science lab equipment manufacturer

Paper/Packaging Testing Equipment

Paper/Packaging Testing Equipment Lab Equipment Manufacturer, Supplier and Exporter in India

Ray Export is a leading manufacturer and supplier of Paper/Packaging Testing Equipment in India,

Quick answer. Paper and packaging testing runs in three stages - condition, material, then package and journey - and most laboratories buy the middle stage and discover the other two later. Buy the humidity chamber first, not last. Paper and board are hygroscopic, their strength and stiffness fall as humidity rises, and test standards specify a conditioned atmosphere and conditioning period for that reason; results on unconditioned specimens cannot be compared with a customer's or with your own from another season. Then choose material tests to the specification your customer names, and add box compression, drop and vibration testing when you must prove a finished pack survives its journey.

What this range covers

Twenty-seven instruments for paper, board and packaging. They divide into four jobs. Basis weight and thickness: a GSM balance, a quadrant scale for substance, a round cutter for preparing specimens, a paper thickness gauge and a paper moisture meter. Strength of the material: bursting strength, Elmendorf-type tearing strength, folding endurance in two forms, crush and edge crush, puncture resistance, bending resistance, a collapse tester and a Finch-type tester for wet strength. Strength of the package: box compression, compression strength for transport packages, a drop tester and a vibration tester for transport packages. Surface and conversion: Cobb water absorptiveness in two records, scuff resistance and rolling ball tack. A humidity chamber completes the set, and as the next section explains, it is not an optional extra.

A warning about the codes in this listing, which we would rather give you than have you discover. Most records are coded PPTE, but four use a transposed prefix, PPET, and one record sits out of numerical sequence where a digit appears to have been mistyped. Three records describe bursting strength testers, two of which have spelling errors in the product name, and two records describe a rolling ball tack tester, one of them with a digit appended to the name. On this page the code alone is not a safe identifier: quote the code and the full product name together, and ask for both to be confirmed on the proforma invoice. We are having the data corrected.

Material, Package, Journey

Paper and packaging testing runs in three stages, and most laboratories buy the middle one and discover the other two later. Knowing the sequence tells you which of the twenty-seven instruments you actually need.

StageWhat is testedInstruments here
1. ConditionThe specimens, before anything is measured. Paper is hygroscopic, and strength, stiffness and dimensions all change with moisture contentThe humidity chamber, plus the moisture meter to confirm. This stage is not optional and it is where most disputed results come from
2. MaterialThe sheet or board itself: grammage, thickness, burst, tear, fold, crush, edge crush, puncture, stiffness, water absorptivenessMost of this listing
3. Package and journeyThe made-up box or pack as it will actually ship, including its creases, flaps, print and contentsBox compression, transport package compression, drop and vibration

The point of stage three is that a box is not its board. Creasing, slotting, print varnish, stacking pattern, pallet overhang and the contents all change how a package performs, and a board that passes every material test can still produce a box that collapses in a warehouse.

Why the humidity chamber is the first purchase, not the last

Paper and board are hygroscopic: they take up and give off moisture until they balance with the air, and their properties move as they do. The strength and stiffness of board fall substantially as humidity rises, which is why a box that stacks safely in a dry laboratory can fail in a humid port warehouse, and why transport specifications care about climate at all.

The test standards deal with this by specifying a conditioned atmosphere - commonly twenty-three degrees Celsius and fifty per cent relative humidity, with a tropical alternative in some standards; confirm the figure in the standard you work to - and a conditioning period before testing. The consequences are practical. A result measured on unconditioned specimens cannot be compared with a customer's result or with your own from another season. And for board specifically, it is worth testing at the humidity your product will actually see as well as at the standard condition, because the two numbers are both true and only one of them predicts the warehouse. Ask us about the chamber capacity, temperature and humidity range, uniformity, how conditions are recorded, and the water quality the humidifier needs.

The cheapest way to know whether a box will stack

Stacking failure is the commonest packaging complaint, and there are two ways to predict it. The expensive way is a box compression tester, which crushes the finished box and gives a direct answer for that box with its print, creases and flaps. The cheap way is an edge crush tester plus a thickness gauge: edge crush resistance, caliper and box perimeter together predict box compression strength well enough for day-to-day specification work, which is why edge crush is the test most board specifications are written around.

