Quick answer. Decide first whether you are equipping teaching benches or a production bay, because that decides single-socket against gang programmer. Students programme one device each at their own bench, so one or two single-socket programmers usually serve a laboratory better than one gang unit; the eight gang programmers (ETT-0013 to ETT-0016, ETT-0022 to ETT-0025) earn their place where a department also turns out batches in a production or project workshop. Then choose by device list and interface, not by name: the superlatives in these titles - ultra-high, ultra-fast, advanced, handy - are not specifications.
Forty-one items are listed here, ETT-0001 to ETT-0041. Despite the category name there are no hand tools in it. What it actually contains is four quite different things: device programmers, which are the bulk of it, integrated circuit testers, programmable-logic trainer kits and embedded trainers. Several items share identical names, and the fuller listings for three of the four groups are elsewhere on this site, so the table below says where to look as well as what is here.
| Group | Codes | Fuller listing on this site |
|---|---|---|
| Single-socket programmers, microcontroller and memory | ETT-0001 to ETT-0012, ETT-0017, ETT-0019 to ETT-0021 | EPROM Programmer and Programmer Tester |
| Gang programmers, several devices at a time | ETT-0013 to ETT-0016, ETT-0022 to ETT-0025 | Only here |
| Ultraviolet eraser | ETT-0018 | EPROM Programmer and Programmer Tester, where the ultraviolet safety requirements are set out in full |
| Integrated circuit testers | ETT-0026 to ETT-0032 | IC Tester and Digital IC Tester |
| Programmable-logic trainer kits and a simulator | ETT-0034 to ETT-0038 | VLSI Design Training Systems |
| Embedded trainers | ETT-0039, ETT-0040, ETT-0041, all three under the same name | Embedded System Trainers |
| Named only as a word | ETT-0033, listed as "Experiments" | Ask what it is |
Fourteen single-socket programmers are listed under names built largely on superlatives, ultra-high, ultra-fast, advanced, handy. None of those is a specification. Send the supplier the list of parts your laboratory actually programmes and ask for written confirmation, part by part, plus:
Eight codes here are gang programmers, which hold several devices and programme them together. They exist for small-batch production, where the cost per programmed part matters, and they are the one group in this listing with no fuller counterpart elsewhere on the site. Before buying one for a teaching laboratory, be clear that a class does not need one: students programme one device each at their own bench, so one or two single-socket programmers usually serve a laboratory better than one gang unit. A gang programmer earns its place where a department also runs a production or project workshop turning out batches.
If that is your case, ask: how many sockets; whether all sockets programme concurrently or in sequence, which is the difference between a genuine gang programmer and a convenience fixture; whether each socket verifies independently and reports its own pass or fail, so one bad part is identified rather than the whole batch rejected; the throughput for a named device; whether the unit runs standalone from a stored image, which is what makes it usable by a production operator rather than a programmer; and whether sockets can be replaced individually, since they wear out with use.
Integrated circuit testers (ETT-0026 to ETT-0032). Seven codes including three handheld digital testers, an analogue tester and three universal testers. The important point is what these instruments can and cannot tell you: they test function against a stored library, not data sheet parameters, so a device that passes can still be out of specification, and a re-marked part that happens to pass will read as good. That is set out at length under IC Tester and Digital IC Tester, which also carries the same instruments under another code series; compare the two listings before ordering.
Programmable-logic kits (ETT-0034 to ETT-0038). A field-programmable gate array kit, a complex programmable logic device kit, two kits named after particular device families and a hardware-description-language simulator. For all of these the decisive question is the design software: which tool and which version the device needs, whether that version installs on your laboratory computers, whether the free edition covers the device, and whether a programming cable and its drivers are included. The same question, with the reasons, is under VLSI Design Training Systems. For the simulator, ask what it simulates, which language and version, how many seats and what the licence costs each year.
Embedded trainers (ETT-0039 to ETT-0041). All three carry the same name. Ask what distinguishes them and which is current, then compare against Embedded System Trainers, which lists thirty boards with the processor families named.
