Physics lab products Lab Equipment Manufacturer, Supplier and Exporter in India

• Set of materials dedicated to the study of Lorentz force. 
• Optimized selection for 6 experiments directly inspired by international curricula on the subject.
• All equipment is stored in a box with a captive lid and built-in folding handle.
• The lid closes with a patented bayonet locking system, enabling several boxes to be firmly joined together to form a stable stack that can be transported with just one hand.
• To remove a box from the stack, simply lift the central locking system.
• Inside the box, a foam insert with pre-formed cavities ensures long-lasting storage of components.
• The set is accompanied by educational literature in the form of manuals with student and teacher books supplied in electronic form for easy reproduction.

• Vector properties of the Lorentz force
• Lorentz force and magnetic field strength
• Lorentz force and current
• Lorentz force and conductor length
• Lorentz force and angle between field and current flow
• Determining magnetic field strength

• Base plate, E4 
• Conductor plate, 25/90
• Conductor plate, 35/90
• Conductor plate, 50/90°.
• Conductor plate, 50/65°.
• Conductor plate, 50/75°.
• Straight tweezers with rounded tip
• Perspex block with pin
• Set of adjustment weights in case
• Coil
• Experimental tracks, 34 cm
• Experimental tracks, 25 cm
• ATTENTION: this set requires the multimeters, battery and power supply supplied with the EL1 & EL2 sets.
• Will Not Work Without These Accessories

• EL4 student workbook

• 6000-point multimeter
• Measurement ranges
• V AC/DC: 6V to 1000V
• A AC/DC: 600µA to 10A
• R: 600 Ohm to 60Mohm
• Capacitance: 60 nF to 6000 µF
• Frequency: 9.999Hz to 9.999kHz
• T: -20° to +780°C
• Continuity test
• Diode test
• Category: CAT III 1000V; CAT IV 600V; Protection class IP67; Standards: EN 61010-1

• Digital and analog (barograph) display 
• 50,000-point multimeter
• Integrated data logger with graphic display
• Measurement ranges
• TRMS
• V AC/DC: 500mV to 1000V
• A AC/DC: 500µA to 10A
• R: 500 ohms to 50Mohm
• Capacitance: 5 nF to 10000 µF
• Frequency 9 Hz to 10 MHz
• T: -200° to +1350°C
• Continuity test
• Diode test

Connecting wire:

• Connecting wire 4 mm with reverse side, 250 mm, blue
• Connecting wire 4 mm with backbox, 250 mm, red
• Connecting wire 4 mm with backbox, 250 mm, yellow 
• Connecting wire 4 mm with backbox, 750 mm, blue
• Connecting lead 4 mm with backbox, 750 mm, red
• Connecting wire 4 mm with backplane, 750 mm, yellow

Low-voltage power supply with dual digital display, 6-12V/5A and 0-12Vdc.

• DC output voltage: 0 to 12V with green LED for voltage regulation
• DC output currents: 3 ranges, 25mA, 250mA to 2.5A, red LED for current regulation
• AC output voltages: 6 & 12V
• AC output current: 5A
• Digital voltmeter with DC voltage display: 3 x 14 mm digits, 100mV resolution
• Digital ammeter with DC current display: 3-digit, 14 mm, resolution 100µA over 25mA, 1mA over 250mA and 10mA over 2.5A
• Outputs: 4mm safety sockets
• Protection: against short-circuit and overcurrent by built-in thermal circuit breakers (automatic reset after fault clearance) and 5A/250V and 15A/250V fuses
• Made in EUROPE (Eliminatory Criteria)
• Weight: 4.2 kg
• Dimensions: 238x218x90 mm

50MHz digital oscilloscope - 2 channels, 1GS/s specially designed for teaching purposes:

• 7" WVGA color display
• 32 automated measurements
• Dual-window FFT with simultaneous time and frequency domain views
• Trigger frequency counter, pan and zoom capability
• Innovative integrated tutorial system with lab exercises and step-by-step instructions for students
• Hz - 5 MHz function generator with power output on 4 mm connectors
• Range: 0.01Hz to 5MHz
• High signal quality
• 50 Ohm and TTL output protected up to ±60 V
• Internal or external 50 MHz reciprocal frequency meter
• 0.5 Ohms output delivering 15 W into 4 Ohms protected (against short-circuits)
• BNC shielded cable, l=750 mm
• BNC socket to 4mm plug adapter
• BNC plug/4mm socket adapter
• BNC-type T-connector
• 10x 10 Ohm single-stage resistor box
• 33 Ohm rheostat, max 3.1A with 4 mm terminals

Capacitance decade boxes:

• 5 capacity steps 
• 1% accuracy
• 100 pF to 11.111 µF
• Low temperature coefficient capacitors
• Maximum voltage 300 V= or 230 V~ 50 Hz.
• Equipped with safety sockets
• Robust switches

Inductance decade box:

