science lab equipment manufacturer

Automobile Testing Machines

Automobile Testing Machines Lab Equipment Manufacturer, Supplier and Exporter in India

Ray Export is a leading manufacturer and supplier of Automobile Testing Machines in India,

Quick answer. This listing serves two different buyers, so first decide which half you are buying from. Automotive component suppliers need the four test instruments: a fogging tester, a horizontal flammability tester, a coating thickness gauge and a salt spray chamber, each specified to the method your customer names. Training institutions need the diesel engine rigs, and should choose between roughly seven distinct engines on four questions: the injection technology the syllabus examines, local availability of parts and service data, a usable diagnostic interface, and a fault-insertion facility. If only one rig can be bought, common rail is usually the one, as technicians meet it on current vehicles.

What this listing holds - two unrelated halves

Eighteen records, and they belong to two different buyers. Four are materials and component test instruments for the automotive supply chain: a fogging tester for interior trim, a salt spray chamber for corrosion, a coating thickness gauge and a horizontal flammability tester for interior materials. The remaining fourteen records are diesel engine test rigs for training - and they describe about seven distinct engines rather than fourteen, because several rigs appear in the listing more than once while we tidy the catalogue data. The Ford engine rig in particular appears under four separate records. So read the engine half as a choice between roughly seven rigs, and quote the code and the full product name together so that what is confirmed on the proforma invoice is the engine you meant.

If you are an automotive supplier: the four instruments

The fogging tester is the one most suppliers do not know they need until an audit asks for it. Interior trim, foams, adhesives and plastics give off condensable volatiles, which settle as a film on the inside of the windscreen - the haze that appears on a new vehicle in the sun. Vehicle manufacturers specify a fogging limit, and the test measures it by heating a sample in a vessel and collecting the condensate on a cooled glass plate or foil. Two methods are in use: a reflectometric method measuring the loss of gloss on the glass, and a gravimetric method weighing the condensate on foil. They are different numbers and an OEM specification names one, so ask which the instrument performs, and ask about the test temperatures, the cooling arrangement and the consumables - glass plates, foils and vessel seals are what you will buy every month.

The horizontal flammability tester is a regulatory instrument rather than a development one. Vehicle interior materials have to meet a burn-rate requirement in most markets, and the test is run horizontally on a specimen in a defined cabinet with a defined flame. Specify the standard your destination market names, since the apparatus is built around it. And treat it as the plastics fire instruments are treated: burning trim materials give off irritant and toxic products, so the cabinet needs extraction ducted outside the building rather than a recirculating filter, and the position needs enough air change for a specimen that smoulders after the flame is removed. Related fire, smoke and toxicity instruments are listed under plastic testing equipment.

The coating thickness gauge measures paint and plating thickness non-destructively, by magnetic induction on steel and by eddy current on non-ferrous metals - so first confirm which substrates you need and whether the gauge handles both. Then the point that catches people out: a gauge calibrated on a flat smooth shim reads incorrectly on a curved, blasted or rough surface. Calibration on the actual substrate, with its curvature and roughness, is part of the method. Ask what calibration foils and reference plates are supplied, the measuring range and resolution, the probe options for small radii and recesses, and whether readings can be logged for a report.

The salt spray chamber is covered in detail on our oil and petroleum testing page, where a second salt chamber is listed under a different name. The short version: specify the solution, pH control, temperature, fallout collection rate and deionised water supply, plan the effluent, and remember that a salt spray result ranks coatings against each other under one artificial condition rather than predicting years of service life.

If you are equipping a training workshop: pick the engine your students will meet

All the engine rigs here are European production diesels on frames, some with electronic diesel control and two with a CAN bus network. They are properly made teaching rigs, and the decision between them should be made on four questions rather than on the engine badge.

QuestionWhy it decides the rig
Which injection technology does your syllabus examine?Unit injection and common rail are different systems with different diagnostics. Common rail is what a technician will meet on current vehicles, so if only one rig can be bought, that is usually the one
Can you get parts and service data for that engine locally?These are European engines. Injectors, sensors, filters, wiring diagrams, specification data and diagnostic software are straightforward in Europe and can be slow and expensive elsewhere. Ask us what is supplied with the rig and what you would have to source locally - and ask before the order, not after a sensor fails
Does it have a diagnostic interface you can actually use?An electronic control rig is only a teaching rig if a scan tool can talk to it. The CAN bus versions are the strongest choice for teaching network diagnostics, because the student learns the architecture of a current vehicle rather than one engine
Is there a fault-insertion facility?Diagnosis cannot be taught on a healthy engine. Ask how faults are introduced, how many there are, whether they are repeatable and whether an instructor fault key is supplied

One record describes a heavy goods vehicle engine on a rotational stand. That is a genuinely useful teaching arrangement, because a student can see the engine from underneath, but ask about the locking arrangement at each position, how the engine is balanced on the stand and what the rig weighs - a large engine on a stand that can turn is not something to improvise.

