Quick answer. Yarn testing answers three questions, and the order is not optional: how fine the yarn is (count), how much twist holds it together, and what load it breaks at. Count comes first, because a strength figure means nothing until you know the fineness it belongs to - the accepted figure of merit from a lea strength test is the count-strength product, the count multiplied by the lea breaking load, not the load on its own. Ray Export manufactures and exports thirteen instruments in this range, coded YTE-0001 to YTE-0013, covering twist, count, evenness, crimp and lea strength, together with a group of carpet testing instruments. Before any of them gives a usable number, the specimen has to be conditioned in a standard atmosphere, because yarn changes mass, strength and dimensions with the humidity of the room it is sitting in.
This is the sequence we recommend to every laboratory setting up a yarn testing bench, and it is also the order in which arguments with customers get settled.
Count first. Count is the measure of fineness, and every other yarn property is reported against it. A yarn that breaks at a given load is strong or weak only relative to how much material is in its cross-section. Two laboratories can run the same lea strength test on the same yarn, report honest numbers, and still disagree completely because one of them never established the count.
Twist second. Twist is what makes a bundle of fibres behave as a yarn at all, and it is the variable most often changed silently in production. Twist per unit length and twist direction are both part of the specification. Twist also moves strength in a curve rather than a line: adding twist increases strength up to a point and reduces it beyond that point, so a strength complaint is frequently a twist problem wearing a strength label.
Strength third, and reported as the product. On the lea test the convention is to multiply count by lea breaking load in pounds and report the count-strength product, because that number is comparable between counts and the raw breaking load is not. A laboratory that reports only the load is giving its customer a number that cannot be checked against anything.
We call this Count, Twist, Strength, and the practical consequence for a buying decision is simple: a bench that can measure strength but not count is not a yarn testing bench. If the budget covers two instruments, buy the count pair - a wrap reel with a balance of adequate resolution - and a twist tester, before the strength tester.
Textile fibres are hygroscopic. They take up and give off moisture with the surrounding air, and their mass, dimensions and breaking load move with it. This is why textile test methods specify a standard atmosphere for testing and a conditioning period in it before the test, and why a yarn laboratory in an un-conditioned room is producing numbers that describe the weather as much as the yarn.
There is a point to settle here before you buy anything, and it is one we would rather raise at the enquiry stage: the temperature in the standard atmosphere is not the same in every standard. Temperate standards and tropical standards specify different temperatures at the same relative humidity, and national standards in warm countries commonly adopt the tropical figure. Tell us which standard your customers name, because it decides the conditioning cabinet or room specification, and a laboratory that conditions to one figure cannot report results against the other.
The second practical point: conditioning takes time, and the specimen must reach equilibrium from the dry side. A laboratory under pressure that tests a specimen after twenty minutes in the room is not conditioning it. Build the conditioning period into the turnaround you promise.
The YTE-0001 Twist Tester determines how much twist is present and in which direction. Three things have to match the method you are reporting against.
Count can be determined by length and mass, or read directly from a short specimen. The two routes exist for different reasons, and most laboratories need both.
YTE-0003 Wrap Reel reels a known length of yarn so that it can be weighed. It is the reference route, and its accuracy has two halves that buyers often treat as one. The reel delivers the length, and the balance delivers the mass - so the resolution of the balance you already own decides whether the count determination is any good. On fine yarns a balance that reads to a hundredth of a gram is not enough. Ask us what resolution the counts you test require before you assume your existing balance will do.
YTE-0013 Beesley Balance reads count directly from a short thread, with no weighing step. Its real use is fabric analysis: when a thread is withdrawn from a finished fabric there is no way to obtain the long reeled length the wrap reel route needs, and this is the instrument that handles that case. It works with a set of templates, each cut for a particular count system and specimen length, and the result is only as right as the template matching the system you are reporting in. Keep the templates with the instrument and label them.
The YTE-0002 Yarn Evenness Tester measures variation in mass along the length of the yarn and reports it as a variation figure. That figure is useful for comparing one lot against another, but it is rarely what a complaint is about.
What customers complain about is imperfections: thin places, thick places and neps, counted per unit length. Those counts depend on the thresholds set in the instrument, which are expressed as percentage departures from the mean. Two laboratories running the same yarn with different thresholds will report different imperfection counts and both will be correct. Agree the thresholds, the test speed and the test length with your customer in writing before the first consignment, and record all three on every report. This single piece of housekeeping prevents more disputes than any instrument specification.
Crimp is the waviness in a yarn, and it is measured as the difference between the yarn straightened and the yarn relaxed, expressed as a percentage. The YTE-0009 Crimp Tester and the YTE-0010 Crimp Rigidity Tester cover this range, the second being used on textured yarns where the recovery behaviour, rather than the bare crimp figure, is the property of interest.
The number that decides a crimp result is the pretension used to straighten the specimen. Straightened is not an absolute state; it is whatever the specified load produces. Too little and the yarn is not straight, too much and you are stretching it, and in both cases the crimp percentage moves. The specified pretension is usually a function of the count, which is one more reason count comes first.
