science lab equipment manufacturer

Coated Fabric Testing Equipment

Coated Fabric Testing Equipment Lab Equipment Manufacturer, Supplier and Exporter in India

Ray Export is a leading manufacturer and supplier of Coated Fabric Testing Equipment in India,

Quick answer. Start from what the result is for - batch release, product development or a tender - because that decides which of the four instruments, CFTE-0001 to CFTE-0004, you actually need. The exposure rack gives natural weathering data in your own climate, but the answer takes months or years, so it suits product claims and long-term development, not approving a batch next week. Batch release and supplier comparison call for an accelerated weathering tester, which is a different purchase and not in this listing. The pressure head, tensile and Schildknecht flex testers then answer water penetration, strength and cold cracking.

What this range covers

Four instruments, coded CFTE-0001 to CFTE-0004: an exposure rack for natural weathering, a pressure head tester for resistance to water penetration, a tensile strength tester, and a Schildknecht flex tester for flexing resistance. Coated fabrics - tarpaulin, awning, tent and truck-cover material, coated upholstery, vinyl-coated and rubber-proofed cloth - fail differently from plain textiles, which is why they have their own tests: the coating cracks, delaminates, hardens in cold or lets water through long before the base cloth gives up.

One practical note before you order: the coated-fabric instruments in this catalogue are split across two listings. An exposure rack, a coating adhesion tester for vinyl coated fabric and a De Mattia flex tester are filed under fabric testing equipment. If coated fabric is your subject, ask for both listings to be quoted together rather than choosing between them, and note that an exposure rack appears in each listing under the same name.

Real Time or Lab Time

The exposure rack is the item in this range most often bought without being understood, so it is worth being plain about what it does. A rack is natural weathering. Specimens are mounted outdoors at a specified angle and orientation and left there, and the answer arrives in months or years. That is the gold standard for durability data, because the specimen meets real sunlight, real rain, real temperature cycling and real dirt in your own climate - and it is also useless to anyone who has to approve a batch next week.

So the choice is between two different kinds of answer, and the right decision follows from what the result is for.

Natural exposure rackAccelerated weathering tester
Time to a resultMonths to yearsDays to weeks
What it tells youHow the material behaves in your actual climateRelative ranking of materials under a defined artificial exposure
CostLow purchase, long wait, needs outdoor space you controlHigher purchase, lamps and filters as consumables, mains power and water
Use it forProduct claims, long-term development, correlation dataBatch release, specification compliance, supplier comparison

They are not interchangeable, and an accelerated result should never be reported as though it were a natural one. Accelerated testers are a different purchase and are not in this listing; if your specifications call for xenon-arc or fluorescent-UV exposure, tell us and we will quote for it rather than letting the rack stand in for it. If you are buying the rack, settle these: the angle and orientation your standard specifies and whether the rack sets them; the mounting area and how many specimens it holds; the frame and fastener material, since the rack itself will weather; whether the site is secure and clear of shading; and who records the exposure - start date, cumulative time and, if the standard asks for it, the radiant energy received.

Water penetration: the pressure head tester

For a coated fabric, the number a customer usually wants is the hydrostatic head - the water pressure the material resists before water appears on the other side. Three things decide whether your figure matches theirs.

The rate of pressure rise. Standards specify it, and the result depends on it: raise the pressure faster and the material appears to resist more. Ask what rates the instrument offers, how the rate is controlled and whether it is displayed. The commonest source of a dispute between two laboratories testing the same fabric is a different rate of rise.

The clamp. Water finding its way out at the edge of the specimen, rather than through it, ends the test early and understates the material. Ask about the clamping arrangement, the test area, the gasket material and how a leak at the clamp is distinguished from a genuine failure. A spare set of gaskets is a consumable worth buying with the instrument.

The water. Ask what water the method requires and at what temperature, and whether the instrument controls temperature or you must. Distilled or deionised water is often specified, and hard water will scale the instrument over time.

Tensile testing of coated fabric, which is not quite ordinary tensile testing

CFTE-0003 is a tensile strength tester, and coated fabrics make two particular demands of one.