The two safety matters that govern a running engine rig

High-pressure fuel. A common rail system holds fuel at a pressure of many hundreds of bar, and the hazard that follows is specific and serious: a leak from a high-pressure line produces a fine jet that can inject fuel through skin, which is a surgical emergency rather than a cut. The rules belong in the exercise sheet in plain words: the system is depressurised before any fuel union is disturbed; a leak is never searched for with a hand and never traced along a line with fingers; a piece of card is used, with the engine stopped; nobody opens a fuel line while the engine is running or immediately after; and anyone who suspects an injection injury goes to hospital at once and says what happened. Ask what guarding covers the high-pressure lines and whether a residual-pressure release procedure is documented in the manual.

Everything a running engine needs indoors. Exhaust extraction ducted to outside, without exception - diesel exhaust is a carcinogen as well as an asphyxiant, and a classroom with the windows open is not extraction. A fuel arrangement whose quantity and storage satisfy your local rules, with the fuel kept outside the teaching area. A battery, which gives off hydrogen on charge and will deliver a very large short-circuit current, isolated before anyone works on wiring. Cooling, and an understanding of how much heat the rig puts into the room. And noise: a diesel on a frame is loud, and a running rig and a lecture do not share a room. The same questions in a general automotive context are covered on our automobile workshop page, and related sensing and control teaching equipment is in the mechatronics workshop range.

What to ask for on the quotation

For the instruments: the standard and version each implements; for the fogging tester, which method, test temperatures, cooling arrangement and consumable prices; for the flammability cabinet, the standard, specimen holder, gas supply and extraction requirement; for the thickness gauge, substrates covered, range, resolution, probes and calibration references; for the salt chamber, solution, pH control, fallout rate, water quality and effluent; and for all of them, calibration certificate, traceability and recalibration interval.

For the engine rigs: the exact engine, its injection system and model year; whether it runs or is static; fault insertion arrangement and instructor key; the diagnostic protocol and whether a scan tool is included; what documentation is supplied - service manual, wiring diagrams, specification data - and in what language; exhaust connection size and extraction volume; fuel system arrangement and capacity; whether a battery is supplied; cooling arrangement; mass, footprint, castors or stand, and whether the frame must be anchored; consumables and spares with prices and local availability for that engine; and the warranty, commissioning and local service position. Note that fuel cannot ship with the equipment and a battery may be restricted in transport, so confirm what arrives dry. For any certification stated here, contact us for the latest copies of the relevant certificates before you rely on it in a tender.

Related ranges: oil and petroleum testing for fuel and lubricant testing, plastic testing equipment for interior materials, universal testing machines for mechanical testing of components, and rubber testing equipment for hoses, seals and mountings. The full set is listed under raw products testing. For a quotation, tell us the destination country, whether you are a component supplier or a training institution, and - if it is the engine rigs - which injection technology your syllabus names.

Frequently asked questions

Which fogging test method does our fogging tester need to run?

The one your customer's specification names. Interior trim, foams, adhesives and plastics give off condensable volatiles that settle as a film on the inside of the windscreen, and the test heats a sample in a vessel and collects the condensate on a cooled glass plate or foil. There are two methods: reflectometric, measuring the loss of gloss on the glass, and gravimetric, weighing the condensate on foil. They give different numbers and an OEM specification names one, so ask which the instrument performs, the test temperatures and cooling arrangement, and budget for glass plates, foils and vessel seals as monthly consumables.

What does the horizontal flammability tester need in the room?

Extraction ducted outside the building. The test burns vehicle interior material horizontally in a defined cabinet with a defined flame, and burning trim gives off irritant and toxic products, so a recirculating filter is not enough. The position also needs enough air change for a specimen that smoulders after the flame is removed. Because this is a regulatory instrument built around a burn-rate requirement, specify the standard your destination market names before anything else, and ask about the specimen holder and gas supply. Related fire, smoke and toxicity instruments are listed under plastic testing equipment.

Why does our coating thickness gauge read wrongly on real parts?

Most often because it was calibrated on a flat, smooth shim and is then used on a curved, blasted or rough surface. Calibration on the actual substrate, with its curvature and roughness, is part of the method. The gauge works non-destructively by magnetic induction on steel and by eddy current on non-ferrous metals, so first confirm which substrates you need and whether the gauge handles both. Then ask what calibration foils and reference plates are supplied, the measuring range and resolution, probe options for small radii and recesses, and whether readings can be logged for a report.

Which diesel engine rig should a training workshop choose?

