Synchro transmitter-receiver pair with calibrated dials Locking system for receiver rotor Receiver use as control transformer Built-in balanced demodulator circuit Panel meter for AC/DC voltages.
Temperature controller with facilities for P. I, D and relay control blocks. Operating temperature: Ambient to 90° C. Separate controls for P, I, D channel gains. Fast 25W oven fitted with IC temperature sensor. Digital display of set and measured temperature on 3 1/2 digit built-in DVM.
Study of 4 different temperature transducers - NTC thermistors, RTD Platinum, K(Cr-Al) thermocouples, IC temperature sensors. Study & comparison of temperature transducer controlled alarm system Instrumentation amplifier, add on amplifier : X1, X100, X235 Digital meter: Actual/set temp/MV.
Position control of a 12V, 1A d.c. gear motor (50rpm) Provision for positive and negative tachogenerator feedback. Tacho constant: 2V/ 1000 rpm approximately. Calibrated dials for reference and output position: resolution 1°. UP based waveform capture card.
2-phase servomotor 12V/ phase, 50Hz, 10W. Power amplifier. Servo potentiometer type error detector. In-built 10.00V (rms) panel meter. uP based waveform capture card.
Square & Sine source of Frequency: 10, 20, 40, 80, 100, 200, 400, 800 and 1000Hz Simulated 2nd order linear plant. Facility for displaying x and x signaling. Dead zone variable from 0-600mV. Hysteresis variable from 0-500m
Square & Sine source of 25Hz to 800Hz Simulated \'uncompensated\' system having adjustable damping. Built-in variable gain amplifier & is adjustable from 1 to 11.
Signal stepping and free running modes of operating with speed variation and direction reversal using internal TTL circuit. 360° motion Servo-Potentiometer position-pickup for motor dynamics. Operation through microprocessor kit-sample control programs provided. Stepper motor of Torque 3 Kg-cm with Step angle of 1.8°.
Built-in D/A and A/D circuit (8-bit) 8085 based uP-kit as digital controller with user software in 8K EPROM. 16-bit arithmetic for algorithm calculations. 16 built-in levels of p. I and D gain each
2-phase a.c. servomotor - 12V/50Hz per phase. Small generator for loading. 4-digit speed display, 3-digit time constant display. 3 1/2 digit r.m.s. voltmeter & d.c. panel meter.
Login
Register
+91 9817319615