So the sensible route for most converters is: buy the edge crush tester and the thickness gauge first, because they are quick, cheap and run on small specimens; add the box compression tester when you need to certify a finished pack, prove a stacking height to a customer, or investigate a failure. Ask of the box compression tester: the platen size against your largest box, the maximum load, the rate of platen approach, whether the platens are rigid or floating and whether the machine records the full load-deflection curve rather than just the peak - the curve shows whether the box failed by panel buckling or by crease collapse, which is what tells you how to fix it.

The material tests whose numbers travel badly

Several tests here come in incompatible versions, and the version has to be matched to the specification.

Folding endurance. Two records are listed, and folding endurance exists in more than one instrument geometry with different tension and fold angles. Results from different folding instruments are not comparable with each other, so buy the one your specification names and record which it was.

Tearing strength. The pendulum method reports tear on a specified number of plies, and the ply count and the pendulum capacity are part of the result. Ask which capacities are available, since a pendulum too large for a light paper gives poor resolution, and confirm how the instrument is checked. Note that the product name in our listing has the method name misspelled; the instrument is the standard pendulum tearing tester.

Water absorptiveness by the Cobb method. Two records are listed. The contact time is part of the result - sixty seconds, one hundred and twenty seconds and longer times are all in use and give different figures - so a Cobb value quoted without its time means little. Ask which times the apparatus supports, the test area and the roller arrangement for removing surface water, since that step is where operators differ.

Bursting strength. Covered in more detail on our hardness testing machines page, where a fourth bursting record sits: the diaphragm is a consumable, a fatigued diaphragm reads low, and clamping that is too loose lets the specimen slip. Prefer a digital instrument that captures the peak if results go onto certificates.

Transport testing is a sequence, not a single test

Drop, vibration and compression exist as a set because a journey applies all three, and the recognised transport test protocols specify them in a defined order with conditioning between stages. Buying one of the three answers one third of the question, and a package that survives a drop test can still fail from hours of resonant vibration on a lorry bed.

So decide first which protocol your customer or carrier requires, then buy to it. For the drop tester, ask the maximum package mass and dimensions, the drop height range, and how face, edge and corner drops are set up repeatably. For the vibration tester, ask the motion type and frequency range, the payload, and how the package is restrained without being over-restrained. For transport package compression, ask platen size, maximum load and whether the machine can hold a load for a long duration, since a stacking test is often a hold rather than a crush. A vibration table also appears in our wood testing machines listing, where it sits a little oddly; it is the same class of instrument.

Grammage, thickness and the two instruments people get wrong

Grammage is mass per unit area, so it needs a specimen of known area, which is what the round cutter is for, and a balance reading in the right units, which is what a GSM balance is. The quadrant scale is an older direct-reading arrangement for the same purpose. Ask which specimen area each instrument is built for and make sure the cutter and the balance agree, because a mismatch between cutter area and balance scaling produces a grammage that is wrong by a constant factor and looks entirely plausible.

Thickness is the other one. Board is compressible, so the presser foot area and the applied pressure are specified by the standard, and a general-purpose dial gauge will read differently from a paper micrometer. For corrugated board, ask whether the gauge is intended for single sheets or for combined board, since the specified foot and load differ.

What to ask for on the quotation

The standard and version each instrument implements, with the specimen size and ply count it requires; test ranges and resolutions, and for pendulum instruments the available capacities; presser foot area and pressure for thickness gauges; contact times supported for the Cobb apparatus; platen sizes, maximum loads, approach rates and whether the full curve is recorded for the compression machines; drop height range and package capacity; vibration motion type, frequency range and payload; chamber capacity, ranges, uniformity, recording and water quality for the humidity chamber; calibration certificate, traceability, parameters certified and recalibration interval; consumables with prices - diaphragms, cutting dies and blades, pendulum parts, chart or data media; services at the position, including water and drainage; nominal voltage, frequency and plug pattern; and the warranty, commissioning and local service position. For any certification stated here, contact us for the latest copies of the relevant certificates before you rely on it in a tender or an accreditation file.

Related ranges: plastic testing equipment for films, laminates and seal testing, fabric testing equipment for the conditioning and colour disciplines that apply here too, universal testing machines and tensile testing machines for tensile and ring crush work, and hardness testing machines for the fourth bursting strength record. The full set is listed under raw products testing. For a quotation, tell us the destination country, the standards and transport protocol your customers name, whether you make paper, board or finished packaging, and your expected sample throughput.

