, 1K8/1,,15K/1, 47K/1.1M/2, Capacitors- 0.01mF/1, 0.1mF/1, 0.22 mF/1,Crystal-32.768MHz/1. Accessories : Mains cord, Operating and Experimental manual, Red & Black patch cords (2mm with Pin) 10 each, Red & Black patch cord (Pin to Pin) 10 each. Wire 24/25 SWG. 1Meter each 5 Colour Instruction manual : Strongly supported by detailed operating instructions. OPTIONAL MODULES: Apart from above given experimental coverage of 20 experiments on breadboard, customers can purchase these optional modules. These are ready to use modules with wired components & circuit schematic drawn on top compatible to use with Digital Lab. Logic gates operation To verify De-morgan’s theorem with boolean logic equations Binary to Gray code conversion Gray code to Binary conversion Binary to Excess-3 code conversion Binary Adder and Subtractor Binary Multiplier EX-OR gate implementation Application of EX-OR gate Johnson Counter To verify the dual nature of Logic Gates Study of Flip-Flops RS, JK, D&T Multiplexer and Demultiplexer Bit Binary up and down counter Study of 8 to 3 Line Encoder Study of 3 to 8 Line Decoder Study of Shift Register (SIPO) CMOS-TTLInterfacing Study of Crystal oscillator Study of pulse stretcher circuit 4 Bit Ring Counter 38522 Modulo 12 Counter By Direct Clearing Decade counter Shift Register SISO and PIPO Decimal to BCD Converter Astable Multivibrator using Digital IC Bistable Multivibrator using Digital IC Monostable Multivibrator using Digital IC Octal to binary Encoder 4 Bit Magnitude Comparator Interface of TTL-IC to CMOS-IC & CMOS IC to TTL-IC. 

Supply of Bread Board Trainers from India to Finland, France, Tanzania, Thailand, Sri Lanka, Congo, Costa Rica, Ivory Coast, Croatia, Cuba, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, United Arab Emirates (UAE, Dubai), United Kingdom (London), United States, Uruguay, Uzbekistan, Vanuatu, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma Myanmar, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia (Addis Ababa), Fiji, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Central African Republic, Chad, Chile, Colombia. Math Teaching Kit suppliers in Luxembourg, Macedonia, Madagascar, Malawi (Lilongwe), Malaysia (Kuala Lumpur), Maldives, Mali, Malta, Marshall Islands, Mauritania, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Comoros, Congo. Math Teaching Kit manufacturers in Dominican Republic, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hungary, Iceland, Indonesia, Iran, Iraq, Niger, Nigeria (Abuja), Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines (Manila), Poland, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya (Nairobi), Kiribati, Korea, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Mauritius, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Portugal, Qatar, Romania, Russia, Rwanda (Kigali). Math Teaching Kit exportets to Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Sudan, Spain, Sudan, Suriname, Swaziland, Sweden, Switzerland, Syria, Tajikistan, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda (Kampala), Ukraine, Venezuela, Vietnam, Yemen , Zambia (Lusaka), Zimbabwe
'); popupWin.document.close(); }