Decide on four questions rather than the engine badge. Which injection technology does your syllabus examine - unit injection and common rail are different systems with different diagnostics. Can you get injectors, sensors, filters, wiring diagrams and diagnostic software for that European engine locally, since that can be slow and expensive outside Europe? Can a scan tool actually talk to it? The CAN bus versions are strongest for teaching network diagnostics. And is there a fault-insertion facility, with an instructor fault key, because diagnosis cannot be taught on a healthy engine.

Why are there fourteen engine rig records for about seven engines?

Several rigs appear in the listing more than once while the catalogue data is tidied, and one engine rig appears under four separate records. So read the engine half as a choice between roughly seven rigs, not fourteen. When you enquire, quote the code and the full product name together, and ask for the exact engine, its injection system and model year, whether it runs or is static, and the diagnostic protocol to be stated, so that what is confirmed on the proforma invoice is the engine you meant.

What safety arrangements does a running engine rig need?

Two matters govern it. High-pressure fuel: a common rail leak can inject fuel through skin, a surgical emergency, so depressurise before disturbing any fuel union, never search for a leak by hand - use card with the engine stopped - and send anyone with a suspected injection injury to hospital at once. And the room: exhaust extraction ducted outside without exception, since open windows are not extraction; fuel stored outside the teaching area within local rules; the battery isolated before wiring work, as it gives off hydrogen on charge; plus cooling and noise control, because a running rig and a lecture cannot share a room.

Key takeaways

  • Two buyers, one listing: component test instruments for suppliers, diesel engine rigs for training workshops.
  • Fogging results depend on method: reflectometric and gravimetric give different numbers, and the OEM names one.
  • Flammability needs outside extraction: not a recirculating filter, and enough air change for a smouldering specimen.
  • Calibrate thickness gauges on the real substrate: curvature and roughness change the reading.
  • Common rail first, parts second: pick the injection system your syllabus names, then confirm parts and service data locally.
  • Confirm what arrives dry: fuel cannot ship with the equipment and a battery may be restricted in transport.

About this page

Ray Export is a manufacturer and exporter of laboratory, scientific and educational equipment based at Plot No. 449, HSIIDC Industrial Area, Saha, Ambala, Haryana 133104, India. Enquiries: [email protected], +91-9817319615.

Written by Palak Mall, Senior Content Writer. Technically reviewed by Arvind Kumar, Lab Equipment Specialist, 12+ years in laboratory and testing instrumentation. Last updated: 17 October 2026.

Specifications for each instrument and rig - the standard or method implemented, test temperatures, measuring range, engine, injection system, model year, diagnostic protocol, documentation language, exhaust and fuel arrangements - are confirmed in writing on the quotation. For calibration certificates, standards or approvals, contact us for the latest copies of the relevant certificates. No price is quoted on this page. Listing note: the eighteen records combine two unrelated product groups; the fourteen engine rig records describe about seven engines, with one rig under four separate records; a second salt chamber is listed under a different name on the oil and petroleum testing page; and this range shares its ATM code prefix and numbering with the Automotive Trainers and Models listing, so quote the code with the full product name.

Diesel Engine Rig Ford 1.8 Turbo 1

ATM-0011

Primary Technical Specifications: Typically RVA motor code or comparable. Motor Rig mounted on an independent stand finish with castors. Turning parts secured by work protects. Powder covered paint wrap up. Different Specifications: Supply Voltage: 12V DC Dimensions (WxLxH):1100 x 1200 x 1300 mm Weight: 275 kg.

Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering lab equipments, engineering equipment manufacturer india, engineering equipment india, chemical engineering lab equipments, control engineering laboratory equipments, control engineering laboratory equipment, control engineering lab equipment in Ambala, India. 


Diesel Engine Rig Vauxhall/Opel CDTI 1.9 with CAN Bus

ATM-0012

Fundamental Technical Specifications: Typically Z19DTH/DTL motor code. Euro IV outflows consistent. Fitted with producer analytic attachment (16 stick). Finish with CAN Bus framework. Motor Rig mounted on an independent stand finish with castors. Turning parts secured by work protects. Powder covered paint wrap up. Different Specifications: Supply Voltage: 12V DC Dimensions (WxLxH):1100 x 1200 x 1300 mm Weight: 295 kg.

Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering educational equipments india, engineering equipments distributors, engineering lab instruments, engineering equipments manufacturer, thermodynamics engineering equipment, engineering educational lab equipments in Ambala, India. 

Diesel Engine Rig Ford 1.8 1

ATM-0013

Primary Technical Specifications: Typically RTA/RTB motor code or comparable. Motor Rig mounted on an independent stand finish with castors. Pivoting parts secured by work watches. Powder covered paint wrap up. Different Specifications: Supply Voltage: 12V DC Dimensions (WxLxH):1100 x 1200 x 1300 mm Weight: 270 kg.

Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering lab equipments, engineering equipment manufacturer india, engineering equipment india, chemical engineering lab equipments, control engineering laboratory equipments, control engineering laboratory equipment, control engineering lab equipment in Ambala, India. 


Engine Rigs (Diesel) HGV Diesel Engine Rig On Rotational Stand Training System for Engineering Teaching

ATM-0014

Motor Rig mounted in reason manufactured edge with an inward sub-outline pivoted through 3600by a 60:1 lessening gearbox once the motor ancillaries are expelled. Turning parts secured by work monitors. Powder covered paint wrap up..

Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering educational equipments india, engineering equipments distributors, engineering lab instruments, engineering equipments manufacturer, thermodynamics engineering equipment, engineering educational lab equipments in Ambala, India.

Diesel Engine Rig Vauxhall/Opel CDTI 1.9 with CAN Bus 1

ATM-0015

Principle Technical Specifications: Typically Z19DTH/DTL motor code. Euro IV emanations consistent. Fitted with maker indicative attachment (16 stick). Finish with CAN Bus framework. Motor Rig mounted on an independent stand finish with castors. Pivoting parts secured by work watches. Powder covered paint wrap up. Different Specifications: Supply Voltage: 12V DC Dimensions (WxLxH):1100 x 1200 x 1300 mm Weight: 295 kg.

Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering lab equipments, engineering equipment manufacturer india, engineering equipment india, chemical engineering lab equipments, control engineering laboratory equipments, control engineering laboratory equipment, control engineering lab equipment in Ambala, India.


Diesel Engine Rig Citroen/Peugeot PSA Common Rail HDI 1

ATM-0016

Fundamental Technical Specifications: Typically RHY/RHZ motor code. Fitted with producer symptomatic attachment (16 stick). Motor Rig mounted on an independent stand finish with castors. Pivoting parts secured by work monitors. Powder covered paint wrap up. Different Specifications: Supply Voltage: 12V DC Dimensions (WxLxH):1100 x 1200 x 1300 mm Weight: 295 kg.

Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering lab equipments, engineering equipment manufacturer india, engineering equipment india, chemical engineering lab equipments, control engineering laboratory equipments, control engineering laboratory equipment, control engineering lab equipment in Ambala, India.

Diesel Engine Rig Ford 1.8 .

ATM-0017

Fundamental Technical Specifications: Typically RTA/RTB motor code or comparable. Motor Rig mounted on an independent stand finish with castors. Pivoting parts secured by work protects. Powder covered paint wrap up. Different Specifications: Supply Voltage: 12V DC Dimensions (WxLxH):1100 x 1200 x 1300 mm Weight: 270

Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering educational equipments india, engineering equipments distributors, engineering lab instruments, engineering equipments manufacturer, thermodynamics engineering equipment, engineering educational lab equipments in Ambala, India.


Diesel Engine Rig VAG PDI Unit Injection.

ATM-0018

Fundamental Technical Specifications: Bosch motor administration framework. Commonly ASZ motor code or comparable. Euro IV emanations consistent. Fitted with maker symptomatic attachment (16 stick). Motor Rig mounted on an independent stand finish with castors. Turning parts secured by work protects. Powder covered paint wrap up. Different Specifications: Supply Voltage: 12V DC Dimensions (WxLxH):1100 x 1200 x 1300 mm Weight: 295 kg.

Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering lab equipments, engineering equipment manufacturer india, engineering equipment india, chemical engineering lab equipments, control engineering laboratory equipments, control engineering laboratory equipment, control engineering lab equipment in Ambala, India.

Supply of Automobile Testing Machines from India to Finland, France, Tanzania, Thailand, Sri Lanka, Congo, Costa Rica, Ivory Coast, Croatia, Cuba, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, United Arab Emirates (UAE, Dubai), United Kingdom (London), United States, Uruguay, Uzbekistan, Vanuatu, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma Myanmar, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia (Addis Ababa), Fiji, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Central African Republic, Chad, Chile, Colombia. Math Teaching Kit suppliers in Luxembourg, Macedonia, Madagascar, Malawi (Lilongwe), Malaysia (Kuala Lumpur), Maldives, Mali, Malta, Marshall Islands, Mauritania, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Comoros, Congo. Math Teaching Kit manufacturers in Dominican Republic, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hungary, Iceland, Indonesia, Iran, Iraq, Niger, Nigeria (Abuja), Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines (Manila), Poland, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya (Nairobi), Kiribati, Korea, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Mauritius, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Portugal, Qatar, Romania, Russia, Rwanda (Kigali). Math Teaching Kit exportets to Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Sudan, Spain, Sudan, Suriname, Swaziland, Sweden, Switzerland, Syria, Tajikistan, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda (Kampala), Ukraine, Venezuela, Vietnam, Yemen , Zambia (Lusaka), Zimbabwe
'); popupWin.document.close(); }