Quick answer. The first decision is which hardness you actually mean, because the word covers at least six unrelated measurements. This listing holds three instruments from three industries: HTM-0001, an analogue bursting strength tester for paper and board; HTM-0002, a shoe lace wear tester; and HTM-0003, a Monsanto-type tablet hardness tester, which measures breaking force. Metal hardness testers are not here: the Rockwell and Brinell machines are UTM-0007 and UTM-0012 in the universal testing machines listing. Tell us the material and the scale or method, and we will quote the right instrument.
A Rockwell, Brinell or Vickers machine for metals is not on this page, and we would rather say so in the first line than let you scroll. The Rockwell and Brinell hardness testing machines in this catalogue are filed in the universal testing machines listing, as UTM-0007 and UTM-0012. Ask for those by code and name, or tell us which scale and which material and we will quote against it. We are having the categories corrected.
What this listing actually holds is three instruments from three different industries, coded HTM-0001 to HTM-0003: a bursting strength tester of the analogue type, which is a paper and board instrument; a wear tester for shoe laces built to a footwear research method; and a tablet hardness tester of the Monsanto type, which is a pharmaceutical instrument. The three have almost nothing to do with each other, and only one of them measures anything an engineer would call hardness.
The word hardness is used for at least six unrelated measurements across the industries this catalogue serves, and buying the wrong one is easy because the word is the same. This table is the quickest way to land on the right instrument.
| Industry | What hardness means there | Where to look |
|---|---|---|
| Metals | Resistance to indentation by a defined indenter under a defined load, reported on a named scale. Rockwell, Brinell and Vickers numbers are different scales and are not interchangeable, though approximate conversion tables exist | Universal testing machines - UTM-0007 Rockwell, UTM-0012 Brinell |
| Rubber and elastomers | Depth of penetration of a spring-loaded indenter, reported as Shore A, Shore D or IRHD. Again not interchangeable - the standard names the one to use | Rubber testing equipment, which holds eight hardness instruments |
| Flexible foam | The force needed to indent a specimen by a percentage of its thickness, which depends on specimen size and indentation depth | Foam testing equipment |
| Pharmaceutical tablets | The force needed to break the tablet. Called hardness by tradition; it is a crushing force in newtons | HTM-0003 on this page |
| Paper and board | Not hardness at all. The strength test with a similar reputation is bursting strength - the pressure a diaphragm reaches before the sheet gives way | HTM-0001 on this page, and three more records in paper and packaging testing equipment |
| Paints, finishes and coatings | Scratch or pencil hardness - the load or pencil grade that marks the film | Oil and petroleum testing, which holds the scratch hardness and flexibility instruments |
HTM-0003 is a Monsanto-type tester: a tablet is placed between two anvils and a spring-loaded screw is wound until the tablet breaks, with the force read from a scale. It is simple, needs no power, and is genuinely useful for teaching the principle and for a quick check at the tablet press.
Be clear about its limits before buying it for a quality control laboratory. A pharmacopoeial breaking-force determination normally calls for the force to be reported in newtons, with defined platen geometry and specimen orientation, and with the mean and spread of a stated number of tablets recorded. A hand-wound tester with a spring scale is difficult to use at a controlled loading rate, gives an operator-dependent reading and produces no record. A laboratory releasing batches, or facing an inspection, usually needs a motorised instrument with a calibrated force readout, a defined platen arrangement and a printout or data output. Tell us which it is for and we will quote accordingly rather than letting the cheaper instrument stand in for the one your documentation requires.
Two related points, because they are frequently confused with hardness. Breaking force is not friability, which is the loss of material when tablets tumble, and it is not disintegration or dissolution either. Those are separate instruments with separate pharmacopoeial methods; a friability tester is listed elsewhere in this catalogue, and if you need the full set for tablet testing, ask us for breaking force, friability, disintegration, thickness and weight variation together rather than one at a time.
HTM-0001 measures bursting strength: the sheet is clamped over a rubber diaphragm, hydraulic pressure is raised behind the diaphragm and the pressure at which the sheet ruptures is recorded. It is a long-established test for paper, board and some textiles, and three things decide whether the figures are trustworthy.