Quote the code, not the name: ETT-0013 and ETT-0014 carry the same name, ETT-0024 and ETT-0025 carry the same name, ETT-0039 to ETT-0041 all three carry the same name, and two names appear truncated, ETT-0004 ending in "Program" and ETT-0006 in "Serial". Where a code is named after a commercial device family, ask whether the kit is manufactured by Ray Export or supplied as a traded product and who supports it. Ask also for the manual, the supported device list as a document rather than a count, the quantity needed, the supply voltage, frequency and plug type for your country, spare sockets and adapters with prices, and the warranty. For ETT-0018, read the ultraviolet safety requirements before use: the lamp is invisible and gives no warning sensation, the lid interlock must work and must never be defeated, and the unit needs ventilation.
Programming and erasing: EPROM Programmer and Programmer Tester. Device testing: IC Tester and Digital IC Tester. The boards these devices go into: Microprocessor Trainers and Kits, Embedded System Trainers and VLSI Design Training Systems. The bench they are used at: Soldering and Desoldering Stations. Components: Electronic Components. Instruments: Testing and Measuring Lab Trainers. Parent range: Training Kits.
Send your device list and say whether you are equipping benches or a production bay, since that decides single-socket against gang. For example two universal-serial-bus programmers with in-system programming (from ETT-0017 or ETT-0020), with the device list, the update policy and the software licence confirmed in writing. Contact Ray Export for prices, device lists and lead times.
Despite the name, there are no hand tools. ETT-0001 to ETT-0041 cover single-socket programmers (ETT-0001 to ETT-0012, ETT-0017, ETT-0019 to ETT-0021), gang programmers (ETT-0013 to ETT-0016, ETT-0022 to ETT-0025), an ultraviolet eraser (ETT-0018), integrated circuit testers (ETT-0026 to ETT-0032), programmable-logic kits and a simulator (ETT-0034 to ETT-0038) and three embedded trainers (ETT-0039 to ETT-0041). ETT-0033 is listed only as Experiments, so ask what it is. For every group except the gang programmers, a fuller listing exists elsewhere on this site, so compare before ordering.
Ignore the adjectives and send the list of parts your laboratory actually programmes, asking for written confirmation part by part. Then ask how the device library is updated and whether updates are free and for how long; the socket pin count (one code names a 144-pin socket, the others do not) and the adapters for surface-mount packages; whether in-system programming through a header is supported and the cable included; and, where speed is claimed, a figure in seconds for a full programme-and-verify cycle on a named device. Ask too whether the unit can set lock bits, which is often irreversible.
Not directly. Several codes here are serial-port programmers, including ETT-0002, ETT-0004 and ETT-0006, and current computers do not have serial ports. Those units need a converter, which may or may not work with the programming software, so ask before ordering or choose the universal-serial-bus versions - for example ETT-0017 or ETT-0020 with in-system programming. Whichever you choose, ask whether it runs standalone or needs a computer, and if a computer, which operating system, whether the software licence is included and whether the drivers work on your machines.
First, whether you need one: a class does not, because students programme one device each. If your department also runs a production or project workshop, ask how many sockets there are; whether all sockets programme concurrently or in sequence, which is the difference between a genuine gang programmer and a convenience fixture; whether each socket verifies independently and reports its own pass or fail, so one bad part is identified rather than the whole batch rejected; the throughput for a named device; whether it runs standalone from a stored image; and whether sockets can be replaced individually.
The design software. ETT-0034 to ETT-0038 comprise a field-programmable gate array kit, a complex programmable logic device kit, two kits named after particular device families and a hardware-description-language simulator. For each kit, ask which tool and version the device needs, whether that version installs on your laboratory computers, whether the free edition covers the device, and whether a programming cable and its drivers are included. For the simulator, ask what it simulates, which language and version, how many seats, and the licence terms. For kits named after a commercial device family, ask who manufactures and supports them.
Possibly, so compare before ordering. ETT-0026 to ETT-0032 are seven testers - three handheld digital testers, an analogue tester and three universal testers - and the IC Tester and Digital IC Tester listing carries the same instruments under another code series. Remember that they test function against a stored library, not data sheet parameters, so a passing device can still be out of specification and a re-marked part can read as good. ETT-0039 to ETT-0041 share one name; ask what distinguishes them and compare against Embedded System Trainers, which names the processor families.
Ray Export is a manufacturer and exporter of laboratory, scientific and educational equipment based at Plot No. 449, HSIIDC Industrial Area, Saha, Ambala, Haryana 133104, India. Enquiries: [email protected], +91-9817319615.
Written by Palak Mall, Senior Content Writer. Technically reviewed by Arvind Kumar, Lab Equipment Specialist, 12+ years in laboratory and testing instrumentation. Last updated: 17 October 2026.
