Physics lab products Lab Equipment Manufacturer, Supplier and Exporter in India

• 1 air-cushion table 935 x 750 mm2
• 50 sheets of DIN A1 paper
• 2 inkjet pucks, diameter 100 mm, height 95 mm, weight without battery and ink cartridge, approx. 365 g
• 2 ink cartridges
• 2 NiMH batteries 9 V, 300 mAh
• 1 power supply
• 2 humidifier bases
• 1 infrared remote control
• 1 accessory kit for peripheral movement of one inkjet puck
• 1 accessory kit for gravitational movement of two coupled inkjet pucks
• 1 accessory kit for uniformly accelerated movement (3 weights of 5 cN each, return pulley, rope)
• 1 accessory kit for inclined movement
• 1 accessory kit for circular motion
• 2 foam rings for inelastic shock
• 2 Velcro tapes for inelastic shock 
• 2 additional weights
• 1 airtight storage box for ink cartridges

• 24 h / 0.01 s / 1 s
• Timer, showing normal time, hours, minutes, seconds.
• Days, dates, months are displayed, 1/100th second. With alarm

• For the study of seasons, day-night alternation, moon cycles, solar and lunar eclipses
• A set of gears is used to faithfully reproduce the movements of the Earth and Moon

• Removable Ø150mm PVC disc
• 3-7.2V DC motor
• Safety sockets 
• It consists of a disc with spectrum colors. 
• Mounted on stand with turning wheel and handle

• Set of materials dedicated to the study of electricity. Optimized selection for 17 experiments directly inspired by international curricula on the subject.
• All equipment must be stored in a box with a captive lid and built-in hinged handle.
• The lid closes with a patented bayonet locking system, enabling several boxes to be firmly joined together to form a stable stack that can be transported with just one hand.
• To remove a box from the stack, simply lift the central locking system.
• Inside the box, a foam insert with pre-formed cavities ensures long-lasting storage of components.
• The set is accompanied by educational literature in the form of manuals with student and teacher books supplied in electronic form for easy reproduction.

• Electric current
• Solid electrical conductors
• Liquid electrical conductors
• AND/OR and bidirectional circuits
• Successful experiment
• Relays and bells
• Voltaic cells*.
• Wiring of voltage sources*.
• V-I characteristics**
• Determining resistance**
• Two lamps
• Resistors in series*.
• Resistors in parallel*.
• Resistor combinations*.
• Internal resistance of a battery*.
• Practice reading an analog multimeter
• Electrical power in circuits

• Base plate, EL1
• Battery holder with 3 AA batteries
• Glass beaker
• Couplings
• Cover for holding electrodes
• Zinc plate electrode, EL1
• Copper plate electrode, EL1
• Relay on base
• Compass
• Material samples in container, EL1
• Bidirectional switch
• Plug-in component with toggle switches
• Jumpers, red
• Connectors
• Plug-in component with Cr-Ni filament
• Plug-in component with resistor R1
• Plug-in component with resistor R2
• Plug-in component with resistor R3
• Plug-in components with clamp terminals
• Plug-in components with bulbs
• Connecting wire, 25 cm, red
• Connecting wire, 25 cm, blue
• Accessories already available for OG1 (item II.2)
• Low-voltage power supply

• Analog multimeter
• 9 V battery
• Sulfuric acid 2%, pure, 1 liter

• Student workbook EL1
• Teacher's manual EL1

• Set of materials dedicated to the study of electrostatics, magnetostatics and induction. Optimized selection of 21 experiments directly inspired by international curricula on the subject.
• All equipment must be stored in a case with a captive lid and built-in hinged handle.
• The lid closes with a patented bayonet locking system, enabling several boxes to be firmly joined together to form a stable stack that can be transported with just one hand.
• To remove a box from the stack, simply lift the central locking system.
• Inside the box, a foam insert with pre-formed compartments ensures long-term storage of components.
• The set is accompanied by educational literature in the form of manuals with student and teacher books supplied in electronic form for easy reproduction.

• Ferromagnetic materials
• Magnetic poles
• Elementary magnetism
• Magnetic effects
• Action-reaction principle applied to magnetism
• Magnetic field lines of magnets
• Magnetic field lines of coils**
• Operational and non-operational magnetic systems**
• Ferromagnetic measuring system**
• Electrostatic force
• Electroscope
• Sign of an electric charge
• Electromagnetic induction I*
• Electromagnetic induction II**
• Lorentz force**
• Lenz's law**
• Self-induction
• Transformer laws**
• Alternating current generators*.
• Direct current motor
• Eddy currents***

• Incandescent lamp on base
• Battery holder with 3 AA batteries
• Multi-purpose base
• Socket base
• Iron filings in sprinkler
• Metal rod 
• Cylindrical AlNiCo magnets
• Metal washers in box
• Platform for visualizing field lines
• Pivot bearing
• Needle holder
• Electroscope
• U-shaped core with yoke
• Coil with 200/400 windings
• Coil with 300/600 windings
• Plexiglas rod
• PVC rods
• Wool fabric
• Silk fabric
• Closed aluminum ring
• Open aluminum ring
• Connecting wire, 25 cm, red
• Connecting wire, 25 cm, blue
• Accessories already offered with OG1 (item II.2)
• Low-voltage power supply
• Necessary accessories already offered with EL1 set (item III.1)
• Analog multimeter (2 pcs)
• 9 V battery (2 pcs)

• EL2 student workbook
• EL2 teacher's manual

• Set of materials dedicated to the study of Lorentz force. 
• Optimized selection for 6 experiments directly inspired by international curricula on the subject.
• All equipment is stored in a box with a captive lid and built-in folding handle.
• The lid closes with a patented bayonet locking system, enabling several boxes to be firmly joined together to form a stable stack that can be transported with just one hand.
• To remove a box from the stack, simply lift the central locking system.
• Inside the box, a foam insert with pre-formed cavities ensures long-lasting storage of components.
• The set is accompanied by educational literature in the form of manuals with student and teacher books supplied in electronic form for easy reproduction.