Frequently asked questions

Why should the humidity chamber be our first purchase?

Because conditioning is where most disputed results come from. Paper and board take up and give off moisture until they balance with the air, and strength, stiffness and dimensions all move as they do; a box that stacks safely in a dry laboratory can fail in a humid port warehouse. Standards therefore specify a conditioned atmosphere and conditioning period - confirm the exact figures in the standard you work to. For board, test at the humidity the product will actually see as well as the standard condition. Ask the chamber capacity, temperature and humidity range, uniformity, recording, and humidifier water quality.

Do we need a box compression tester, or is an edge crush tester enough?

For most converters, start with the edge crush tester and a thickness gauge. Edge crush resistance, caliper and box perimeter together predict box compression strength well enough for day-to-day specification work, which is why most board specifications are written around edge crush; both instruments are quick and use small specimens. Add the box compression tester when you must prove a finished pack, a stacking height, or investigate a failure. Then ask the platen size against your largest box, maximum load, approach rate, rigid or floating platens, and whether the full load-deflection curve is recorded, since it shows how the box failed.

Why don't our folding, tearing and Cobb results match our customer's?

Usually because the test version differs. Folding endurance exists in more than one instrument geometry, with different tension and fold angles, and results from different folding instruments are not comparable, so buy the one your specification names and record which it was. Pendulum tearing reports tear on a specified number of plies, and ply count and pendulum capacity are part of the result; a pendulum too large for a light paper gives poor resolution. Cobb water absorptiveness depends on contact time, with sixty, one hundred and twenty seconds and longer all in use, so a Cobb value without its time means little.

Which transport tests does our packaging need?

Decide which protocol your customer or carrier requires, then buy to it. Drop, vibration and compression exist as a set because a journey applies all three, and recognised transport protocols run them in a defined order with conditioning between stages; a package that survives a drop can still fail from hours of resonant vibration on a lorry bed. For the drop tester, ask package mass and size limits, drop height range and how face, edge and corner drops are set up repeatably. For vibration, ask motion type, frequency range, payload and restraint. For transport compression, ask whether the machine can hold a load over a long duration.

Why might our grammage or thickness readings be wrong?

Grammage is mass per unit area, so it needs a specimen of known area from the round cutter and a balance reading in the right units, the GSM balance; the quadrant scale is an older direct-reading alternative. If the cutter area and the balance scaling do not match, every grammage is wrong by a constant factor and still looks plausible, so confirm both are built for the same specimen area. Thickness is the other trap: board is compressible, so the presser foot area and applied pressure are specified, and a general dial gauge reads differently from a paper micrometer. Corrugated single sheets and combined board need different settings.

How do we order safely given the code errors on this page?

Quote the code and the full product name together, and ask for both to be confirmed on the proforma invoice. Most records are coded PPTE, but four use a transposed PPET prefix and one sits out of sequence after an apparent mistyped digit. Three records describe bursting strength testers, two with spelling errors, and a fourth is on the hardness testing machines page. For bursting strength itself, the diaphragm is a consumable, a fatigued diaphragm reads low and loose clamping lets the specimen slip, so prefer a digital instrument that captures the peak where results go onto certificates.

Key takeaways

  • Condition first: the humidity chamber is the first purchase, because unconditioned results cannot be compared.
  • A box is not its board: creases, print, stacking pattern and contents change how a pack performs.
  • Edge crush before box compression: with a thickness gauge it predicts stacking strength for everyday specification work.
  • Match the test version: folding geometry, tear ply count and Cobb contact time are all part of the result.
  • Transport testing is a sequence: drop, vibration and compression in the order your customer's protocol sets.
  • Match cutter and balance: a mismatch makes every grammage wrong by a constant, plausible-looking factor.

About this page

Ray Export is a manufacturer and exporter of laboratory, scientific and educational equipment based at Plot No. 449, HSIIDC Industrial Area, Saha, Ambala, Haryana 133104, India. Enquiries: [email protected], +91-9817319615.

Written by Palak Mall, Senior Content Writer. Technically reviewed by Arvind Kumar, Lab Equipment Specialist, 12+ years in laboratory and testing instrumentation. Last updated: 17 October 2026.

