science lab equipment manufacturer

Industrial Training Kits

Industrial Training Kits Lab Equipment Manufacturer, Supplier and Exporter in India

Ray Export is a leading manufacturer and supplier of Industrial Training Kits in India,

Industrial Training Kits and Engineering Rigs

Quick answer. About twenty records coded ITK- hold engineering teaching rigs: a Coriolis components of acceleration apparatus, solid-liquid extraction, a fluidised bed dryer, motorised gyroscopes, multi-cylinder petrol and single-cylinder diesel engine test rigs, a separating and throttling calorimeter, and a flow-over-notches apparatus. These are the same rigs that appear in our mechanical and chemical engineering listings, and the evidence that they are copies rather than a separate range is in the names - two records carry a trailing "1" appended to an otherwise identical name, which is what happens when a record is duplicated. We say so below and link to the ranges they came from. The useful question this page can answer is the one the category name raises: are you training people to operate equipment, or to measure with it? Those are different purchases, and the same rig serves both badly unless it was specified for one.

Trained to operate, or trained to measure?

A university laboratory and a company training department buy what looks like the same rig for completely different reasons, and the specification that satisfies one disappoints the other.

Academic laboratoryIndustrial or vocational training
The outputData: a set of readings, a graph, a comparison with theory, a reportCompetence: a person who can start it, run it, recognise a fault and shut it down safely
What it must haveInstrumentation. Measurable quantities, adequate resolution, and a measurement chain that can be checkedRealistic controls and access. The switches, valves and gauges of the real plant, and panels that open so maintenance can be practised
FaultsA nuisance - they interrupt the measurementThe point. Switched, repeatable faults the instructor can set unseen are what make the rig examinable
Who sets it upA technician, once, for a term of practicalsThe trainee, every time - so set-up is part of the exercise and must be safe to get wrong
Documentation neededTheory, procedure, observation tables, worked exampleOperating procedure, maintenance schedule, fault list, and a competence checklist for assessment
The usual disappointmentA rig that demonstrates but cannot be measured - see our theory of machines lab page on what a rig must let you varyA rig with beautiful instrumentation and no realistic controls, which trains nobody to operate anything

So tell us which you are, in one sentence, at the start of the enquiry. If the answer is both - which is common in a polytechnic that teaches an academic syllabus and an industry-facing programme - say that too, because the honest answer is usually that one rig cannot do both well and two simpler rigs serve better than one compromise.

What a training rig needs that an academic rig does not

  • Controls that look like the plant. A trainee who learns a process on a rig with unlabelled toggle switches has learned the process and not the job. Ask whether the controls, gauges and indicators correspond to industrial practice.
  • Maintenance access. Can panels be removed, filters changed, belts tensioned, seals replaced - and is there a maintenance schedule to work to? Maintenance is half of what a technician does and most training rigs cannot be maintained at all.
  • Switched faults, settable unseen. Ask how many, of what kind, and whether the instructor can set one without the class seeing which. That last detail is the difference between a demonstration and an assessment - the same point we make about refrigeration trainers.
  • A competence checklist. Industrial training is assessed against can-do statements, and a rig supplied with a checklist mapped to those statements saves a trainer a week of writing. Ask whether one exists; if not, budget the time.
  • Consumables and spares, with prices. A training rig is run far harder than a laboratory rig - every trainee starts it, loads it and stops it - so the wear parts matter. Get the list and the prices with the quotation.
  • Safe to get wrong. Trainees will do the wrong thing; that is what training is for. Ask what happens when they do - interlocks, relief devices, and whether a wrong sequence damages the rig or merely refuses.

Where these rigs actually live in our catalogue

Rather than describe the rigs twice, here is where each group is covered properly, with the specification detail on the page that owns it:

If you are buying for an industrial training programme, start from those pages for the technical specification and tell us the operate-or-measure answer so that we quote the right configuration.

