science lab equipment manufacturer

CNC Trainers

CNC Trainers Lab Equipment Manufacturer, Supplier and Exporter in India

Ray Export is a leading manufacturer and supplier of CNC Trainers in India,

Quick answer. On a CNC teaching machine the control system is the decision, not the machine. Students carry the control they learned on into their first job, so a lathe or mill fitted with the same industrial control as local industry teaches the real operator interface, offsets, datum handling and alarms, while a simplified trainer control teaches program syntax loosely and little else. Ask your employer contacts which control they run before you ask any supplier, then confirm for each code which control is fitted, in which version, how it is programmed, how many simulator seats come with it, and how long it will be supported.

Forty-four items are catalogued here, numbered CNC-0001 to CNC-0047. Most are computer-numerical-control lathes and milling machines for teaching, with two retrofit kits for converting conventional machines and two controller maintenance kits. The listing also carries hydraulic, pneumatic and robotics trainers that are not numerical control at all. Several names differ only by a trailing digit, so order by code and ask for a specification sheet against it. Unlike the rest of this site these are machine tools: they need a floor, a supply, a guard and a service arrangement, and the sections below are in the order a buyer should settle them.

What is in the listing

GroupCodes
Teaching lathesCNC-0002, 0003, 0010, 0012, 0016, 0018, 0019, and the units named Spin Train, Spinner 25, Spinner 25 3000mm and Spinner 36
Teaching millsCNC-0001, 0004, 0005, 0009, 0011, 0020, 0021, 0022, 0023, 0024, and the units named Mill Train, Smart Mill 500 and Smart Mill 600
Heavier machines described as semi-productionCNC-0028, 0029, 0030, 0031
Retrofit kits for conventional machinesCNC-0007, CNC-0008
Controller maintenance trainingCNC-0046, CNC-0047
Automation, not numerical controlCNC-0036 flexible manufacturing systems, CNC-0037 robotic arms, CNC-0044 and CNC-0045 programmable controller and operator-interface kits
Fluid power, not numerical controlCNC-0038 to CNC-0043: hydraulic, electro-hydraulic, pneumatic and electro-pneumatic trainers
Unrelated to this categoryCNC-0025, solar operations and maintenance

The control system is the decision, not the machine

Students carry the control they learned on into their first job, so the control matters more than the castings. Two codes here name a particular industrial control, and two more are maintenance kits built around named controls, which tells you the question to ask of every other code: which control is fitted, in which version?

  • Industrial control or trainer control. A machine carrying the same control as local industry teaches the operator interface, the offsets, the tool and work datum handling and the alarm behaviour a student will actually meet. A simplified or proprietary trainer control teaches program syntax loosely and little else. Ask which this is, and if it is a trainer control, ask what it does not do.
  • Which control does your local industry run? Ask your own employer contacts before you ask the supplier, then buy to that answer. This single decision does more for employability than any other specification on the page.
  • Programming route. Ask whether the machine accepts plain numerical-control code typed at the machine, conversational programming, and files from a computer-aided manufacturing system, and by what medium files are transferred.
  • Simulation seats. This is the practical constraint in a teaching workshop: one machine and a class of thirty. Ask whether offline programming or simulator software matching the control is available, how many seats, and what the licence costs each year, so the class can write and verify programs while one student cuts.
  • Long-term support. Ask how long the control will be supported and whether boards are still available, because a machine tool lasts fifteen years and its control usually does not.

Guarding and safety: specify the enclosure before the specification

These are not bench trainers. A numerically controlled machine moves a tool at a programmed rate whether or not a hand is in the way, and a student's first program is where that is discovered. For every code ask, and get the answers in writing:

  • A fully enclosed working area with an interlocked door, so that opening it stops spindle and axis motion. Ask whether the interlock can be defeated and insist that it cannot be, and ask whether the enclosure contains coolant and chips as well as the tool.
  • Emergency stop, and where. At the panel and within reach of anyone at the machine, with a stated category of stop. Ask what the machine does on power loss and on restoration.
  • Chuck and workholding safety on the lathes: whether the spindle can run with the chuck guard open, whether chuck clamping is interlocked, and what happens on air or hydraulic pressure loss if the chuck is powered.
  • Chips and coolant. Hot swarf and coolant mist are the two things a workshop underestimates. Ask how chips are collected and removed, whether mist extraction is fitted or needed, what coolant is specified, and how it is changed and disposed of.
  • Eye protection and housekeeping are for you to enforce, but ask whether the supplier provides operator training and a safe-operating procedure document with the machine, and whether instructor familiarisation is included in the price.

Installation: the part that delays commissioning

Ask for the machine weight and footprint, and add the door swing and the service access the manual requires, not just the outline. Then ask: the floor loading and whether a foundation or levelling pads are specified; the electrical supply, phases, voltage, frequency and the full-load current, since a three-phase machine built for one standard will not run on another; whether compressed air is required and at what pressure and flow, which is easy to miss and stops a tool changer or a powered chuck dead; coolant capacity and disposal; and how the machine will get from the lorry to the workshop floor, which needs the weight, the crane or forklift capacity and the door widths checked in advance. Ask who commissions it, whether that is included, and what the machine is aligned and proved against on handover.