Specifications for each instrument - the standard and version implemented, specimen size and ply count, ranges, resolutions and capacities, presser foot and pressure, Cobb contact times, platen size and load, drop and vibration ranges, and chamber performance - are confirmed in writing on the quotation. For calibration certificates, standards or approvals, contact us for the latest copies of the relevant certificates. No price is quoted on this page. Listing note: four records use a transposed PPET prefix instead of PPTE and one sits out of sequence; three bursting strength records, two misspelt, with a fourth on the hardness testing page; two rolling ball tack records, one with a digit appended; the tearing tester's method name is misspelt; and a vibration table also appears in the wood testing listing.

Gsm Balance

PPTE-0001

Quadrant Scale for GSM is a basic and fast gadget which straightforwardly demonstrates the weight per join region in grams per square meter (GSM) on a division scale when an example of chose estimate is suspended from a brace settled to the pointer arm. GSM Balance measures the GSM of texture, paper, flooring, PVC film and other adaptable sheet material. The framework is provided with two formats. The GSM Balance is intended to give the weight per unit territory of material textures specifically. It comprises of a quadrant scale adjusted in estimations of GSM settled in a vertical plane on an unbending base having arrangement for leveling. A pointer pillar is turned on two gem heading at the inside purpose of the scale. An example of determined region is removed from the texture with the assistance of both of the two layouts gave (or by round shaper) and is suspended toward one side of the pointer shaft. The weight per join zone is perused specifically from the quadrant scale


Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best chemical engineering lab equipments manufacturer, chemical engineering lab equipment exporter, chemical engineering lab instruments exporter, chemical engineering lab equipments exporters, civil engineering lab instruments exporter, chemical engineering lab equipments exporter in Ambala, India.


Round Cutter

PPTE-0002

Round Cutter is utilized for the precise cutting of textures, paper, flooring and so forth. The framework is made of aluminum body for light weight. It has for imported cutting edges. It has a bolt which is utilized when the shaper isn't utilized. Elastic cushion is a discretionary extra. The instrument is done by splendid chrome plating and dim metallic paint. 


Specialized SPECIFICATIONS: 


· Area of Fabrics which is to be cut 100 cm ².

Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best chemical engineering lab equipments manufacturer, chemical engineering lab equipment exporter, chemical engineering lab instruments exporter, chemical engineering lab equipments exporters, civil engineering lab instruments exporter, chemical engineering lab equipments exporter in Ambala, India.

Box Compression Tester

PPTE-0003

Box Compression Tester measures the pressure quality of the layered box. The framework is made of an arrangement of plates one is appended to the heap estimating plan and the other is mobile plate which is move with the assistance of engine, gearbox, and screw and nut course of action, the portable plate have the office of over movement and under movement. The heap estimating course of action is advanced write. The container of which the pressure quality is to be resolved is set on the lower plate, because of the movement of the portable plate the case is compacted and the pressure stack is straightforwardly perused out on the computerized marker on the board. The redirection of the case additionally estimated with the assistance of the advanced avoidance marker. The instrument is made in two sections, one is for primary instrument and the other is the control board. A definitive test is to deciding general quality and execution of the holder. The instrument is splendid chrome plating, zinc plating, painted in metallic paints.


Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering lab equipment exporter, chemical engineering lab equipments suppliers, chemical engineering lab instruments manufacturer, chemical engineering lab equipment manufacturer, chemical engineering lab equipments supplier, chemical engineering lab equipments manufacturers in Ambala, India.


Bursting Strength Tester

PPTE-0004

The Bursting Strength Tester is intended to discover blasting quality of texture/cowhide/paper/paper board. Distinctive models are accessible in the range. A test example is held between two annular braces under adequate strain to limit slippage. The upper clipping surface which is in contact with the test examples has a nonstop winding notches. A round stomach of unadulterated gum elastic is cinched between the lower clasping plate and weight barrel so that before the stomach is extended by weight underneath it the focal point of its upper surface is beneath the plane of the clipping surface. The gear is fitted with an engine driven cam instrument, which builds liquid uprooting on the lower side of the stomach at a predefined rate. The hardware is fitted with a game plan, which consequently cuts down the weight and stops the engine on consummation of the test cycle. A most extreme perusing write weight measure gives the blasting weight. The hardware is shoddily intended to give a long and inconvenience free life. The parts are brighter chromed or painted in metallic paint to give the analyzer a tasteful appearance. For directing tests on material where one weight check does not cover the full scope of burdens experienced with the coveted precision in estimation, an uncommon model fitter with two weight measures with a segregating valve can be advertised. Advanced write weight check compose instruments are additionally accessible. Computerized write weight check with pneumatic bracing model likewise accessible.

Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering lab equipment exporter, chemical engineering lab equipments suppliers, chemical engineering lab instruments manufacturer, chemical engineering lab equipment manufacturer, chemical engineering lab equipments supplier, chemical engineering lab equipments manufacturers in Ambala, India.


Humidity Chamber

PPTE-0005

Mugginess Chamber made of cubical shape, the inward body of the chamber made of Stainless Steel, there is a Stainless Steel water tank at the base of the chamber, a submerged radiator is fitted to the tank for making Humidity. There are two wire work plate are additionally fitted to the chamber, the plate are removable, the test example are hold by the plate. There is a pivoted entryway on the front of the instrument; a glass window is fitted to the pivoted entryway. The external body is made of Mild Steel appropriately powder covered to give it an erosion safe long life. There is a control board on which computerized Humidity Controller, a Digital Temperature and Switches for cooling, warming, dampness and mains are mounted. The cooling is finished by Compressor and warming is finished by Heaters. The Temperature Sensor and Humidity Sensor are fitted inside the chamber. 


Specialized SPECIFICATIONS: 


· Size: 18" X 18" X 18" 


· Temperature Range: 20º C to 40 º C 


· Humidity Range: half to 90%


Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering lab equipments, engineering equipment manufacturer india, engineering equipment india, chemical engineering lab equipments, control engineering laboratory equipments, control engineering laboratory equipment, control engineering lab equipment in Ambala, India.


Cobb Tester

PPTE-0006

Cobb Tester is utilized for the Cobb opposition of the paper. It comprises of a metal (or firearm metal) chamber of known inside distance across and length. It has a metallic plate, which is utilized for cinching the one side of the chamber with the assistance of section and jolts. The metallic plate, which is utilized for bracing reason for existing, is glue an elastic sheet for the ideal clipping. The entire get together of the chamber and clipping game plan is rotated so natural and quick pour off the water happens. A metal roller of determined size and shape is likewise furnished with the instrument. The gear is intended to give a long and inconvenience free life; the parts are brilliant cleaned and splendid chrome platted.


Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering educational equipment, engineering equipments exporters, engineering equipments suppliers, engineering equipments supplier, engineering educational equipments, engineering equipments manufacturers in Ambala, India.


Elemdrorf Tearing Strength

PPET-0007

Elmendorf Tear Tester comprises of a metal part pendulum turned on hostile to contact metal balls over a vertical section settled on an unbending metallic base. The test example, fit as a fiddle of a rectangular, is held between two cinches, one of which is mounted on a pendulum and the other is mounted on the vertical section. The clasps are mounted in such a way, to the point that their holding faces are lined up with each other when pendulum is discharged by lifting a discharge lever the activity make the pendulum tumble down under its weight and to tear the test example at the same time. The vitality ingested amid tearing is demonstrated on a scale fitted on pendulum by a low grating pointer turned on the hub of the pendulum. A flexible blade is additionally mounted on the pendulum upper section is focused between the two clips and is utilized for making the underlying opening in the test example. A check weight is provided with the analyzer for confirmation of the scale. The instruments is done is metallic painting and splendid chrome plating to give it a consumption safe wrap up. 


Specialized SPECIFICATIONS: 


· Capacity: 1600gm/3200gm/6400gm/12800gm, 25600 gm 


· Scale Reading: 0 To 100% of range

Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering lab equipments, engineering equipment manufacturer india, engineering equipment india, chemical engineering lab equipments, control engineering laboratory equipments, control engineering laboratory equipment, control engineering lab equipment in Ambala, India.

Folding Endurance Tester

PPET-0008

With the assistance of our talented experts and sound foundation office, we have possessed the capacity to think of a scope of Folding Endurance Testers. These are created utilizing high-review parts and other material according to national standards and rules. As the name proposes, every one of our items are intended to decide the collapsing perseverance quality of paper and paperboards. Attributable to great speed, superior, basic tasks and dependability, these collapsing perseverance analyzer are generally hailed by the customers.


Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering educational equipment, engineering equipments exporters, engineering equipments suppliers, engineering equipments supplier, engineering educational equipments, engineering equipments manufacturers in Ambala, India.

Paper Thickness Gauge

PPET-0009

Seat Thickness Gauge for paper comprises of a dial micrometer (or computerized micrometer) fitted on an unbending metallic edge .the micrometer has a level round indenter, Which applies the predefined weight on the paper test whose thickness is being estimated through a dead weight .the paper test is kept on an iron block, which is in from of a level roundabout stage. The pivot of the indenter and the iron block correspond and is the same as the hub of development of the indenter. The indenter can be raised and brought down delicately onto the paper test with the assistance of a lifting lever.

Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering lab equipments, engineering equipment manufacturer india, engineering equipment india, chemical engineering lab equipments, control engineering laboratory equipments, control engineering laboratory equipment, control engineering lab equipment in Ambala, India.

Digital Bursting Strenght Tester

PPET-0010

The Bursting Strength Tester is intended to discover blasting quality of texture/calfskin/paper/paper board. A test example is held between two annular clips under adequate strain to limit slippage. The upper clasping surface which is in contact with the test examples has a consistent winding furrows. The upper clipping surface climb and around an electro-pneumatic framework. The cinching power might be balanced by changing the weight of pneumatic framework with the assistance of weight measure and weight controller. A roundabout stomach of unadulterated gum elastic is clasped between the lower clipping plate and weight barrel so that before the stomach is extended by weight underneath it the focal point of its upper surface is beneath the plane of the bracing surface. 


Specialized Details: 


Detail 


Show/Capacity 


Greatest Capacity 


50 kg/cm 


Minimum Count 


0.1 kg/cm² 


Opening in upper clip 


30.5 mm breadth 


Opening in bring down clip 


38.1 mm breadth 


Rate of liquid removal 


95 cc/minute 


Test liquid 


Glycerin 


Rigging Box 


Worm lessening write


Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering educational equipment, engineering equipments exporters, engineering equipments suppliers, engineering equipments supplier, engineering educational equipments, engineering equipments manufacturers in Ambala, India.


Supply of Paper/Packaging Testing Equipment from India to Finland, France, Tanzania, Thailand, Sri Lanka, Congo, Costa Rica, Ivory Coast, Croatia, Cuba, Cyprus, Czech Republic, Denmark, Djibouti, Dominica, Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados, United Arab Emirates (UAE, Dubai), United Kingdom (London), United States, Uruguay, Uzbekistan, Vanuatu, Belarus, Belgium, Belize, Benin, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, Brunei, Bulgaria, Burkina Faso, Burma Myanmar, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia (Addis Ababa), Fiji, Burundi, Cambodia, Cameroon, Canada, Cape Verde, Central African Republic, Chad, Chile, Colombia. Math Teaching Kit suppliers in Luxembourg, Macedonia, Madagascar, Malawi (Lilongwe), Malaysia (Kuala Lumpur), Maldives, Mali, Malta, Marshall Islands, Mauritania, Mexico, Micronesia, Moldova, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Comoros, Congo. Math Teaching Kit manufacturers in Dominican Republic, Gabon, Gambia, Georgia, Germany, Ghana, Greece, Grenada, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hungary, Iceland, Indonesia, Iran, Iraq, Niger, Nigeria (Abuja), Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru, Philippines (Manila), Poland, Ireland, Israel, Italy, Jamaica, Japan, Jordan, Kazakhstan, Kenya (Nairobi), Kiribati, Korea, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Mauritius, Nauru, Nepal, Netherlands, New Zealand, Nicaragua, Portugal, Qatar, Romania, Russia, Rwanda (Kigali). Math Teaching Kit exportets to Saint Kitts and Nevis, Saint Lucia, Saint Vincent and the Grenadines, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South Sudan, Spain, Sudan, Suriname, Swaziland, Sweden, Switzerland, Syria, Tajikistan, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda (Kampala), Ukraine, Venezuela, Vietnam, Yemen , Zambia (Lusaka), Zimbabwe
'); popupWin.document.close(); }