Every specification, including the supported device list, socket, interface, software licence and throughput, is confirmed in writing on the quotation; ask for the device list as a document rather than a count. For certificates, contact us for the latest copies of the relevant certificates. No price is quoted here. Listing defects noticed: the category is named Training Tools but holds no hand tools; ETT-0013 and ETT-0014, ETT-0024 and ETT-0025, and ETT-0039 to ETT-0041 share names; ETT-0004 and ETT-0006 have truncated names; ETT-0033 is listed only as Experiments; product titles rely on superlatives rather than specifications; and the IC testers also appear in the IC Tester and Digital IC Tester listing under another code series.
Equipment for Education, Engineering and Vocational Training - FEATURES Supports 73,295+ IC devices from 272 manufacturers and continuing. Programs devices with Vcc as low as 1.2V. Ultra fast programming speed: Programs and verifies 64 Mb NOR FLASH memory in 11.3 seconds and 1 GB NAND in 108 seconds. Built with 144 universal pin-drivers for support of today’s most complex devices. Universal and device independent socket adapters are available for various packages up to 144 pins. The programmer operates in either PC hosted mode or stand-alone mode. Under PC hosted mode, a PC controls the programmer via a high-speed USB2.0 connection to program a chip. Under stand-alone mode, the user controls the programmer via 20-characters, 4-line LCD display with 6-KEY keypad. A CF (compact flash) card stores the project files. In stand-alone mode, the user can operate multiple units to construct a concurrent multiprogramming system. ISP/ICP programming capability through optional ISP/ICP adapter. Only IC manufacturer approved programming algorithms provide high reliability. Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability. Over-current and over-voltage protection for safety of the chip and programmer hardware. Compatible with Windows Vista and Windows XP x32/x64 Includes the following advanced and powerful software functions: Chip operation starts immediately upon proper chip inser tion in Production Mode. Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one step. Password protection provides security for project files and production volume control. Batch command combines device operations like program, verify, security into a single command at any sequence. Serial number generators are available as standard or customer-specific functions. Log file provides production quality tracking. CE and ROHS Compliant DEVICE UPDATES: XELTEK updates software and device algorithm regularly. View the latest Device List. Download the current software version free of charge at Download Center. XELTEK also adds devices upon customer’s request at its option. VOLUME PRODUCTION SOLUTIONS: By operating multiple programmers simultaneously, you can use them in a high volume production environment. Cluster the programmers for flexible and easy volume production. Optional Compact Flash card is necessary to store user data, and device algorithm in stand-alone operation. For most operations, XELTEK recommends the 256MB size. Click here for more information about Volume Production Solution HARDWARE & ELECTRICAL SPECIFICATIONS: Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, Standard Logic Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP PC interface: USB2.0 (High speed) Stand-alone memory: Compact FLASH Card Power supply: AC Adapter: Input AC 100V- 240V; Output: 12V/1.5A ITEMS INCLUDED: SuperPro 5000 Programmer with a DIP48 Adapter AC adapter Software CD USB2.0 Cable User's Manual Registration Card OPTIONAL ACCESSORIES: Adapter in various packages CF card for stand-alone operation Go to Previous message | Go to Next message | Back to Messages | Full Headers Reply Reply All Forward Forward Mail Search WelcomeInboxNewFoldersMail Options Copyright © 1994-2012 Yahoo! Inc. All rights reserved. Terms of Service - Copyright/IP Policy - Guidelines NOTICE: We collect personal information on this site.
