science lab equipment manufacturer

Engineering Gear Models

Engineering Gear Models Lab Equipment Manufacturer, Supplier and Exporter in India

Ray Export is a leading manufacturer and supplier of Engineering Gear Models in India,

Gear Models and Structural Theorem Apparatus

Quick answer. This listing holds about seventeen records coded EGM-, and it contains two unrelated ranges. The first half is what the category name promises: gear models - single, two and three stage spur, bevel, helical, spiral and herringbone, plus a gear set. The second half is structural analysis demonstration apparatus: Maxwell-Betti reciprocal theorem, Muller-Breslau end moment, moment distribution coefficient, fixed end moments and displacement fixing moments. Those belong with structural mechanics, and we have flagged them to be moved. Both halves are demonstration apparatus, and both should be judged by one test, set out below: can a student get a number out of it and compare that number with the theory? If not, it is a display.

The apparatus that proves a theorem

There is a particular kind of teaching apparatus whose job is not to show how a machine works but to make an abstract result undeniable. A student can be told that deflections are reciprocal, or that a double helical gear cancels its own axial thrust, and will write it down without believing it. An apparatus that yields a measurement settles the matter in ten minutes.

That is what almost everything in this listing is for, and it gives a single, practical buying test with three parts:

  1. Is the quantity measurable? A dial gauge, a scale, a known load, known tooth numbers - something that produces a number, not only a movement.
  2. Is the geometry known? A gear train model without stated tooth numbers cannot be used for a ratio calculation; a beam model without stated span and section cannot be compared with theory. The data sheet is part of the apparatus.
  3. Does it return to zero? This is the one buyers never ask. A structural model with friction in its joints, slack in its pins or permanent set in its members gives different readings loading and unloading, and the theorem it was bought to prove will appear to fail. The student then concludes either that the theory is wrong or that measurement is pointless. Both are worse outcomes than not running the experiment at all.

The gear models: what each type exists to demonstrate

Gear models are among the few teaching aids that genuinely cannot be replaced by a drawing, because the relationships are three-dimensional and depend on what happens along the axis as much as around it. Each type in this listing has one thing it teaches better than anything else:

ModelWhat it demonstrates that a diagram cannot
Single, two and three stage spur gears (EGM-0001 to EGM-0003)How a train ratio compounds stage by stage, and why a large reduction needs stages rather than one enormous wheel. With tooth numbers stated, the three models are a complete ratio exercise.
Single stage bevel gears (EGM-0004)Transmission between intersecting shaft axes, and the fact that the teeth lie on a cone, so the pitch varies along the tooth and the gears must be mounted to a defined apex position.
Single stage helical gears (EGM-0005)That a helical gear generates an axial thrust. This is the teaching point: the smoother, quieter engagement is paid for with a force along the shaft, which the bearings must carry. Students who have handled the model understand why a thrust bearing appears in the drawing.
Single stage spiral gears (EGM-0006)Transmission between non-parallel, non-intersecting shafts, where contact is effectively a point rather than a line - hence the limited load capacity.
Herringbone gears (EGM-0008)Why double helical teeth exist at all: the two opposite helices produce equal and opposite axial thrusts, which cancel. Shown immediately after the helical model, this is one of the most satisfying pairs in an engineering collection - a problem and its solution, in metal.
Gear set (EGM-0007)Comparison in the hand: module, pitch, tooth count and face width across several gears at once, which is how a student learns what a module actually means.

Specify two things with any gear model: the tooth numbers, printed or stamped on the model itself rather than only in a catalogue, and whether it turns freely by hand without excessive backlash. A loose model teaches backlash whether you intended it to or not, and a model whose tooth numbers are unknown is an ornament.

The structural apparatus: reciprocity, influence and distribution

The second half of this listing covers three of the most important ideas in the analysis of indeterminate structures, and it covers them well, because all three are ideas students accept without understanding until they measure them.

Reciprocity: the Maxwell-Betti theorem

The reciprocal theorem states that the deflection at a point A caused by a load at B equals the deflection at B caused by the same load at A. It sounds like a coincidence, and it is the foundation of the flexibility method and of the symmetry of the stiffness matrix that every structural analysis program relies on.

The apparatus demonstrates it directly: load at one point, measure at another, swap them, compare. What decides whether the demonstration works is dial gauge resolution and the absence of friction - the two deflections are supposed to be equal, so the experiment is only convincing if the measurement is fine enough to show that they are equal to within a small percentage. Ask about gauge resolution and the condition of the supports, and keep loads small enough that behaviour stays linear and elastic.