The YTE-0006 Lea Strength Tester breaks a lea - a skein of specified wrap length and number of wraps, prepared on the wrap reel - and reports the breaking load. Points to settle:
For single-end tensile work, and for fabric strip and grab tests, the instrument range sits with our fabric testing equipment rather than here.
We would rather state this plainly than let you discover it after an enquiry. Five of the thirteen records in this listing are not yarn instruments at all - they are carpet and floor covering testing instruments: the tuft withdrawal force tester, the carpet thickness gauge, the carpet abrasion tester, the rotary platform double head abraser and the inclined plane flammability tester. They are genuine products and we supply them; they are simply in a category named for something else, and we have flagged that to be split out. If you arrived here looking for carpet testing, you are in the right place.
YTE-0004 Tuft Withdrawal Force Tester measures how firmly a tuft is anchored in the backing. On cut pile it is a durability property; on loop pile it is closer to a safety property, because a loop that pulls out is a snag hazard. The result depends on the clamp design and the rate of withdrawal, both of which are specified by the method.
YTE-0011 Carpet Thickness Gauge and YTE-0005 Digital Thickness Tester read thickness under a defined load. There is no such thing as the thickness of a compressible material on its own: the presser foot area and the applied pressure are part of the measurement, they are specified in the method, and a gauge set up with the wrong foot gives a number that cannot be compared with anyone else.
YTE-0007 Rotary Platform Double Head Abraser and YTE-0012 Carpet Abrasion Tester wear a specimen under controlled conditions. The point buyers miss is that the abrasive wheels are a consumable and their condition is the test. Wheels load up with debris and change grade as they are used, so the method prescribes refacing at intervals, and a laboratory without a refacing disc and a record of refacings has an abrasion tester that drifts. Budget for wheels and refacing discs as a running cost, not a one-off purchase.
The YTE-008 Inclined Plane Flammability Tester holds a specimen at a defined angle and exposes it to a specified ignition source. Two things need to be said about it.
| Instrument | The question it answers | What actually decides the result |
|---|---|---|
| YTE-0001 Twist Tester | How much twist, and in which direction | Gauge length, pretension, and whether the method is direct counting or untwist-retwist |
| YTE-0003 Wrap Reel | The yarn count, by length and mass | Reeled length accuracy and the resolution of the balance used to weigh the skein |
| YTE-0013 Beesley Balance | The count of a thread taken from finished fabric | Using the template cut for the count system being reported |
| YTE-0002 Yarn Evenness Tester | Mass variation along the yarn, and imperfection counts | Test speed, test length, and the imperfection thresholds set in the instrument |
| YTE-0006 Lea Strength Tester | The load at which a prepared lea breaks | Conditioning, rate of traverse, and knowing the count so the product can be reported |
| YTE-0009 Crimp Tester / YTE-0010 Crimp Rigidity Tester | How much crimp is present, and how it recovers | The pretension used to straighten the specimen |
| YTE-0005 Digital Thickness Tester / YTE-0011 Carpet Thickness Gauge | Thickness under a defined load | Presser foot area and applied pressure, both specified by the method |
| YTE-0004 Tuft Withdrawal Force Tester | How firmly tufts are anchored in the backing | Clamp design and rate of withdrawal |
| YTE-0007 Rotary Platform Double Head Abraser / YTE-0012 Carpet Abrasion Tester | How the surface wears under controlled abrasion | Abrasive wheel grade, and refacing discipline between tests |
| YTE-008 Inclined Plane Flammability Tester | How the surface behaves under a specified ignition test | Which national standard the apparatus is built to |
Related ranges: fabric testing equipment, coated fabric testing equipment, footwear testing equipment, and the wider testing machines range including metal testing machines and general testing equipment.
You can report the breaking load, but it is not comparable with anything. The convention on the lea test is to report the count-strength product, count multiplied by lea breaking load in pounds, and that requires the count. In practice a laboratory that reports load alone will be asked for the count by the first customer who tries to check the figure.
Not necessarily. Direct counting and untwist-retwist are different procedures and can give different figures on the same yarn, which is why the method is reported with the result. Decide which method your laboratory uses as standard, and state it on the report form rather than leaving it to the operator.
For count and strength it is the dominant error, larger than anything to do with the instruments. Fibres gain and lose moisture with the room, and the mass and the breaking load move with the moisture. If a conditioned room is not possible immediately, a conditioning cabinet for specimens is the useful intermediate step, and results should carry the conditions they were obtained under. Tell us the constraint and we will quote accordingly.
No, they answer the same question in different situations. The wrap reel and balance route is the reference method for yarn supplied as yarn. The Beesley balance exists for threads withdrawn from finished fabric, where a long reeled length cannot be obtained. A laboratory doing both yarn testing and fabric analysis needs both.
Because the abrasive wheels are the test surface and they change with use. They load with debris and lose cut, so the method prescribes refacing at set intervals, and wheels are replaced when they reach the end of their useful life. A laboratory that treats the wheels as a permanent part of the machine will see its abrasion results drift in one direction and will usually blame the specimens.