Equipment for Education, Engineering and Vocational Training - Features: Supports 64,096 IC devices from 254 manufacturers and continuing.. Programs devices with Vcc as low as 1.2V. Ultra fast programming speed: Programs and verifies 64 Mb NOR FLASH memory in 11.3 seconds and 1 GB NAND in 108 seconds. Built with 144 universal pin-drivers for support of today’s most complex devices. Universal and device independent socket adapters available for various package types up to 144 pins. 4 independent programming modules operating concurrently for high speed programming. USB2.0 interface to a PC for high speed programming. ISP/ICP programming capability through optional ISP/ICP adapter. Only IC manufacturer approved programming algorithms provide high reliability. Vcc verification at (+5%~-5%) and (10%~-10%) enhances programming reliability. Over-current and over-voltage protection for safety of the chip and programmer hardware. Compatible with Windows Vista and Windows XP x32/x64 Includes the following advanced and powerful software functions: Chip operation starts immediately upon proper chip insertion in Production Mode. Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one step. Password protection provides security for project files and production volume control. Batch command combines device operations like program, verify, security into a single command at any sequence. Serial number generators are available as standard or customer-specific functions. Log file provides production quality tracking. DEVICE UPDATES: XELTEK updates software and device algorithm regularly. View the latest Device List . Download the current software version free of charge at Download Center . Updates are available by mail at a nominal charge. XELTEK also adds devices upon customer's request at its option. HARDWARE & ELECTRICAL SPECIFICATIONS: Device Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR & NAND) n, BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, Standard Logic. Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP,TSOPII, PSOP,TSSOP,SON,EBGA, FBGA, VFBGA, GA, CSP, SCSP etc. PC interface: USB2.0 (High speed) Stand-alone Function: None Power supply. AC Adaptor: Input AC 100V- 240V; Output: 12V/6A. ITEMS INCLUDED: Main unit with a DIP48 Adapter AC adapter Software CD USB2.0 Cable User's Manual Register Card OPTIONAL ACCESSORIES: Adaptor in varies packages CF card for stand-alone operation..
Equipment for Education, Engineering and Vocational Training - FEATURES: 5,131 devices supported and growing, E/EPROM, FLASH, Micros, EPLD, CPLD. Supports down to 1.8V low voltage devices. Allows eight chips to be programmed simultaneously. Socket modules are isolated to each other. Each module is built with 48 pin universal pin-drivers. No adapter is needed for DIL chips. No family PACK is needed for any package. Universal DIP, PLCC, QFP, TSOP, PSOP, SOIC, SSOP, SDIP, BGA, CSP adapters up to 48 pins. Device specific adapters up to 100 pins are available. Ultra-high programming speed. Programs 28F800B5 in less than 12 seconds. Stand alone or PC-hosted modes operation in one unit (Dual modes). Connects to a PC via printer port. PC hosted software is compatible with Windows XP/2000/NT/ME/9x. Built in key-pad, 16x2 LCD and FLASH memory card for algorithms and customer data file (32Mb standard and expandable to 256Mb) for stand- alone operation. Device insertion and poor-pin-contact check protect chip from damages. Over-current protection prevents pin-drivers from damages. Auto-run mode starts programming automatically upon detection of chip insertion. Free software update from internet . One-year warranty. Suitable for mass production of DVD, mobile phone, PC, printer, monitor, game player, network equipments, PDA, MP3, POS, GPS, digital camera etc. DEVICE UPDATES: XELTEK updates software and device algorithm regularly. You (can get the latest software) may download the current software version free of charge at http://www.xeltek.com/pages.php?pageid=10 Updates are available by mail at a nominal charge. XELTEK also adds devices upon customer's request at its option. Power supply : Input 100V-240VAC,Output 5VDC, 12VDC, 24VDC. Cable: DB-25 one-one (0.8m long).
Equipment for Education, Engineering and Vocational Training - DESCRIPTIONS Gang Programmer for All 8 Pin Memories is an advanced volume production programmer for 8 pin series of memories having online and off-line operation feature. Supports for 1 Master and 8 slaves. It is real 1 TO 8 Duplicators. Online programming and off-line programming for production purpose. Online operation: USB interface, you can program the master IC. It is useful for production of samples and R&D purpose. No need to make the master on any other programmer. Off-line mass production: one can use for production purpose and can copy 8 ICs simultaneously. High speed operation: SST25VF080 28 seconds (full process) Supports a variety of 8 pin series of memory: 24CXXX, 25 series of all, all the series of all. LCD display: Dynamic directed various operational processes, as well as the operation results. Synchronized three-color indicator light direct copy of the results for each instructions on the results of simultaneous buzzer. A key to trigger the operation of the process: Just click on a button to complete the order, the use of very simple and convenient. Each DIP socket supports two ICs, so that the volume is much narrower. Ultra small and beautiful. Counters: the number of successful copies of the IC count. Can be software upgrade: add greatly facilitate the future use of the device libraries the problems encountered. The metal shell. Dimensions length 220mm x width 135mm x High 24mm. Support Devices: Almost to support a full range of 24Cxx, 24LCxxx, 25Fxxx, 25Xxxx, 25VFxxxx ......