First, the grips. A coated surface is slippery and a coating can be damaged by a sharp jaw face, so specimens slip or fail at the grip rather than in the gauge length - and a break at the jaw is not a valid result. Ask what grip faces are supplied, whether rubber-faced or serrated options exist, and whether the machine takes the grip type your standard specifies. Ask also whether the method is strip or grab, because the two are not comparable and the specimen preparation differs.

Second, the load cell. A load cell much larger than the forces you are measuring gives poor resolution at the bottom of its range, so a machine sized for steel is the wrong machine for lightweight coated cloth. Ask for the load cell capacity and its accuracy expressed as a percentage of reading rather than of full scale, and choose a capacity that puts your typical breaking loads in the upper part of the range. If you also need to test heavy webbing or belting, ask about interchangeable load cells rather than buying one machine for everything. For metals and heavier materials, see universal testing machines and tensile testing machines.

Cold flexing: the Schildknecht tester

A coated fabric that is flexible at thirty degrees can crack at minus twenty, and a tarpaulin or a truck cover is folded and unfolded in exactly those conditions. The Schildknecht flex tester flexes specimens repeatedly so that cracking of the coating can be found, and the question that matters is temperature: the test is usually specified at a low temperature, and running it at room temperature answers a different question. Ask whether the instrument includes a cold chamber, what temperature range it reaches and holds, how temperature is measured at the specimen, and how specimens are examined for cracking afterwards and against what rating scale. If low-temperature testing is the point, confirm the chamber before the flexing mechanism, since the mechanism is the easy part.

What to ask for on the quotation

The standard and version each instrument is built to; test area and specimen size; for the pressure head tester, available rates of rise, clamp and gasket details and water requirement; for the tensile tester, load cell capacity, accuracy as a percentage of reading, grip types and whether strip or grab; for the flex tester, temperature range, chamber and how specimens are assessed; for the rack, angle, orientation, capacity and frame material; calibration certificate, traceability and recalibration interval for every instrument that reads a value; consumables with prices, which here means gaskets, grip faces, specimen dies and rack fasteners; services at the position; nominal voltage, frequency and plug pattern; and the warranty and local service position. For any certification stated here, contact us for the latest copies of the relevant certificates before you rely on it in a tender.

Related ranges: fabric testing equipment for the plain-textile tests and the three coated-fabric instruments filed there, leather testing equipment for finish adhesion, flexing and waterproofness on leather, rubber testing equipment for the elastomer tests, and plastic testing equipment for film and sheet. The full set is listed under raw products testing. For a quotation, tell us the destination country, the standards your customers name and what the results are for - batch release, product development or a tender - because that is what decides which of these four instruments you actually need.

Frequently asked questions

Can the exposure rack stand in for an accelerated weathering tester?

No, and an accelerated result should never be reported as though it were a natural one. A rack is natural weathering: specimens are mounted outdoors at a specified angle and orientation, and the answer arrives in months or years. That is the strongest durability evidence for your own climate and suits product claims, long-term development and correlation data. Batch release, specification compliance and supplier comparison need an accelerated tester, which gives a relative ranking in days to weeks. If your specification calls for xenon-arc or fluorescent-UV exposure, ask us to quote for that separately.

Why do two laboratories get different hydrostatic head results on the same fabric?

Usually because of one of three things. The rate of pressure rise: raise the pressure faster and the material appears to resist more, and a different rate of rise is the commonest source of dispute, so ask what rates the pressure head tester offers, how the rate is controlled and whether it is displayed. The clamp: water escaping at the edge rather than through the specimen ends the test early and understates the material, so ask about the clamping, test area and gaskets. The water: ask what water and temperature the method requires.

What grips does a tensile tester need for coated fabric?

A coated surface is slippery and a sharp jaw face can damage the coating, so specimens slip or fail at the grip rather than in the gauge length, and a break at the jaw is not a valid result. Ask what grip faces are supplied with CFTE-0003, whether rubber-faced or serrated options exist, and whether the machine takes the grip type your standard specifies. Ask too whether your method is strip or grab, because the two are not comparable and the specimen preparation differs between them.