The diaphragm is a consumable, and a tired diaphragm reads low. Rubber stiffens and fatigues with use, and the diaphragm contributes to the pressure reading, so a diaphragm beyond its life quietly understates every sample. Ask what diaphragms cost, how many tests they are expected to last and how a replacement is checked after fitting.
Clamping matters. Too little clamping pressure and the specimen slips, giving a low result; too much can damage the sheet at the edge. Ask what clamping arrangement is used and whether the clamping force is defined and repeatable.
Analogue or digital. This record is the analogue type, where the peak is read from a gauge with a maximum-pointer. It works, but it is read by a person, so expect operator scatter and no record. The digital records in the paper and packaging testing equipment listing capture and hold the peak and can usually output it. If the result goes onto a certificate, prefer the digital route. Note also that four records across these two listings describe bursting strength testers, two of them with spelling errors in the product name, so quote the code and the full product name together and have both confirmed on the proforma invoice.
HTM-0002 is a wear tester for shoe laces built to a method from a footwear research body - the method name is given in our listing in mixed case where it is properly an acronym. It abrades a lace under tension over a defined surface for a set number of cycles, and it exists because lace failure is a common consumer complaint and a cheap lace is the easiest place for a shoe maker to lose money on returns. Ask which method version the instrument implements, what abradant it uses and what it costs, the tension and cycle rate, and how failure is judged. Footwear instruments proper - sole adhesion, toe cap impact and flexing - are listed under footwear testing equipment, and the lace material itself would normally be tested for breaking strength on a machine from the tensile testing machines range.
For the tablet tester: force range, resolution, how loading rate is controlled, platen geometry, whether force is displayed in newtons, calibration certificate and traceability, and whether a motorised alternative is available. For the bursting strength tester: pressure range, diaphragm specification and cost, clamping arrangement, whether the peak is captured or read by eye, calibration certificate and the standard it implements. For the lace wear tester: method and version, abradant, tension and cycle rate, specimen capacity. For all three: services at the position, bench space and mass, nominal voltage, frequency and plug pattern, consumables with prices and lead times, and the warranty and local service position. For any certification stated here, contact us for the latest copies of the relevant certificates before you rely on it in a tender or a regulatory file.
The full set of testing ranges is listed under raw products testing. For a quotation, tell us the destination country, the material you are testing and the standard or pharmacopoeia you work to - and if what you need is a metal hardness tester, say so and we will quote the Rockwell or Brinell machine directly rather than sending you round this page.
Not on this page. The Rockwell and Brinell hardness testing machines are filed in the universal testing machines listing as UTM-0007 and UTM-0012, and the categories are being corrected. Ask for them by code and name, or tell us the scale and the material and we will quote against it. Remember that Rockwell, Brinell and Vickers numbers are different scales and are not interchangeable, although approximate conversion tables exist, so state the scale your own specification names.
Usually not on its own. HTM-0003 holds a tablet between two anvils while a spring-loaded screw is wound until it breaks, with the force read from a scale. It needs no power and suits teaching the principle and quick checks at the tablet press. But a hand-wound tester is difficult to use at a controlled loading rate, gives an operator-dependent reading and produces no record. A laboratory releasing batches or facing inspection usually needs a motorised instrument with a calibrated force readout, defined platens and data output.
No. Tablet hardness is a breaking force, called hardness by tradition, and is normally reported in newtons. Friability is the loss of material when tablets tumble, and disintegration and dissolution are separate tests again, each with its own instrument and pharmacopoeial method. A friability tester is listed elsewhere in this catalogue. If you are equipping a laboratory for tablet testing, ask us for breaking force, friability, disintegration, thickness and weight variation together rather than one instrument at a time.
Three things. The rubber diaphragm is a consumable: it stiffens and fatigues with use and contributes to the pressure reading, so a tired diaphragm quietly understates every sample; ask how many tests one lasts and how a replacement is checked. Clamping must be defined and repeatable, since too little lets the specimen slip and too much damages its edge. And HTM-0001 is the analogue type, read from a maximum-pointer gauge, so expect operator scatter and no record; if results go on a certificate, prefer a digital tester that captures the peak.
HTM-0002 abrades a lace under tension over a defined surface for a set number of cycles, following a method from a footwear research body; the test exists because lace failure is a common consumer complaint. Ask which method version the instrument implements, what abradant it uses, the tension and cycle rate, how failure is judged and the specimen capacity. Other footwear instruments - sole adhesion, toe cap impact and flexing - are under footwear testing equipment, and lace breaking strength belongs on a tensile testing machine.