That depends on your buyer and the destination market. The apparatus is built to a specified standard and gives you development, screening and quality control capability in your own laboratory. Where a flammability result carries regulatory or contractual weight, the destination market often requires it to come from a laboratory accredited for that method. Confirm the requirement with your buyer in writing before shipping, and tell us which standard you need the apparatus built to.
Ray Export is a manufacturer and exporter of laboratory, scientific and educational equipment based at Plot No. 449, HSIIDC Industrial Area, Saha, Ambala, Haryana 133104, India. Enquiries: [email protected], +91-9817319615.
Written by Palak Mall, Senior Content Writer. Technically reviewed by Arvind Kumar, Lab Equipment Specialist, 12+ years in laboratory and testing instrumentation. Last updated: 17 October 2026.
Notes on this listing, published rather than hidden: the code YTE-008 is not padded to four digits as the rest of the range is, and we are correcting it. The record shown as "Rotary Platform Double" is a rotary platform double head abraser; the name is truncated. Five records in this category are carpet and floor covering instruments rather than yarn instruments, and we have flagged the category to be split. Standards references on this page are described generically because the applicable standard differs by market; we will confirm the exact standard an instrument is built to, in writing, at the quotation stage. Specifications are confirmed in writing on the quotation; for certifications, contact us for the latest copies of the relevant certificates before tender submission.
Cover Thickness Gauge - The demonstrated thickness of any heaped or raised floor covering depends impressively on the heap being applied on it amid estimation of thickness. Additionally, the showed thickness gets decreased logically as the heap following up on it is expanded. Therefore it is essential that the thickness is resolved under a predefined stack with the goal that the esteem decided could be viewed as standard. A cover thickness check is utilized for deciding the thickness of the floor covering under a predefined stack. It can likewise be utilized for assurance of thickness under various burdens, in this manner giving a sign of the obstruction of floor covering to pressure under load, and additionally its capacity to recoup from the impacts of such loads after the heap is expelled. The Carpet Thickness Gauge is intended to quantify the thickness of floor covers under various burdens. It comprises of an inflexible metallic casing having a stacking pole held with its pivot vertical, equipped for moving unreservedly inside two metal guide brambles. The pole has a level barrel indentor mounted on its lower end and a little metallic circle mounted on its body. Opened circle weights of fitting stacking limit can be put on the plate to empower diverse burdens to be connected on the floor covering under test. The bar and the heap can be raised or brought down with the assistance of a lever arm. and A dial marker is given over the stacking pole. The tip of the dial pointer can be acquired contact with the upper face of the pole. An electrical framework comprising of a LED and dry cells is given to empower the thickness to be estimated without the power of the dial pointer following up on the surface of the floor covering under test. common lab types of gear makers.
Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering educational equipment, engineering equipments exporters, engineering equipments suppliers, engineering equipments supplier, engineering educational equipments, engineering equipments manufacturers in Ambala, India.
Cover Abrasion Tester - Abrasion opposition is the most critical property on which the solidness of a cover depends. Scraped spot obstruction of floor coverings is controlled by rubbing a round test example against a predetermined abradant for different number of rubs and deciding misfortune in mass versus number of rubs, or the quantity of rubs required to uncover the sponsorship. The& Carpet Abrasion Tester comprises of two vertical shafts turning a similar way at same speed with their focuses balance. The example of cover is cinched on the lower shaft and is rubbed against a bigger hover of standard crossbred texture braced on the base of the upper shaft. The pivots of the poles are, for example, to give a steady relative speed amongst example and abradant at all parts of the example. A counter is given to record the quantity of rubs, with course of action to stop the machine consequently after preset number of rubs. Means for applying a consistent weight by stacking the upper shaft on the test example are additionally given. common lab types of gear producers.
Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering lab equipments, engineering equipment manufacturer india, engineering equipment india, chemical engineering lab equipments, control engineering laboratory equipments, control engineering laboratory equipment, control engineering lab equipment in Ambala, India.
Ray Exports Beesley adjust is utilized for computing direct yarn tally. The measuring scale is made of an aluminum shaft which spun at a section with the assistance of two gem bearing. The pillar on both the sides is furnished with a tempered steel snare for putting the yarn. The pointer side of the pole is furnished with a space for hanging the weight. The bar get together is settled in a metal sheet box which has a straightforward sliding window for avoiding the wind current in the instrument.
Ray Export Beesley Balance is furnished with a layout to set up the example of various sizes. Once the texture is created, it experiences the way toward weaving, coloring, dying, and so on. These procedures, increments or reductions the estimation of fineness of a texture. Consequently, to decide the fineness or tallies of yarn, Bessley Balance is generally utilized.
Highlights:
· Provides high productivity.
· Ensures Silent and Smooth activities.
· Rust Resistance wrap up.
· Durable.
Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering educational equipment, engineering equipments exporters, engineering equipments suppliers, engineering equipments supplier, engineering educational equipments, engineering equipments manufacturers in Ambala, India.