Influence: the Muller-Breslau principle

This is the hardest idea in the subject and the one an apparatus helps with most. The principle says that the influence line for a reaction or an internal force has the same shape as the deflected form of the structure when that restraint is released and given a unit displacement. Stated in words it sounds arbitrary. Demonstrated on a model - release the restraint, impose a known displacement, measure the deflected shape, and find that it matches the influence line calculated independently - it becomes obvious, and it stays learned.

For this experiment the model must be flexible enough that the deflected shape can be measured at several points, and stiff enough to return to zero. Ask how many measuring positions are provided, because an influence line through three points is a guess and through eight is a curve.

Distribution: fixed end moments and moment distribution

Moment distribution is taught as an arithmetic procedure - fixed end moments, distribution factors proportional to member stiffness, carry-over, iterate - and students execute it correctly for years without a physical picture of what is happening. The apparatus in this listing measures the end moments on members of known stiffness meeting at a joint, so distribution factors can be verified rather than asserted, and fixed end moments can be measured for standard load cases.

Specification points: the member stiffnesses must be stated (section and span), the joint must be a genuine rigid connection rather than a bolted one that slips, and the moment measurement arrangement should be visible and checkable - a lever and dead weights, or a calibrated spring balance, rather than an unexplained readout.

One honest limitation applies to all three: these demonstrations depend on linear elastic behaviour and small deflections. Push the loads up to make the deflections easier to see and the theorems will begin to fail visibly. The load range belongs on the apparatus and in the laboratory instruction, and it is worth telling students why the limit exists - that is part of the lesson.

What to tell us when you enquire

  • Which half of this listing you want. They are different subjects, and the quotations are entirely different.
  • For gear models: whether tooth numbers must be marked on the models, and whether you want the helical and herringbone pair together, which is how they teach best.
  • For structural apparatus: the experiments your syllabus names, the dial gauge resolution you require, and how many measuring positions you need along the member.
  • Whether a data sheet or experiment manual is supplied with each item - for demonstration apparatus this is a large part of the value and the thing most often missing.
  • Whether the items are bench-mounted or free-standing, and the bench space available.
  • Destination country, and supply voltage where anything is powered.

Related ranges: structural mechanics lab and S.O.M. lab for the structural and materials experiments these demonstrations support, involute gear profile and tool dynamometers for gear geometry and cutting forces, theory of machines lab for instrumented dynamics rigs, models - theory of machines and engineering training models for mechanisms and linkages, and the full mechanical lab equipments category.

Frequently asked questions

Why does a helical gear need a thrust bearing?

Because the teeth are cut at an angle to the axis, so the force between mating teeth has a component along the shaft as well as around it. That axial component has to be carried by a bearing. It is the price of the helical gear's smoother, quieter engagement, and it is the single most useful thing a helical gear model teaches - particularly when a herringbone model is handled immediately afterwards, where the two opposite helices cancel the thrust between them.

What makes a gear model usable for calculation rather than only display?

Stated tooth numbers, marked on the model, and free rotation without excessive backlash. With tooth numbers the three spur models become a compound ratio exercise; without them a student can observe that the output turns more slowly and can calculate nothing. Ask for the numbers to be stamped or engraved rather than printed on a label that will be gone in two years.

Why is the Maxwell-Betti demonstration worth a laboratory session?

Because reciprocity is the assumption behind the flexibility method and behind the symmetric stiffness matrices in every structural analysis program students will use. Told it, they write it down; having measured it, they understand that it is a property of linear elastic structures rather than a convenience. It also teaches measurement discipline, because the result is a comparison of two nearly equal numbers, which only works if instrument resolution is adequate and the model returns to zero.

Our structural model gives different readings when loading and unloading. Is it faulty?

Usually it is friction, slack at a pin or support, or loads taken high enough to leave permanent set. Check that the model returns to its zero reading with the load removed before taking any set of results - and make that check part of the laboratory procedure, because every theorem demonstrated here assumes linear elastic behaviour. If the model does not return to zero, no amount of careful reading will make the theorem appear to hold.

How many measuring points do we need for an influence line demonstration?

Enough to show a curve rather than imply one: three points can be joined by almost any shape, and eight produce something a student can compare with a calculated influence line. Ask how many positions the apparatus provides and whether the dial gauge can be moved along the member, because that determines whether the experiment demonstrates the principle or merely alludes to it.

Why are structural analysis demonstrations in a category called gear models?