Equipment for Education, Engineering and Vocational Training - FEATURES: Gang Programmer for Serial EEPROMs is a most powerful and versatile Gang copier efficient to copy any of the Serial EEPROMS of 24 & 93 series. It is a best product recommended for mass production of PC Monitor, TELEVISION, EPABX etc. Copying facility from MASTER to 8/16 SLAVES at a time. Supports 24/93 Series Serial EEPROMs Best suited for mass production of TV, PC Monitor, EPABX etc. 16 x 2 LCD Display (backlit) 4 keys to perform Program, Verify, Blank Check, Checksum & Select. Inbuilt power supply GPROG-16X can do maximum of 8 SMD IC's at a time. Can be software upgrade: add greatly facilitate the future use of the device libraries the problems encountered. Most recent 25 series include A25L80P, EON25T80, F25L008A, W25X80 to name just few of them..
Equipment for Education, Engineering and Vocational Training - FEATURES Tests most of the 6 to 40 pin ICs in DIP package. The list includes 74/54, 40/45, 93/96 series ICs, EPROMs, RAMs, peripheral ICs, microprocessor (8088/8085/Z80/6502), miscellaneous digital ICs. Automatic testing of variety of ICs. Potential free 40 pin universal ZIF socket. 16x2 LCD Display and 12 keys for operation Battery & Mains operation Audio alarm to user whenever it is required..
Equipment for Education, Engineering and Vocational Training - FEATURES Operates on 6V battery Provision for external Adapter of 7.5V/200mA No training required, automatic operation Tests TTL, CMOS & RAMs 10 Character clear contrast LCD display Protection against wrong insertion of IC's Built-in self diagnostic Ics.
Equipment for Education, Engineering and Vocational Training - FEATURES Tests most of the ICs in DIP package. The list includes Operational amplifiers, voltage comparators, transistor arrays, optocouplers, analog switches, voltage followers, timers, A to D converters, D to A converters and miscellaneous analog ICs. Potential free 40 pin universal ZIF socket. Digital Display to show IC number, PASS & FAIL Status, Operations display. It has 12/16 keys for its operation. Battery & Mains operation Handheld size Audio alarm to user whenever it is required..
Equipment for Education, Engineering and Vocational Training - FEATURES Tests most of the 6 to 40 pin ICs in DIP package. The list includes 74/54, 40/45, 93/96 series ICs, EPROMs, RAMs, peripheral ICs, microprocessor (8088/8085/Z80/6502), miscellaneous digital ICs. Automatic testing of variety of ICs. Potential free 40 pin universal ZIF socket. Six Seven Segment Display to show IC number, PASS & FAIL Status, Operations display. It has 12/16/24 keys for its operation. Mains operation Portable size Audio alarm to user whenever it is required
Equipment for Education, Engineering and Vocational Training - Universal IC Tester is a Table-Top version, designed as a powerful tool for manufacturers, servicing engineers, R&D personnels to test a wide range of IC's of Digital, Analog, CPU & RAMs.Tests most of the 6 to 40 pin ICs in DIP package. The list includes 74/54, 40/45, 93/96 series ICs, EPROMs, RAMs, peripheral ICs, microprocessor (8088/8085/Z80/6502), operational amplifiers, voltage comparators, transistor arrays, optocouplers, analog switches, voltage followers, timers, A to D converters, D to A converters and miscellaneous analog ICs. Automatic testing of variety of ICs. Potential free 20 pin ZIF socket for testing analog ICs and 40 pin universal ZIF socket for testing digital ICs are provided. 16 character x2 line LCD dot matrix display and 16 keys keyboard for man to machine communication and easy operation. Single step mode enables the user to test the IC step by step. Self test facility to test the internal modules of the IC tester automatically at power on and also through 'SELF TEST' key of the keyboard. Audio alarm to user whenever it is required. SPECIFICATIONS IC PACK : Digital ICs up to 40 pins and analog ICs up to 20 pins in DIP package. IC TYPE : Tristate, open collector & bidirectional TTL/CMOS digital ICs also analog ICs as per list. TEST BY : Truth table comparison for digital ICs. Functional test of output for various input conditions for analog ICs. ZIF : 20 pin DIP ZIF for analog ICs and 40 pin Universal ZIF for digital ICs. KEY : 16 keys DISPLAY : 16 character x 2 line SUPPLY VOLTAGE : 230V AC..