What to tell us when you enquire

  • Whether you are training people to operate and maintain, or teaching an academic syllabus - or both, and in what proportion.
  • The competence standard or syllabus you are assessed against.
  • Whether switched faults are required, how many, and whether they must be settable unseen.
  • Whether maintenance tasks are part of the training, and which ones.
  • Trainee numbers and throughput - a rig run by forty trainees a month needs different wear parts from one used twice a term.
  • Services available: electrical supply, water, drainage, compressed air, gas, extraction.
  • Destination country, supply voltage and frequency, and the route into the room.

Related ranges in this branch: metallurgical equipment, advanced physics experiments and science teaching equipment. The full educational kit and educational lab equipment categories list the rest.

Frequently asked questions

What is the difference between an academic rig and a training rig?

The output. An academic rig must produce measurements - instrumentation, resolution, a checkable measurement chain - so that students can plot results and compare them with theory. A training rig must produce competence - realistic controls, maintenance access, switched faults and a procedure to follow - so that a trainee can operate, maintain and diagnose. The same rig serves both badly unless it was specified for one, and two simpler rigs often beat one compromise.

Why does fault insertion matter so much for industrial training?

Because diagnosis is the employable skill, and it cannot be practised on a rig that always works. Ask how many faults, of what kinds - open circuit, blockage, leak, mis-set control, worn component - and crucially whether the instructor can set one without the class seeing which. That single detail decides whether the exercise is an assessment or a demonstration.

Can trainees damage the rig by operating it wrongly?

Ask, because it determines how freely you can let them learn. The right answer is that a wrong sequence refuses rather than destroys - interlocks, relief devices and a controller that will not allow an unsafe combination. Trainees will do the wrong thing; that is the purpose of training. A rig that must be operated perfectly is a rig the instructor ends up operating.

Why do these rigs also appear in your other listings?

Because this category holds copies of them. Two records carry a trailing "1" appended to an otherwise identical name, which is the signature of a duplicated record, and the engine, gyroscope, mass transfer and fluid mechanics rigs are all covered in depth on the pages linked above. We have published that rather than describe the same equipment twice, and the duplication is flagged for a database check.

What should we budget beyond the rig?

Consumables and wear parts, with prices, because a training rig is run far harder than a laboratory one - every trainee starts it, loads it and stops it. Then the documentation: an operating procedure, a maintenance schedule, a fault list and a competence checklist. If the checklist is not supplied, budget trainer time to write one, because that document is what turns the rig into an assessable course.

Can one rig serve both a degree course and an industry programme?

Sometimes, and it is worth being clear-eyed about it. A rig with good instrumentation and realistic controls and switched faults exists but costs more than either single-purpose version, and a compromise rig usually disappoints both audiences. Tell us the proportion of each use and we will say whether one rig or two is the better value - and we will say two when it is.

Key takeaways

  • Answer the operate-or-measure question first. It changes the specification completely.
  • Industrial training needs realistic controls and maintenance access, which most academic rigs do not have.
  • Switched faults, settable unseen, are what make a training rig examinable.
  • Ask for a competence checklist mapped to your standard, or budget the time to write one.
  • Get consumables and wear parts with prices - a training rig is run far harder than a laboratory rig.
  • The rigs in this listing are covered properly elsewhere in our catalogue. Start from those pages for the technical detail.

About this page

Ray Export is a manufacturer and exporter of laboratory, scientific and educational equipment based at Plot No. 449, HSIIDC Industrial Area, Saha, Ambala, Haryana 133104, India. Enquiries: [email protected], +91-9817319615.

Written by Palak Mall, Senior Content Writer. Technically reviewed by Arvind Kumar, Lab Equipment Specialist, 12+ years in laboratory and testing instrumentation. Last updated: 17 October 2026.

Notes on this listing, published rather than hidden: this category appears to hold copies of records from our mechanical and chemical engineering listings rather than a distinct range. The evidence is in the names - "Fluidized Bed Dryer 1" and "Motorised Gyroscope Apparatus 1" carry a trailing digit appended to an otherwise identical name, which is what happens when a record is duplicated, and the same pattern has been found in four other listings on this site. We have therefore written this page as buying guidance and a route to the pages that cover the equipment properly, rather than describing the same rigs twice. Also flagged: one record is named "Mass Transfer Lab Equipment", which is the name of one of our categories rather than of a product; the codes are out of sequence with gaps; several names are stored in capitals while others are not; and one reads "FOUR STROKEDIESEL" with a missing space. All specifications will be confirmed in writing on the quotation; verify them before tender submission.