• Vector properties of the Lorentz force
• Lorentz force and magnetic field strength
• Lorentz force and current
• Lorentz force and conductor length
• Lorentz force and angle between field and current flow
• Determining magnetic field strength

• Base plate, E4 
• Conductor plate, 25/90
• Conductor plate, 35/90
• Conductor plate, 50/90°.
• Conductor plate, 50/65°.
• Conductor plate, 50/75°.
• Straight tweezers with rounded tip
• Perspex block with pin
• Set of adjustment weights in case
• Coil
• Experimental tracks, 34 cm
• Experimental tracks, 25 cm
• ATTENTION: this set requires the multimeters, battery and power supply supplied with the EL1 & EL2 sets.
• Will Not Work Without These Accessories

• EL4 student workbook

• 6000-point multimeter
• Measurement ranges
• V AC/DC: 6V to 1000V
• A AC/DC: 600µA to 10A
• R: 600 Ohm to 60Mohm
• Capacitance: 60 nF to 6000 µF
• Frequency: 9.999Hz to 9.999kHz
• T: -20° to +780°C
• Continuity test
• Diode test
• Category: CAT III 1000V; CAT IV 600V; Protection class IP67; Standards: EN 61010-1

• Digital and analog (barograph) display 
• 50,000-point multimeter
• Integrated data logger with graphic display
• Measurement ranges
• TRMS
• V AC/DC: 500mV to 1000V
• A AC/DC: 500µA to 10A
• R: 500 ohms to 50Mohm
• Capacitance: 5 nF to 10000 µF
• Frequency 9 Hz to 10 MHz
• T: -200° to +1350°C
• Continuity test
• Diode test

Connecting wire:

• Connecting wire 4 mm with reverse side, 250 mm, blue
• Connecting wire 4 mm with backbox, 250 mm, red
• Connecting wire 4 mm with backbox, 250 mm, yellow 
• Connecting wire 4 mm with backbox, 750 mm, blue
• Connecting lead 4 mm with backbox, 750 mm, red
• Connecting wire 4 mm with backplane, 750 mm, yellow

Low-voltage power supply with dual digital display, 6-12V/5A and 0-12Vdc.

• DC output voltage: 0 to 12V with green LED for voltage regulation
• DC output currents: 3 ranges, 25mA, 250mA to 2.5A, red LED for current regulation
• AC output voltages: 6 & 12V
• AC output current: 5A
• Digital voltmeter with DC voltage display: 3 x 14 mm digits, 100mV resolution
• Digital ammeter with DC current display: 3-digit, 14 mm, resolution 100µA over 25mA, 1mA over 250mA and 10mA over 2.5A
• Outputs: 4mm safety sockets
• Protection: against short-circuit and overcurrent by built-in thermal circuit breakers (automatic reset after fault clearance) and 5A/250V and 15A/250V fuses
• Made in EUROPE (Eliminatory Criteria)
• Weight: 4.2 kg
• Dimensions: 238x218x90 mm

50MHz digital oscilloscope - 2 channels, 1GS/s specially designed for teaching purposes:

• 7" WVGA color display
• 32 automated measurements
• Dual-window FFT with simultaneous time and frequency domain views
• Trigger frequency counter, pan and zoom capability
• Innovative integrated tutorial system with lab exercises and step-by-step instructions for students
• Hz - 5 MHz function generator with power output on 4 mm connectors
• Range: 0.01Hz to 5MHz
• High signal quality
• 50 Ohm and TTL output protected up to ±60 V
• Internal or external 50 MHz reciprocal frequency meter
• 0.5 Ohms output delivering 15 W into 4 Ohms protected (against short-circuits)
• BNC shielded cable, l=750 mm
• BNC socket to 4mm plug adapter
• BNC plug/4mm socket adapter
• BNC-type T-connector
• 10x 10 Ohm single-stage resistor box
• 33 Ohm rheostat, max 3.1A with 4 mm terminals

Capacitance decade boxes:

• 5 capacity steps 
• 1% accuracy
• 100 pF to 11.111 µF
• Low temperature coefficient capacitors
• Maximum voltage 300 V= or 230 V~ 50 Hz.
• Equipped with safety sockets
• Robust switches

Inductance decade box:

• 7 inductance decades
• 5% accuracy
• 1 µH to 11.111110 H
• Q factor from 55 to 100 depending on decade
• Equipped with safety sockets
• Intermediate socket for each decade
• Robust switches

• Device for studying the cathode ray tube principle
• Integrated 64x47 mm color touch screen display
• Includes heated tungsten wire tube, plate capacitor and coils
• Various potentiometers for setting test parameters
• Enables you to perform the Thomson experiment, observe electron deflection in homogeneous magnetic or electric fields and determine the e/m ratio
• Supplied complete with 12V power supply
• All equipment must be stored in a case with a captive lid and built-in hinged handle
• The lid closes with a patented bayonet locking system, enabling several boxes to be firmly joined together to form a stable stack that can be transported with just one hand
• To remove a box from the stack, simply lift the central locking system.
• Inside the box, a foam insert with pre-formed cavities ensures long-lasting storage of components.

• Max. discharge length: 120 mm
• Voltage: 160 kV
• Disk diameter: 310 mm
• Short-circuit current: 30 µA
• Dimensions: 360x250x400 mm