In most mechanical procedures including reactors, warm is to be added or separated to control the procedure. The expansion and evacuation of warmth is finished by passing steam in coat fitted to the outside of the vessel or passing chilly. Water in helical loop inside the vessel. For compelling warmth exchange and even dissemination of warmth, the fluid inside is ceaselessly disturbed. The present set-up offers us. A near investigation of Jacket and Helical curl, which can be worked at the same time. It is a stainless steel jacketed vessel inside which, a helical loop of copper is fitted. A variable speed stirrer is fitted in vessel. The framework is such composed that either steam or water is permitted to enter inside anybody of the coat and helical loop by a course of action of control valves. Variety in temperature of inside water is estimated and is noted. Set-up is fitted with steam traps for condensate accumulation.
Stream rate of water can be controlled and estimated utilizing valve and Rotameter. Temperature of gulf and outlet of both hot and cool liquids are estimated by temperature sensors.
Tests
To decide the general warmth exchange co-effective for different level of unsettling
To make a relative investigation of Heat Transfer through Jacket and Coil in an unsettled vessel
Utilities Required
Water supply 20 lit/min (approx.) and Drain.
Power Supply: 1 Phase, 220 V AC, 5.kW.
Floor territory of 1.5m x 1.5m
Login
Register
+91 9817319615