The specification to request

For both machine types: axis travels, rapid and feed rates, spindle speed range and spindle power, positioning accuracy and repeatability with the standard those figures were measured to and a test chart for the actual machine, the tool changer type and number of positions or whether tool change is manual, and the control resolution. For lathes add the chuck size, the bar capacity through the spindle, the turning diameter and length, the tailstock, and whether a driven tool or a second axis set is offered. For mills add the table size and load, the taper, and whether a fourth axis is available.

One honest question to ask about every teaching machine: what can it actually cut, and for how long? Many machines sold as trainers are built for light instructional cutting in aluminium and plastics rather than continuous work in steel. The codes described as semi-production imply something heavier, so ask of each whether it is rated for continuous production cutting, in which materials, and what duty the warranty assumes. A machine that is asked to do production work in a teaching workshop will be the first thing in the building to fail.

CNC-0007 and CNC-0008, retrofit kits

Converting a conventional milling machine to numerical control can be good value if you already own a sound machine, and a poor bargain if you do not. Ask which machines each kit fits, in detail, and what condition the host machine must be in, since the accuracy after conversion is limited by the slides and screws it is fitted to. Ask what accuracy is achievable, who carries out the conversion and where, whether the machine can be returned to manual operation afterwards, and what the kit includes in the way of drives, motors, screws and a control. Then ask the question that is usually forgotten: what guarding does the converted machine need? A manual machine that was safe to use with an open table becomes a different proposition once the axes move under program control, and the conversion is the point at which an enclosure has to be designed in.

Items in this listing that belong elsewhere

Six codes, CNC-0038 to CNC-0043, are hydraulic and pneumatic trainers, and they are a different purchase with their own requirements: for those ask the working pressure, whether the power pack is included, the fluid specified, hose and fitting type, and the relief and isolation arrangements. CNC-0044 and CNC-0045 are programmable controller and operator-interface kits, which overlap the programmable controller trainers under Instrumentation Trainers, so compare those before ordering. CNC-0037 is a robotic arm, and two other robotic arms appear elsewhere on this site under other code series. CNC-0025 is solar operations and maintenance and has nothing to do with numerical control; ask what it is and where it properly sits.

Also worth confirming

Several product names in this listing are distinguished only by a trailing digit, and several named units appear to carry machine model names, so ask whether a given code is manufactured by Ray Export or supplied as a traded machine, and who holds the service obligation in either case. Ask also for the operator and programming manuals in English, the recommended spares list with prices, the service arrangement and response time in your country, the warranty and what it excludes, and the training included. Any accuracy, power or capacity figure quoted is confirmed in writing on the quotation; ask for the test conditions and the machine test chart.

Related ranges on this site

Maintenance and bolted-joint training is under Mechanical Lab Trainers, drives and converters under Power Electronics Trainers, programmable controllers and sensors under Instrumentation Trainers, motors under Electric Motors and workshop measuring tools under Electronics Training Tools. Fluid and thermal apparatus is under Mechanical Engineering Trainers and Other Engineering Lab Trainers. Parent range: Training Kits.

Request a quote

Say which control your local industry runs, what you intend to cut and in what quantity, and give your supply and door dimensions. For example a CNC teaching lathe with an industrial control (CNC-0010), one machine, with the test chart, the interlocked enclosure, the air requirement, the simulator seat count and the commissioning terms all confirmed in writing. Contact Ray Export for specifications, prices and lead times.

Frequently asked questions

Which CNC control should our teaching lathes and mills have?

The one your local industry runs. Two codes here name a particular industrial control and two maintenance kits (CNC-0046, CNC-0047) are built around named controls, so ask of every other code which control is fitted and in which version. If it is a trainer control, ask what it does not do. Then ask the programming route - plain code typed at the machine, conversational programming, or files from a computer-aided manufacturing system, and how files are transferred - and how long the control will be supported, because a machine tool lasts fifteen years and its control usually does not.

How can one CNC machine serve a class of thirty students?

Through simulation seats. One machine and a full class is the practical constraint of a teaching workshop, so ask whether offline programming or simulator software matching the machine's control is available, how many seats are included, and what the licence costs each year. With enough seats the class writes and verifies programs while one student cuts, and a student's first program is proved on screen rather than discovered at the spindle. Make sure the simulator matches the fitted control and version exactly, or students learn one interface and operate another.

What guarding must a CNC teaching machine have?

Specify the enclosure before the specification, in writing for every code. A fully enclosed working area with an interlocked door that stops spindle and axis motion when opened, and that cannot be defeated; the enclosure should contain coolant and chips as well as the tool. An emergency stop at the panel and within reach of anyone at the machine, with a stated category of stop, and known behaviour on power loss and restoration. On lathes, whether the spindle can run with the chuck guard open and what happens if powered chuck pressure fails. And chip removal, mist extraction and coolant disposal.