How should the load cell on CFTE-0003 be sized?

To your fabric, not to the largest force you can imagine. A load cell much larger than the forces you are measuring gives poor resolution at the bottom of its range, so a machine sized for steel is the wrong machine for lightweight coated cloth. Ask for the load cell capacity and its accuracy expressed as a percentage of reading rather than of full scale, and choose a capacity that puts your typical breaking loads in the upper part of the range. If you also test heavy webbing or belting, ask about interchangeable load cells.

Does the Schildknecht flex tester need a cold chamber?

If low-temperature performance is what you need to show, yes. A coated fabric that is flexible in a warm room can crack in the cold, and tarpaulins and truck covers are folded and unfolded in exactly those conditions. The test is usually specified at a low temperature, and running it at room temperature answers a different question. Ask whether a cold chamber is included, what temperature range it reaches and holds, how temperature is measured at the specimen, and how cracking is assessed and against what rating scale.

Why are some coated-fabric testers listed under fabric testing equipment?

Because the catalogue splits them across two listings. An exposure rack, a coating adhesion tester for vinyl coated fabric and a De Mattia flex tester are filed under fabric testing equipment, and an exposure rack appears in each listing under the same name. If coated fabric is your subject, ask for both listings to be quoted together rather than choosing between them. When you ask, also state the destination country, the standards your customers name and what the results are for, since that decides which instruments you need.

Key takeaways

  • Decide by purpose: batch release, product development or a tender decides which of the four instruments you need.
  • Natural and accelerated weathering are not interchangeable: the rack answers in months or years, and an accelerated result is never reported as natural.
  • Rate of pressure rise drives the hydrostatic head figure and is the commonest cause of disagreement between laboratories.
  • Grips and load cell decide tensile results on slippery coated cloth; a break at the jaw is not a valid result.
  • Confirm the cold chamber first on the Schildknecht flex tester, because room-temperature flexing answers a different question.
  • Quote both listings together if coated fabric is your subject, since three related instruments sit under fabric testing equipment.

About this page

Ray Export is a manufacturer and exporter of laboratory, scientific and educational equipment based at Plot No. 449, HSIIDC Industrial Area, Saha, Ambala, Haryana 133104, India. Enquiries: [email protected], +91-9817319615.

Written by Palak Mall, Senior Content Writer. Technically reviewed by Arvind Kumar, Lab Equipment Specialist, 12+ years in laboratory and testing instrumentation. Last updated: 17 October 2026.

Specifications, including rates of rise, load cell capacity and accuracy, and chamber temperature range, are confirmed in writing on the quotation; for certificates, contact us for the latest copies of the relevant certificates. No price is quoted on this page. Listing notes: coated-fabric instruments are split between this listing and fabric testing equipment, and an exposure rack appears in both listings under the same name.

Exposure Rack

CFTE-0001

Introduction Rack is utilized for the shading speed against daylight of material textures. It is intended to test shading quickness of materials to sunshine. The test is completed by uncovering an arrangement of light quickness standard textures 1 to 8 and an arrangement of test examples to sunlight till the coveted blurring of the shading is acquired. The adjustment in shade of uncovered zone of the test examples and the light speed standard textures is then inspected and the relative level of shading quickness of test examples decided. The gear comprises of an edge made of wood with a glass encircled wooden cover pivoted over its best. The edge is fitted on a steel stand so it can be kept in open with the edge situated at an advantageous working stature and tilted at 45º to the level. The test example and light speed standard textures are mounted on a specials mounting card intended to give indicated covers to them. Ten such mounting cards intended to direct the test as per technique 1 of Indian Standard determination are given device. Additional cards are accessible as discretionary adornments.


Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering educational equipments india, engineering equipments distributors, engineering lab instruments, engineering equipments manufacturer, thermodynamics engineering equipment, engineering educational lab equipments in Ambala, India. 