Because the category was built around gear models and other items were added to it over time. We have said so rather than writing copy that implies a coherence it does not have, and we have recommended that the structural apparatus be moved to the structural mechanics category where buyers will look for it. The products themselves are unaffected; tell us which you want and we will quote it directly.

Key takeaways

  • Judge demonstration apparatus by whether it produces a number that can be compared with theory - measurable quantity, known geometry, and a model that returns to zero.
  • Tooth numbers marked on the model are what turn a gear display into a ratio exercise.
  • Buy the helical and herringbone models together. One creates the axial thrust problem, the other solves it, and the pair teaches in minutes what a paragraph does not.
  • Reciprocity needs resolution. The Maxwell-Betti demonstration compares two nearly equal deflections, so dial gauge resolution and friction-free supports are the specification.
  • An influence line needs measuring positions. Three points prove nothing; eight make the Muller-Breslau principle obvious.
  • All of these demonstrations assume linear elastic small deflections. Keep the loads inside the stated range, and tell the students why the limit exists.

About this page

Ray Export is a manufacturer and exporter of laboratory, scientific and educational equipment based at Plot No. 449, HSIIDC Industrial Area, Saha, Ambala, Haryana 133104, India. Enquiries: [email protected], +91-9817319615.

Written by Palak Mall, Senior Content Writer. Technically reviewed by Arvind Kumar, Lab Equipment Specialist, 12+ years in laboratory and testing instrumentation. Last updated: 17 October 2026.

Notes on this listing, published rather than hidden: about half the records in a category named "engineering gear models" are structural analysis demonstration apparatus, and we have recommended they be moved to the structural mechanics category where buyers will look for them. Several records are named after the theorem rather than after the product - "Maxwell-Betti Theorems", "Fixed End Moments", "Displacement Fixing Moments" - which tells a buyer the subject but not what arrives on the pallet; we are renaming them. The principle recorded as "Muller-Breslau" is properly written with an umlaut over the u, and we print the plain spelling here because that is how it is most often searched. One record is listed only as a "Lecturers Demonstration Kit" with no contents stated; ask us and we will send the list. All specifications, resolutions and certification claims will be confirmed in writing on the quotation; verify them before tender submission; for certificates, contact us for the latest copies of the relevant certificates.

Lecturers' Demonstration Kit

EGM-0011

Highlights Cost powerful showing help Enables seven models to be assembled Each model independent Excellent prologue to the hypothesis for excess structures Three year guarantee Description See the individual investigations. Every one of the parts to make the models are given and the arrangement of weights required for the analyses is incorporated. A total arrangement of Lecturer's Instruction Manuals and understudies research facility sheets is provided. There is likewise a Manual clarifying the development of every one of the seven models..

Maxwell-Betti Theorems

EGM-0012

Highlights Self-contained model Immediate simple arrangement Effective showing help Demonstrates the entire complementary correspondence of powers and removals For address or research facility Three year guarantee Range of Experiments Measurement of avoidances and turns for elective arrangements of burdens and minutes at proportional areas on a shaft Description The model is based on a squeezed steel base with plastic docks that help a solitary traverse adaptable steel bar on swiveling direction which can oblige even development while empowering outside minutes to be connected and estimated. An embedded bolting pin makes a settled end. Pivot of the bar at the help is appeared by a substantial shaded pointer moving over a double scale, the coarse one being promptly observed at 10 m separate. Double diversion scales on movable vertical presents empower relocations on be estimated and seen at 10 m remove. The arrangement of weights required for the trial is incorporated. This hardware is a piece of a range intended to both show and tentatively affirm essential building standards. Awesome care has been given to every thing to give wide trial scope without unduly entangling or trading off the outline. Each bit of mechanical assembly is independent and conservative. Setting up time is insignificant, and all estimations are made with the least complex conceivable instrumentation, so the understudy inclusion is absolutely with the designing standards being instructed. An entire direction manual is given depicting the device, its application, exploratory technique and ordinary test outcomes..

Moment Distribution Coefficient

EGM-0013

Highlights Self-contained model Immediate simple arrangement Effective showing help Illustrates minute conveyance coefficients and extend For address or research facility Three year guarantee Range of Experiments Measurement of minute dispersion coefficients for a remote end settled and free Measurement of continue factor to a settled end Description The model is based on a squeezed steel base with plastic wharfs that help a solitary traverse adaptable steel pillar on swiveling orientation which can suit flat development while empowering outside minutes to be connected and estimated. An embedded bolting pin makes a settled end. Revolution of the shaft at the help is appeared by an expansive hued pointer moving over a double scale, the coarse one being promptly observed at 10 m remove. The arrangement of weights required for the investigation is incorporated. This gear is a piece of a range intended to both show and tentatively affirm essential building standards. Extraordinary care has been given to every thing in order to give wide trial scope without unduly muddling or trading off the plan. Each bit of device is independent and conservative. Setting up time is insignificant, and all estimations are made with the most straightforward conceivable instrumentation, so the understudy inclusion is absolutely with the designing standards being educated. A total direction manual is given portraying the mechanical assembly, its application, trial strategy and normal test outcomes..