What do we need to prepare before a CNC machine is installed?

More than its outline. Ask the machine weight and footprint, then add the door swing and the service access the manual requires. Ask the floor loading and whether a foundation or levelling pads are specified; the electrical supply phases, voltage, frequency and full-load current; whether compressed air is needed and at what pressure and flow, which is easy to miss and stops a tool changer or powered chuck; and the coolant capacity and disposal. Plan the route from lorry to workshop with crane or forklift capacity and door widths, and ask who commissions the machine and what it is proved against.

Can a teaching lathe or mill be used for production work?

Usually not. Many machines sold as trainers are built for light instructional cutting in aluminium and plastics rather than continuous work in steel, and a teaching machine pushed into production will be the first thing in the building to fail. The codes described as semi-production, CNC-0028 to CNC-0031, imply something heavier, so ask of each whether it is rated for continuous production cutting, in which materials, and what duty the warranty assumes. Ask also for positioning accuracy and repeatability with the method they were measured by, and the test chart for the actual machine.

Is a CNC retrofit kit worth buying for our conventional mill?

Only if you already own a sound machine. The accuracy after conversion is limited by the slides and screws the kit is fitted to, so ask which machines CNC-0007 and CNC-0008 fit, in detail, and what condition the host machine must be in. Ask the accuracy achievable, who carries out the conversion and where, whether the machine can return to manual operation, and what the kit includes in drives, motors, screws and control. Then ask what guarding the converted machine needs: once axes move under program control, an open-table machine needs an enclosure designed in.

Key takeaways

  • The control is the decision: match the industrial control and version your local employers run.
  • Buy simulator seats with the machine: a class programs and verifies offline while one student cuts.
  • Enclosure before specification: an interlocked door that cannot be defeated, and an emergency stop within reach.
  • Compressed air is easy to miss: without it a tool changer or powered chuck stops dead.
  • Ask what it can actually cut: most trainers suit light cutting in aluminium and plastics, not continuous work in steel.
  • Not everything here is CNC: CNC-0036 to CNC-0045 are automation and fluid power trainers, and CNC-0025 is solar operations and maintenance.

About this page

Ray Export is a manufacturer and exporter of laboratory, scientific and educational equipment based at Plot No. 449, HSIIDC Industrial Area, Saha, Ambala, Haryana 133104, India. Enquiries: [email protected], +91-9817319615.

Written by Palak Mall, Senior Content Writer. Technically reviewed by Arvind Kumar, Lab Equipment Specialist, 12+ years in laboratory and testing instrumentation. Last updated: 17 October 2026.

Specifications for each machine - control and version, axis travels, spindle speed and power, positioning accuracy and repeatability with the measuring method, tool changer, enclosure and interlocks, weight, supply and compressed air - are confirmed in writing on the quotation, with the test chart for the actual machine. For certificates, standards or approvals, contact us for the latest copies of the relevant certificates. No price is quoted on this page. Listing note: forty-four items are numbered CNC-0001 to CNC-0047, so three codes in the sequence sit elsewhere; several named units are listed without codes and several names differ only by a trailing digit; CNC-0025 is solar operations and maintenance; CNC-0036 to CNC-0045 are automation and fluid power trainers, with CNC-0044 and CNC-0045 overlapping the programmable controller trainers; and further robotic arms appear under other code series.

PLC And HMI Training Kit

CNC-0044

PLC And HMI Training Kit

PLC And HMI Training Kit 2

CNC-0045

PLC And HMI Training Kit

Fanuc 0iTF Maintenance Training Kits

CNC-0046

Fanuc 0iTF Maintenance Training Kits

Siemens 828D Maintenance Training Kits

CNC-0047

Siemens 828D Maintenance Training Kits

Supply of CNC Trainers from India to Finland, France, Tanzania, Thailand, Sri Lanka, Congo, Costa Rica, Ivory Coast, Croatia, Cuba, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, United Arab Emirates (UAE, Dubai), United Kingdom (London), United States, Uruguay, Uzbekistan, Vanuatu, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma Myanmar, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia (Addis Ababa), Fiji, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Central African Republic, Chad, Chile, Colombia. Math Teaching Kit suppliers in Luxembourg, Macedonia, Madagascar, Malawi (Lilongwe), Malaysia (Kuala Lumpur), Maldives, Mali, Malta, Marshall Islands, Mauritania, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Comoros, Congo. Math Teaching Kit manufacturers in Dominican Republic, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hungary, Iceland, Indonesia, Iran, Iraq, Niger, Nigeria (Abuja), Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines (Manila), Poland, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya (Nairobi), Kiribati, Korea, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Mauritius, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Portugal, Qatar, Romania, Russia, Rwanda (Kigali). Math Teaching Kit exportets to Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Sudan, Spain, Sudan, Suriname, Swaziland, Sweden, Switzerland, Syria, Tajikistan, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda (Kampala), Ukraine, Venezuela, Vietnam, Yemen , Zambia (Lusaka), Zimbabwe
'); popupWin.document.close(); }