• 7 inductance decades
• 5% accuracy
• 1 µH to 11.111110 H
• Q factor from 55 to 100 depending on decade
• Equipped with safety sockets
• Intermediate socket for each decade
• Robust switches

• Device for studying the cathode ray tube principle
• Integrated 64x47 mm color touch screen display
• Includes heated tungsten wire tube, plate capacitor and coils
• Various potentiometers for setting test parameters
• Enables you to perform the Thomson experiment, observe electron deflection in homogeneous magnetic or electric fields and determine the e/m ratio
• Supplied complete with 12V power supply
• All equipment must be stored in a case with a captive lid and built-in hinged handle
• The lid closes with a patented bayonet locking system, enabling several boxes to be firmly joined together to form a stable stack that can be transported with just one hand
• To remove a box from the stack, simply lift the central locking system.
• Inside the box, a foam insert with pre-formed cavities ensures long-lasting storage of components.

• Max. discharge length: 120 mm
• Voltage: 160 kV
• Disk diameter: 310 mm
• Short-circuit current: 30 µA
• Dimensions: 360x250x400 mm

• LCD display
• Stainless steel weighing pan: 128 x 142 mm
• External calibration
• Capacity: 1,200 g
• Resolution: 0.1 g
• Power supply: 3x AA 1.5V battery or 230V - 50Hz 
• Dimensions: 13.5 x 20.1 x 4.1 cm
• Supplied with batteries 
• Mains adapter, with EU plug
• Calibration weight 1 kg, class M1, with certificate

• Experimental Safety, student workbook, 20 experiments.
• Physical properties of matter, student workbook, 8 experiments
• Chemical properties of matter, student workbook, 14 experiments
• Acids and Bases, Student Workbook, 19 experiments

• Box with lid, top handle for easy one-handed handling
• Patented bayonet fastener enables stacked boxes to be linked quickly and securely
• To remove the box from the stack, simply lift the central locking system
• Pre-formed foam for CH1 box equipment
• Gas lighter
• Wooden stick
• Rubber stopper, 5/9 mm
• Rubber stopper, 10/14 mm
• Rubber stopper, 14/18 mm
• Rubber stopper, 16/21 mm
• Rubber stopper, 31/38 mm
• Drilled rubber stopper, 14/18 mm, 1 hole
• Drilled rubber stopper, 16/21 mm, 1 hole
• Drilled rubber stopper, 31/38 mm, 1 hole
• Drilled rubber stopper, 31/38 mm, 2 holes
• Evaporation capsule, Ø 63 mm
• Laboratory knife
• Combustion spoon
• 50 ml graduated cylinder
• Piece of silicone tubing, 4 pcs.
• Beaker tongs
• Crucible tongs
• Tweezers, straight, blunt
• Pipe tongs
• Universal tweezers
• Nipple pipette
• Spatula
• Test tube forceps, wooden
• Digital thermometer, -50 to +300 °C
• Glass rod, short
• Glass rod, long
• Transfer tube, short
• Transfer tube, long
• Cobalt glass, 50 x 50 mm
• Watch glass, Ø 60 mm

• Set of basic equipment required for chemistry experiment sets.

• Box with lid, top handle for easy one-handed handling
• Patented bayonet fastener allows stacked boxes to be quickly and securely linked together
• To remove the box from the stack, simply lift the central locking system
• Preformed foam for CH2 case equipment
• 25 ml beaker, borosilicate glass
• 150 ml beaker, borosilicate glass
• 250 ml beaker, borosilicate glass
• Petri dish, Ø 80 mm
• Glass funnel
• Erlenmeyer flask 100 ml 
• Glycerine, 50 ml dropper bottle
• Safety glasses
• Mortar, Ø 80 mm
• Filter paper, Ø 150 mm, 100 Pcs
• Indicator paper, pH range 1-11, roll 5 m
• Pestle
• Washbowl 250 ml
• Glass plate
• Test tube holder, aluminum
• Test tube with side olive
• Test tube, borosilicate glass, Ø12 x 100 mm
• Test tube, borosilicate glass, Ø16 x 160 mm
• Straight glass tube, 80 mm

• Each kit includes:
• Piezoelectric gas lighter
• Stand ring, Ø13 cm
• Manual aspirator, for pipettes up to 2 ml, blue
• 1-liter beaker
• Low-form beaker 600 ml, 10 pcs.
• Petri dishes Ø 80 mm
• Butane cartridge burner
• Connection cable 17 cm, blue
• Connecting cable 25 cm, blue
• Connection cable 34 cm, blue
• Butane cartridge 190g, 36 Pcs
• Connection cable 17 cm, blue
• Connecting cable 25 cm, blue
• Connection cable 34 cm, blue
• Butane cartridge 190g, 36 Pcs
• Stopwatch
• Shears
• Glass tube cutter
• Crystallizer 2 liters
• Regulator for gas cartridge
• Graphite electrode
• Soft file
• Digital multimeter
• Double nut
• Pair of scissors
• Graduated pipette 1 ml, 12 Pcs
• Stainless steel tray, 47 x 36.5 cm