Muller-Breslau End Moment

EGM-0014

Highlights Self-contained model Immediate simple arrangement Effective showing help Demonstrates how display examination gives excess powers To address or research center Three year guarantee Range of Experiments Measurement of the repetitive settled end minute in a two traverse nonstop pillar Description The model is based on a squeezed steel base with plastic docks that help a solitary traverse adaptable steel bar on swiveling direction which can suit flat development while empowering outside minutes to be connected and estimated. An embedded bolting pin makes a settled end. Turn of the shaft at the help is appeared by a huge hued pointer moving over a double scale, the coarse one being promptly observed at 10 m separate. Double diversion scales on customizable vertical presents empower removals on be estimated and seen at 10 m separate. One end bolster has a screw stressing gadget for forcing a settled pivot. This gear is a piece of a range intended to both show and tentatively affirm essential designing standards. Incredible care has been given to every thing in order to give wide test scope without unduly confusing or bargaining the plan. Each bit of mechanical assembly is independent and conservative. Setting up time is insignificant, and all estimations are made with the least difficult conceivable instrumentation, so the understudy contribution is absolutely with the building standards being instructed. An entire direction manual is given portraying the contraption, its application, exploratory technique and run of the mill test comes about

Muller-Breslau Reactions

EGM-0015

Highlights Self-contained model Immediate simple arrangement Effective showing help Demonstrates how display examination gives repetitive powers To address or research center Three year guarantee Range of Experiments Measurement of the excess responses at the backings in a two traverse ceaseless shaft Description The model is based on a squeezed steel base with plastic docks that help a solitary traverse adaptable steel bar. Swiveling course can oblige even development while empowering outside minutes to be connected and estimated. An embedded bolting pin makes a settled end. Double avoidance scales on flexible vertical presents empower removals on be estimated and seen at 10 m separate. An arrangement of thick plates is provided to empower a constrained uprooting to be created toward one side and the inward backings. A total direction manual is given portraying the device, its application, test methodology and hypothesis. Despite the fact that the gear is composed essentially for use by addressing staff, the manual has a segment accommodated singular understudy utilize.

General Purpose Snips

EE-0379

Broadly useful Snips Length: 130mm,


Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering lab equipments, engineering equipment manufacturer india, engineering equipment india, chemical engineering lab equipments, control engineering laboratory equipments, control engineering laboratory equipment, control engineering lab equipment in Ambala, India.


Foot Pump

EE-0680

Foot Pump with weight measure meter perusing meters from 0-100 lb/in and 0-7 kg/cm


Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering educational equipments manufacturer, engineering educational equipments in india, physics lab engineering equipment suppliers, civil engineering lab equipments, civil engineering lab instruments, engineering equipment manufacturer in Ambala, India.


Supply of Engineering Gear Models from India to Finland, France, Tanzania, Thailand, Sri Lanka, Congo, Costa Rica, Ivory Coast, Croatia, Cuba, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, United Arab Emirates (UAE, Dubai), United Kingdom (London), United States, Uruguay, Uzbekistan, Vanuatu, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma Myanmar, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia (Addis Ababa), Fiji, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Central African Republic, Chad, Chile, Colombia. Math Teaching Kit suppliers in Luxembourg, Macedonia, Madagascar, Malawi (Lilongwe), Malaysia (Kuala Lumpur), Maldives, Mali, Malta, Marshall Islands, Mauritania, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Comoros, Congo. Math Teaching Kit manufacturers in Dominican Republic, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hungary, Iceland, Indonesia, Iran, Iraq, Niger, Nigeria (Abuja), Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines (Manila), Poland, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya (Nairobi), Kiribati, Korea, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Mauritius, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Portugal, Qatar, Romania, Russia, Rwanda (Kigali). Math Teaching Kit exportets to Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Sudan, Spain, Sudan, Suriname, Swaziland, Sweden, Switzerland, Syria, Tajikistan, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda (Kampala), Ukraine, Venezuela, Vietnam, Yemen , Zambia (Lusaka), Zimbabwe
'); popupWin.document.close(); }