Soxtherm Automatic Oil Extraction System

ITK-0034

Particular: 


· The controller shows the set temperature and real temperature with auto change over of 


stage to higher temperature inclines propotional to prearranged memorisedtime - temp. 


space 


· Measuring Range: 0.1 to 100% fat/oil 


· Repeatability: + 1% or better 


· Extraction Vessel: Borosilicate Extraction Vessel (2 Nos.) 


· Collection Vessel: Borosilicate gathering Beakers (2 Nos.) 


· Total Volume - 120 ml, Working volume 100ml 


· Extraction Thimble: Thick Nitrocellulose thimbles (25 mm dia X80mm L) (One Box of 25 


Thimbles) 


· Highly flexible to oblige 2 sizes of Thimble 


· Optional Macro Thimbles of size (33 mm dia x 80mm L) good in the framework 


· MS Powder covered Thimble Stand (1 No.) 


· Thimble Holder/Adaptor (Specially Designed FRP Holder) - 2 Nos. 


· Digital Timer: Range : 0-99.59 (Settable in hrs, min and seconds), Digital show of set time and 


real time, 


· Modes of activity: warmer cut off mode and caution mode 


· Cold water line for buildup of dissolvable with silicon hose interconnectivity to condenser 


· The System is planned with culminate close circled flow course of action to be blast confirmation. 


There is no plausibility of dissolvable contact with any warming framework/square and so forth. 


· MS lodging with Anti destructive Powder covered wrap up 


· At standard with AOAC Methodology 


· Electrical Requirement:230V/50Hz. Air conditioning Mains.


Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering lab equipments, engineering equipment manufacturer india, engineering equipment india, chemical engineering lab equipments, control engineering laboratory equipments, control engineering laboratory equipment, control engineering lab equipment in Ambala, India.


Knapsack Sprayer

ITK-0035

Attributable to our advanced modern encounters, we are conferred towards giving a wide assortment of great quality Knapsack Sprayer. 


Highlights: 


· Easy to work 


· Robust outline 


· Long working life 


Notable Features: 


· Tank Capacity 16 Ltrs. 


· Easy to Operate. 


· Can be filled on both side for left and right hand tasks according to decision. 


· Light in task. 


· Automatic tumult of splash material 


· Brass weight chamber 


· Plastic Skirt 


· Strong Color Corrugated Box Packing 


· Bush Handle 


· Iron Skirt base


Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering educational equipment, engineering equipments exporters, engineering equipments suppliers, engineering equipments supplier, engineering educational equipments, engineering equipments manufacturers in Ambala, India.

Supply of Industrial Training Kits from India to Finland, France, Tanzania, Thailand, Sri Lanka, Congo, Costa Rica, Ivory Coast, Croatia, Cuba, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, United Arab Emirates (UAE, Dubai), United Kingdom (London), United States, Uruguay, Uzbekistan, Vanuatu, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma Myanmar, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia (Addis Ababa), Fiji, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Central African Republic, Chad, Chile, Colombia. Math Teaching Kit suppliers in Luxembourg, Macedonia, Madagascar, Malawi (Lilongwe), Malaysia (Kuala Lumpur), Maldives, Mali, Malta, Marshall Islands, Mauritania, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Comoros, Congo. Math Teaching Kit manufacturers in Dominican Republic, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hungary, Iceland, Indonesia, Iran, Iraq, Niger, Nigeria (Abuja), Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines (Manila), Poland, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya (Nairobi), Kiribati, Korea, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Mauritius, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Portugal, Qatar, Romania, Russia, Rwanda (Kigali). Math Teaching Kit exportets to Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Sudan, Spain, Sudan, Suriname, Swaziland, Sweden, Switzerland, Syria, Tajikistan, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda (Kampala), Ukraine, Venezuela, Vietnam, Yemen , Zambia (Lusaka), Zimbabwe
'); popupWin.document.close(); }