• The base used in certain experiments is placed in the space provided in the bottom insert of the case using the latter.
• This support is made of a 210x160 mm aluminum profile with 4 T-nuts sliding along two grooves and allowing simultaneous attachment of 2 rods that can be moved along each of them.
• Glass thermometer
• Support rod, 29 cm
• Wire gauze, 16 x 16 cm, with ceramic disc
• Glass tube, Øe 10 mm, length 50 cm, 12 Pcs

• Stirring capacity: 1 liter of water 
• Speed: 100 to 1,000 rpm
• Construction: ABS
• Diameter: 137 mm
• Power supply: 220V - 50Hz
• Supplied with Ø7x25mm magnetic bar

• DC output voltage: 0 to 12V with green LED for voltage regulation
• DC output currents: 3 ranges 25mA, 250mA and 2.5A, red LED for current regulation
• AC output voltages: 6 & 12V
• AC output current: 5A
• Digital voltmeter with DC voltage display: 3 x 14 mm digits, 100mV resolution
• Digital ammeter with DC current display: 3-digit, 14 mm, resolution 100µA over 25mA, 1mA over 250mA and 10mA over 2.5A
• Outputs: 4 mm safety sockets
• Protection: against short-circuit and overcurrent by built-in thermal circuit breakers (automatic reset after fault clearance) and 5A/250V and 15A/250V fuses
• Weight: 4.2 kg
• Dimensions: 238 x 218 x 90 mm

• Basic weighing (7 units), piece counting, % weighing
• Backlit LCD display
• Spirit level, leveling feet
• Stainless steel weighing pan: Ø 145 mm
• External calibration
• Capacity: 420 g
• Resolution: 0.01 g
• Power supply: 4x C 1.5V battery or 230V - 50Hz
• Supplied with mains adapter
• Calibration weight 200 g, class F2, with certificate

• Acetone, 1 liter
• Acetic acid 1 mol/l, 1 liter
• Glacial acetic acid, 1 liter
• Ascorbic acid, 500 g
• Hydrochloric acid 10%, 1 liter
• Hydrochloric acid 20%, 1 liter
• Citric acid, anhydrous, 2.5 kg
• Tartaric acid, 500 g
• Adhesive, roll
• Matches, cans
• Wooden chopstick, 1 bag
• Balloon, 1 bag
• Petroleum benzine, 1 liter (Reuse several times)
• Sodium bicarbonate, 1 kg
• Methylene blue solution, 250 ml
• Spool of thread
• Tealight, 1 bag
• Large candle, 4 Pcs
• Barium carbonate, 500 g
• Calcium carbonate, 1 kg
• Lithium carbonate, 250 g
• Carbon dioxide cartridge
• Cloth, 25x 150 Pcs
• Lithium chloride, 250 g
• Potassium chloride, 2.5 kg
• Sodium chloride, 5 kg
• Strontium chloride hexahydrate, 100 g
• Dropper 50 ml, 6 Pcs
• Sterile cotton swabs, 100 Pcs
• Demineralized water, 10 liters (start-up quantity, use a distiller later)
• Denatured ethanol, 1 liter
• Iron powder, 1 kg
• Aluminum foil, 200 Pcs
• Zinc foil
• Aluminum foil, 200 Pcs
• Twine, 1 roll
• Cling film, 1 roll
• Glycerine 86%, 1 liter (To be reused several times)
• Glycerin, 50 ml dropper bottle
• Disposable 30 ml beaker, 3.750 Pcs
• Kerosene oil, 1 liter (For repeated use)
• Calcium hydroxide, 500 g
• Universal pH indicator, 100 ml
• Iodine, 250 g
• Copper Wool, 250 g 
• Iron wool, 250 g
• Glass wool, 500 g
• Magnesium ribbon, 25 g (~24 m)
• Marble pieces, 2.5 kg
• Laboratory marker, 10 Pcs
• Strontium nitrate, 500 g 
• Absorbent cotton, 700 g
• Calcium oxide, 500 g
• Filter paper, Ø 150 mm, 100 Pcs
• pH indicator paper 1-14, roll 5 m
• Pumice stone, 1 kg
• Sudan Red III, solution, 250 ml
• Sucrose, 1 kg
• Syringe 20 ml, 100 Pcs
• Potassium aluminum sulfate dodecahydrate, 1 kg
• Barium sulfate, 500 g
• Calcium sulfate anhydrous, 500 g
• Copper(II) sulfate pentahydrate, 1 kg
• Sodium sulfate decahydrate, 1 kg
• Sodium potassium tartrate tetrahydrate, 5 kg
• Glass rod, Ø3 x 100 mm, 100 Pcs
• Magnesia rods, 25 Pcs
• Glass tube, Øe 6 mm, length 50 cm, 12 Pcs
• Zinc granules, 250 g
• Total position C-1