Pressure Head Tester

CFTE-0002

Hydrostatic Head Tester made on an unbending stage, which comprises of a focal all around fitted with a coaxial ring cinch to affix the test piece over the well. The upper clip has the up and down development with the assistance of the screw/nut and handle instrument. The refined water is filled on the refined water glass physically and weight sensor is likewise connected to the upper clasping admirably. The weight, which is worked in the water well while testing is carefully show. The lower ring is settled to the base stage. There is an elastic ring joined to the ring for watertight of the example to the water. The well and ring are made of aluminum and tempered steel separately. There is a compacted air supply line which incorporate the weight controller, Burdon write weight measure, air channel, stream controller and a stream meter. The weight is controlled with the assistance of the weight controller and the rate of stream of air is controlled with the assistance of the stream controller. This is an advanced preset clock is additionally mounted on the board for the time estimation of the weight connected on the test example. Diverse models are accessible.

Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering educational equipments india, engineering equipments distributors, engineering lab instruments, engineering equipments manufacturer, thermodynamics engineering equipment, engineering educational lab equipments in Ambala, India. 


Tensile Strength Tester

CFTE-0003

Rigidity and extension are the two prime qualities of a large portion of the crude materials, regardless of whether they are metals: or non-metals, for example, froth, elastic, materials, plastic, paper: or completed items, for example, bars, wires, ropes, yarns, belts etcetera. These properties all the time assume the significant part in deciding the reasonableness of any crude material for a particular application. It is in this way, of most extreme significance to decide these attributes precisely, helpfully, and rapidly.

Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering educational equipments india, engineering equipments distributors, engineering lab instruments, engineering equipments manufacturer, thermodynamics engineering equipment, engineering educational lab equipmentsin Ambala, India. 


Schildknecht Flex Tester

CFTE-0004

Schildknecht flex analyzer comprising of a couple of tempered steel chambers with the goal that the pivot of each match are in a similar straight line. Holding with the assistance of the hose cut (gave the instrument) one end of the test example in a settled grasp and the opposite end in a responding hold gives the flexing and unflexing activity. The arrangement of grasp has two-settled hold and one huge responding grasp situated between them with a specific end goal to flex half of the test examples while the other half is being unflexed. The responding hold is slide on solidified and ground bars made of high carbon steel. The responding movement is given by a capricious and linkage system driven by an electric engine through V-belt and pulleys. A six digit electronic preset counter is accommodated demonstrating and control the quantity of the test cycles experienced.

Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering educational equipments india, engineering equipments distributors, engineering lab instruments, engineering equipments manufacturer, thermodynamics engineering equipment, engineering educational lab equipments in Ambala, India. 

Supply of Coated Fabric Testing Equipment from India to Finland, France, Tanzania, Thailand, Sri Lanka, Congo, Costa Rica, Ivory Coast, Croatia, Cuba, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, United Arab Emirates (UAE, Dubai), United Kingdom (London), United States, Uruguay, Uzbekistan, Vanuatu, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma Myanmar, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia (Addis Ababa), Fiji, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Central African Republic, Chad, Chile, Colombia. Math Teaching Kit suppliers in Luxembourg, Macedonia, Madagascar, Malawi (Lilongwe), Malaysia (Kuala Lumpur), Maldives, Mali, Malta, Marshall Islands, Mauritania, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Comoros, Congo. Math Teaching Kit manufacturers in Dominican Republic, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hungary, Iceland, Indonesia, Iran, Iraq, Niger, Nigeria (Abuja), Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines (Manila), Poland, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya (Nairobi), Kiribati, Korea, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Mauritius, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Portugal, Qatar, Romania, Russia, Rwanda (Kigali). Math Teaching Kit exportets to Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Sudan, Spain, Sudan, Suriname, Swaziland, Sweden, Switzerland, Syria, Tajikistan, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda (Kampala), Ukraine, Venezuela, Vietnam, Yemen , Zambia (Lusaka), Zimbabwe
'); popupWin.document.close(); }