For the tablet tester: force range, resolution, how loading rate is controlled, platen geometry, whether force is displayed in newtons, and whether a motorised alternative is available. For the bursting strength tester: pressure range, diaphragm specification, clamping arrangement and whether the peak is captured or read by eye. For the lace tester: method version, abradant, tension and cycle rate. For all three: bench space and mass, supply voltage and plug pattern, consumables and local service. Contact us for the latest copies of the relevant certificates.
Ray Export is a manufacturer and exporter of laboratory, scientific and educational equipment based at Plot No. 449, HSIIDC Industrial Area, Saha, Ambala, Haryana 133104, India. Enquiries: [email protected], +91-9817319615.
Written by Palak Mall, Senior Content Writer. Technically reviewed by Arvind Kumar, Lab Equipment Specialist, 12+ years in laboratory and testing instrumentation. Last updated: 17 October 2026.
Specifications for every code, including force and pressure ranges, resolution, platen geometry and test method, are confirmed in writing on the quotation. For calibration certificates, contact us for the latest copies of the relevant certificates, and check what your own pharmacopoeia or standard requires. No price is quoted on this page. Listing notes: the metal hardness testers are filed under universal testing machines rather than here; this listing holds three unrelated instruments, only one of which measures hardness; four bursting strength records span this and the paper and packaging listing, two with spelling errors in the name; and the HTM-0002 method name is shown in mixed case where it is an acronym.
Blasting Strength Tester (Analog Type) - Bursting Strength of any material, for example, texture, calfskin, paper and so forth is its quality under multi-directional power and is characterized as the hydrostatic weight required to create happiness of the material when weight is connected at a controlled expanding rate through an elastic stomach and The& Bursting Strength Tester is intended to discover blasting quality of texture/cowhide/paper/paperboard. A test example is held between two annular cinches under adequate strain to limit slippage. The upper bracing surface has a constant winding score and the lower clasping surface has various concentric furrows. A round stomach of unadulterated gum elastic is clasped between the lower clipping plate and a weight chamber so that before the stomach is extended by weight underneath it the focal point of its upper surface is beneath the plane of the bracing surface. &civil lab supplies producers.
Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering lab equipments manufacturers, engineering lab equipments manufacturers, physics lab engineering equipment exporter, engineering educational equipment india, engineering lab equipments suppliers, engineering educational equipments supplier in Ambala, India.
Wear Tester for Shoe Laces (Satra Type) - Wear Tester For Shoe Lace The obstruction of Shoe Laces to wear and tear because of scraped spot while tying is dictated by rubbing two examples of the trim against each other under a predetermined pressure and finding the quantity of rubs which make one of the bands wear off till it breaks into two. One of the bands utilized as a part of the test is shaped into a circle and suspended from a stick in a vertical plane. One end of the second bands is held in a turning grasp. The ribbon is gone through the circle of the main trim and a predetermined dead weight suspended from its free and to keep both the circles under strain. The development of the grasp causes rubbing activity between the two bands, which proceeds till one of them comes up short. The quantity of rubs expected to cause disappointment gives a measure of the obstruction of the trim to wear. Wearing of ribbon against eye let can likewise be assessed Civil lab types of gear producers.
Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering lab equipments exporters, engineering lab equipments manufacturers in india, engineering educational equipment manufacturer, mechanical engineering lab equipments suppliers, engineering lab equipments supplier, engineering educational equipment supplier in Ambala, India.
A genuinely helpful instrument for taking speedy readings for taking snappy readings for the hardness of tablets.
Highlights:
· It is made of metal turned parts.
· Heavily chrome covered.
· The scale is 0 to 20kg and the list check and division is in 1 kg readings.
· Scale customizable for zero setting according to size of the tablets.
Contact Ray Export for your School, College Civil and Mechanical Engineering Lab Instruments. We are the best engineering lab equipments manufacturer, engineering lab equipment supplier, mechanical engineering lab equipment suppliers in india, civil engineering lab equipment suppliers, civil engineering lab equipments manufacturers, engineering equipment supplier in Ambala, India.